Гузалия Фаритовна Сагитова

Гузалия Фаритовна Сагитова

Auto-generated profile, based on publicly available information

Гузалия Фаритовна Сагитова

M. Auezov South Kazakhstan University

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2024 in Neft i Gaz
Verified
Journal Article
Closed access
MUM. Auezov South Kazakhstan University
M. Auezov South Kazakhstan University
BKBibi-Mariyam Khassankhojayeva
Bibi-Mariyam Khassankhojayeva
GSG.F. Sagitova
G.F. Sagitova
ATAyaulym Nurlankyzy Tileuberdi
Ayaulym Nurlankyzy Tileuberdi
This study presents the results of an investigation into the physicochemical properties of oil sludge, its organic fraction, and PN-6sh oil. Liquid chromatography-mass spectrometry and infrared spectroscopy were used for analysis. Based on the physico-mechanical testing of oil sludge samples from PetroKazakhstan Oil Products LLP, it was determined that the composition of the oil sludge includes organic compounds, solid inorganic components, and water. The main portion of the organic fraction of the oil sludge consists of paraffins and asphalt-resin substances. The presence of organic compounds in the oil sludge suggests a plasticizing effect when the organic fraction is introduced into rubber mixtures. The results of the physicochemical analysis of oil sludge, its organic fraction, and PN-6sh oil indicate the feasibility of replacing PN-6sh oil with the organic fraction of oil sludge in rubber formulations, offering economically efficient approaches to the production of rubber materials. As part of the research, a rubber mixture was developed for manufacturing rubber seals for water traps using the organic fraction of oil sludge as a substitute for PN-6sh oil. The developed mixtures demonstrated satisfactory physical and mechanical characteristics. It was established that the organic fraction of oil sludge can be used in doses ranging from 2.0 to 6.0 parts by weight in elastomer compositions based on SKI-3 rubber. It was shown that introducing the organic fraction of oil sludge into the elastomer composition increases the Mooney viscosity of rubber mixtures by 9.09%, while the time to reach the maximum vulcanization rate for rubber seals of water traps is reduced to 3 minutes and 9 seconds, making the tested mixture superior to the reference one. The use of a secondary product, such as the organic fraction of oil sludge, in elastomer compositions helps reduce production costs while maintaining essential performance characteristics.

29 March 2025 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
AOA. O. Orazymbetova
A. O. Orazymbetova
GSG. F. Sagitova
G. F. Sagitova
ASA. S. Sidikov
A. S. Sidikov
SSS. A. Sakibayeva
S. A. Sakibayeva
AIA. B. Issa
A. B. Issa
Zeolites, due to their unique properties, have a wide range of applications. Fillers are one of the most important components of rubber compound formulations, allowing effective impact on the complex of chemical, technological, physical-mechanical and economic indicators of rubbers. Zeolite occupies a special place in this class of fillers. The purpose of this review is to analyze existing works on the study of the properties and application of zeolites for their further study as a promoting system. In recent years, active research has been carried out to create new types of promotional systems based on mineral raw materials. A characteristic feature of inorganic adhesion promoters is their ability to slowly release metal ions, which has a positive effect on the efficiency of fastening rubber to brass-plated metal during operation. This makes it possible to introduce metal salts in significant dosages without undesirable effects, especially mineral ones, which is caused mainly by the relative cheapness of the feedstock.In this aspect, zeolites have long attracted the attention of researchers as minerals with specific properties and structural features.Of all the more than 52 mineral species and varieties of zeolites known in nature, only a few meet the requirements for use for practical purposes, namely, they form large, almost monomineral concentrations and at the same time have the corresponding useful properties: high adsorption capacity, cation capacity, acid and heat resistance. Zeolites can be considered a multi-purpose raw material due to the diversity of material and chemical compositions, textural and structural characteristics, physical, mechanical and adsorption properties. And for the successful use of any mineral raw materials in various industries, a detailed study of their textural and structural characteristics is necessary, as well as a search for new ways to increase beneficial properties using modern technological methods and techniques.

29 June 2024 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
GKG. N. Kalmatayeva
G. N. Kalmatayeva
GSG. F. Sagitova
G. F. Sagitova
SSS. A. Sakibayeva
S. A. Sakibayeva
DADina Asylbekova
Dina Asylbekova
ZSZh. K. Shukhanova
Zh. K. Shukhanova
For the first time, the possibility of replacing carbon black and stearic acid with waste from the fat and oil industry (diatomite, bleached clay) is investigated. The value of the conditional tensile strength for vulcanizates containing stearic acid is 8,26 MPa, and for the studied vulcanizates containing selected clay, it is in the range of 7,88-8,39 MPa, for those containing diatomite is 7,88-8,43 MPa. The elongation at break for the studied vulcanizates containing selected clay increases from 280% to 300%, for those containing diatomite is from 280 to 297%. A hardness according Shore is found for the studied ones containing selected clay and diatomite in the range of 64-71 conv.units, for the reference rubber of 63 conv.units.The conducted studies show that the conditional strength and tear resistance decrease when carbon black is replaced with selected clay, as well as diatomite, but the indicators remain within the permissible limits for this rubber. The main role in enhancing the regenerate is played by caoutchouc. Therefore, carbon black and stearic acid can be replaced with less active, but cheaper and environmentally friendly ingredients. Extended physico-mechanical tests of experimental rubbers led to the conclusion that is most expedient to use waste from the fat-and-oil industry in the formulation of rubber mixtures for the manufacture of under-rail laying of railway tracks, since when using waste from the fat-and-oil industry, the properties of rubbers practically do not change, comply with control standards.

