29 April 2023 in Lighting Engineering & Power Engineering
The article is devoted to a decision-making support tool aimed at improving the efficiency of engineering infrastructure reconstruction program management in the context of developing the architecture and hierarchical structure of program work and program architecture management. As part of the study, the main components of the model are defined, which include a set of decision-maker preferences, decision-making tasks, sets of input data, and applied software components of the model. To support decision-making, the adaptive model applies the method of system modeling and forecasting the value of the objective function at a given system configuration. Forecasting is done using machine learning methods based on a dataset consisting of historical data related to existing engineering systems. The work describes the components of the redistribution of varied model parameters, which modify the model dataset based on the selected object type, which allows adapting the decision-making process to the existing program implementation goals. A description of the data post-processing process is provided, which allows the decision-maker to obtain information about the influence of the main parameters of the system on the target indicator. The main differences between the described adaptive decision support model and the currently existing tools have been determined. The application of the developed adaptive model is possible in the management of programs for the reconstruction of such engineering systems as systems of heat, gas, electricity supply, water supply and drainage, etc.
30 December 2021 in Lighting Engineering & Power Engineering
A new model for decomposition of the total power losses, which includes four components is proposed. Each of the components of the proposed model has a certain physical meaning due to the nature of electromagnetic processes in a three-phase four-wire system. Definitions to describe each of the proposed components are formulated. It is shown that each of supplementary components of the total loss power is proportional to the minimum possible loss power and to the square of the RMS value of the power, which is caused by its occurrence in three-phase four-wire power supply system, and it is inversely proportional to the mean square of the net power loss. The synthesized Matlab-model for verification of the four-component structure of power losses showed a high degree of its adequacy. The proposed model allows us to rethink the description of power losses in three-phase AC circuits and can be used in specialized measuring instruments for electrical networks monitoring. Using the information obtained in the monitoring process, it is possible to plan technical measures to reduce losses of electrical energy in the power supply system, as well as to estimate the capital costs of these measures.
30 December 2021 in Lighting Engineering & Power Engineering
The invention relates to an energy-efficient method for voltage stabilization at the electric rolling stock current collector through traction substation control means which provide a nominal voltage value during the electric train movement by an interstation section. The dependence of potential distribution in the contact wire during the electric rolling stock movement by an interstation section was investigated. Also researched and developed are the new ways of voltage stabilization at the current collector of the electric rolling stock based on synchronous (the same for two adjacent traction substations) and asynchronous paths of voltage regulation at DC buses of traction substations related to one synchronous and two asynchronous ways of voltage stabilization in the contact network with obtaining the energy performance describing them. The energy performance of the investigated methods of voltage stabilization in the contact network is compared, and the energy efficiency of each of them is determined. It is proved that the use of modern types of semiconductor converters such as an active rectifier – voltage source in the power equipment of DC traction substations will enable to implement adaptive voltage stabilization systems at the rolling stock current collector, providing nominal voltage values of traction motors on the interstation section without using additional equipment on the rolling stock and, as a consequence, justification and application of these methods is suitable for upgrading the existing and designing new traction substations.
30 December 2025 in Eastern-European Journal of Enterprise Technologies
The object of the study is the process of chemical transesterification of sunflower oil with increased mass fraction of moisture and acid value. Transesterification technology allows obtaining fats with the necessary physico-chemical properties without changing the fatty acid composition. The problem of using alkaline catalysts is rapid deactivation under the influence of impurities present in the fatty raw material. The greatest influence is exerted by moisture and fatty acids. Transesterification of sunflower oil with increased mass fraction of moisture and acid value in the presence of potassium glyceroxide, which is more resistant to deactivating impurities, was studied. Oil parameters: peroxide value 0.18 ½ O mmol/kg, acid value 0.08 mg KOH/g, mass fraction of moisture 0.05%, crystallization temperature –18.38°C. Oil samples with mass fractions of moisture from 0.1 to 0.75% (obtained by adding water) were stored for two months under the following conditions: temperature (20±2) °C, air humidity not more than 70%. After storage, the acid value was measured in each sample and transesterification was performed. The efficiency of the process was assessed by the oil crystallization temperature. The maximum values of oil indicators at which the potassium glyceroxide catalyst is effective were established: mass fraction of moisture 0.4%, acid value 0.28 mg KOH/g. At the same time, the crystallization temperature of sunflower oil is –3.95°C, which corresponds to the maximum increase in the crystallization temperature of oil as a result of transesterification. The results obtained make it possible to effectively transesterify sunflower and other types of non-standard quality oils without preliminary treatment. This will reduce the cost of production and increase the profitability of enterprises (depending on the indicators of non-standard raw materials).
30 April 2026 in Eastern-European Journal of Enterprise Technologies
The object of the study is the hydration process of walnut oil with non-standard quality indicators. Walnut oil is used in the food, cosmetic industry, and for technical purposes. Phosphorus-containing substances worsen the consumer and technological properties of oils, complicate the purification processes and use in chemical reactions. Hydration allows to remove phosphorus-containing substances by treating with water, acids, or enzyme preparations. The hydration of walnut oil with an increased mass fraction of phosphorus-containing substances, as well as moisture and volatile substances was studied. The qualitative indicators of the initial oil: mass fraction of phosphorus-containing substances (in terms of stearooleolecithin) 0.56%, mass fraction of moisture and volatile substances 0.4%, peroxide value 3.2 ½ O mmol/kg, acid value 2.5 mg KOH/g. The oil was previously subjected to water hydration under the following conditions: temperature 55°C, added water concentration 1.0%, settling time 2 h. The mass fraction of phosphorus-containing substances decreased to 0.49%. Further reduction of the mass fraction of phosphorus-containing substances was carried out using citric acid (50% solution). Rational conditions for acid hydration were established: temperature 60°C, citric acid concentration to the mass of oil 0.3%. After that, the mass fraction of phosphorus-containing substances in the hydrated oil was 0.07%. The hydrated oil was subjected to drying under vacuum conditions (95°C, 1 h). The mass fraction of moisture and volatile substances in the dried hydrated oil was 0.1%. Effective extraction of phosphorus-containing substances from the oil was achieved by gradually conducting water and acid hydration and establishing rational conditions for acid hydration. The results of the work make it possible to effectively carry out hydration of walnut oil and other oils with an increased content of phosphorus-containing substances.
28 April 2026 in PRZEGLĄD ELEKTROTECHNICZNY
Recommendations for the use of engineering management using the example of business analysis elements of the project of an automated quality management system for maintenance of distribution networks are proposed. A scheme for using databases of Distribution System Operators in the automated quality management system for maintenance of distribution networks has been developed to monitor achieved results, stimulate the achievement of better results and optimize the planning of technical operation works.