1 January 2024 in Journal of Geotechnical and Geoenvironmental Engineering
CPClaudio Giulio di Prisco
1 December 2018 in Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics
In recent years, civil engineers have started to use discrete-element modelling to simulate large-scale soil volumes thanks to technological improvements in both hardware and software. However, existing procedures to prepare ‘representative elementary volumes’ (REV) are unsatisfactory in terms of computational cost and sample homogeneity. In this work, a simple but efficient procedure to initialise large-scale discrete-element models is presented. Periodic cells are first generated with a sufficient number of particles (enough to consider the cell an REV) matching the desired particle-size distribution and equilibrated at the desired stress state, porosity and coordination number. When the cell is in equilibrium, it is replicated in space to fill the problem domain, and when the model is filled, only a small number of mechanical cycles is needed to equilibrate a large domain. The result is an equilibrated homogeneous sample at the desired initial state in a large volume.
1 March 2025 in Géotechnique
Soil layering modifies cone penetration measurements when the cone is close to layer boundaries. Transition zone and thin-layer effects appear, complicating interpretation. To help identify the mechanisms underlying transition and thin-layer effects, several series of realistic simulations of cone penetration in layered soils are presented. Cone penetration tests are simulated using fully coupled hydromechanical models solved with the particle finite-element method. A constitutive model capable of representing flow liquefaction is employed to explore the effect of embedded layers with different initial state parameter and/or hydraulic conductivity than the host soil. Sensing and development distances for tip resistance and excess pore pressure are examined, as well as the effect of layering on dissipation tests. It is shown how distortion of layer interfaces by the cone is captured, explaining several characteristics of pore pressure and dissipation records. It is also shown that looser soil states may be hidden in the tip resistance trace by simultaneous changes in soil hydraulic conductivity.
8 September 2023 in Acta Geotechnica
Anchored wire meshes are commonly adopted to stabilize potentially unstable soil slopes. This reinforcement technique, employed either as an active or a passive anchoring system, is commonly designed according to ultimate limit state approaches. In this paper, an interaction model, useful for the design of anchored wire meshes, is proposed. The model is based on the results of a series of 3D large displacement finite element numerical analyses, in which the wire mesh mechanical behaviour is modelled as either an elastic or an elastic–plastic membrane. The model is inspired to standard load–displacement curves for shallow foundations, and the wire mesh presence is taken into account by suitably modifying the bearing capacity formula. The proposed model predictions are compared with experimental punching test results. The use of the model, only requiring the definition of geometry and soil–wire mesh mechanical properties, allows the pre-design of the reinforcement system without performing ad hoc finite element numerical analyses.
6 August 2025 in Computers and Geotechnics