8 July 2025 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
АОА. О. Оразымбетова
А. О. Оразымбетова
ГСГ. Ф. Сагитова
Г. Ф. Сагитова
АСА. С. Сидиков
А. С. Сидиков
SSS. Sakibayeva
S. Sakibayeva
ASA. Suigenbaуeva
A. Suigenbaуeva
АСА. Ж. Суйгенбаева
А. Ж. Суйгенбаева
The development of domestic rubber adhesion promoters based on mineral raw materials is a pressing task. The formation of a bond with high and stable strength in the elastomer-metal system always remains the focus of attention when creating new formulations and new ingredients. The introduction of nickel salts into the rubber mixture significantly increases the stability of the bond strength in the rubber-metal cord system under the influence of moisture, elevated temperature and sodium chloride, since in their presence the formation of weak boundary layers of ZnO/Zn(OH)2 is delayed.Interest in zeolites as fillers and adhesion promoters is caused by their ability not only to reduce costs, but also to impart qualitatively new useful properties to materials and products, and the ability to set or adjust these properties. The properties of any mineral raw material can be adjusted through modification. Thermal and chemical treatment of zeolites with solutions of acids, alkalis and salts allows modifying zeolites and purposefully changing their properties in relation to solving a particular problem. In this work, physical and chemical modification of zeolite from the Chankanai deposit was carried out. The cation exchange properties of natural zeolite Chankanai were studied. The ion exchange of the initial calcium cation was carried out with nickel cationite. The results of experimental and physicochemical analysis methods confirm the penetration of nickel ions onto the surface of the zeolite, which has a microhard structure. It was found that the degree of exchange of the Ca cation contained in the initial zeolite for Ni cations is insignificant.

25 May 2026 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
AОA. О. Оrazymbetova
A. О. Оrazymbetova
GSG. F. Sagitova
G. F. Sagitova
ASA. S. Sidikov
A. S. Sidikov
SSS. A. Sakibayeva
S. A. Sakibayeva
ASA. Zh. Suigenbaуeva
A. Zh. Suigenbaуeva
This article presents the results of a study of natural and activated zeolite from the Chankanai deposit as a filler for rubber compounds. The results of extensive scientific research aimed at analyzing the effect of mineral additives on the properties of elastomers confirm the high potential and future prospects for this area of research. The introduction of mineral additives into the rubber matrix under standard conditions improves its performance characteristics, reducing the cost of the material, improving its elastic and strength properties, and optimizing its processing properties. The goal of this work is to replace expensive fillers with more affordable alternatives while maintaining all the required properties of rubber compounds. Maintaining strength, elasticity, wear resistance, and other key performance indicators is a top priority when searching for and implementing replacements, allowing for cost reductions without compromising product quality. Therefore, the proposed ingredients must provide the same or improved properties to ensure the finished product meets standards and operating requirements. The study focuses on zeolites from the Chankanai deposit and rubbers used to produce dielectric mats, which must possess high electrical insulating properties and mechanical strength. Energy-dispersive spectroscopy was used to obtain data on the elemental composition of the zeolite powder samples studied. This information is critical, as it allows us to assess the effectiveness of zeolites as fillers in rubber production. Experimental studies have shown that vulcanizates obtained by partially replacing 40 parts by weight of white carbon with activated zeolite from the Chankanai deposit exhibit satisfactory physical and mechanical properties. This opens up new prospects for the use of natural and activated zeolites in the rubber industry, contributing to both cost reduction and improved vulcanizate quality.

28 February 2023 in Neft i Gaz
Verified
Journal Article
Closed access
SASOUTH KAZAKHSTAN UNIVERSITY NAMED AFTER M. AUEZOV
SOUTH KAZAKHSTAN UNIVERSITY NAMED AFTER M. AUEZOV
BIB.ZH. Iskendirov
B.ZH. Iskendirov
GSG.F. Sagitova
G.F. Sagitova
STS.т. Tanashev
S.т. Tanashev
АSА.U. Sarsenbayeva
А.U. Sarsenbayeva
The results of the study of the process of catalytic cracking of fuel oil on a microspherical zeolite-containing catalyst showed that the cracking of a mixture consisting of hydrotreated vacuum gas oil (85% by weight) and sulfurous fuel oil (15% by weight) leads to an increase in the yield of catalytic distillate by 5.4 – 7.7% by weight, for a mass feed rate of 2 and 4 hours 1, respectively. At the same time, there is a change in the output of all distillate components compared to their output from pure vacuum gas oil. A decrease in coke deposition on the catalyst by 1.9 – 2.6% by weight and an improvement in the quality of the products obtained were found. The content of sulfur and unsaturated hydrocarbons in gasoline obtained from hydrotreated raw materials is less, aromatic compounds are more. Light and heavy gas oils also contain significantly less sulfur. These studies will deepen the oil refining process, increase the yield of catalytic distillate and reduce the environmental burden.