23 February 2023 in IEEE Electron Device Letters
In this letter, we present high-performance tri-gate normally-off HEMTs RF power devices using MOCVD-grown thin barrier SiN/AlN/GaN heterostructures. The normally-off devices exhibit alloyed Ohmic contact resistance of about $0.35 \Omega \cdot $ mm, low threshold-voltage of 0.2 V, very high output current of 1.61 A/mm, and high peak power added efficiency (PAE) of 67.5% with drain voltage ${(}{V}_{\text {d}}{)}$ of 12 V and frequency at 3.6 GHz. Owing to the high breakdown voltage of 159 V when gate bias at −4 V, the normally-off device shows a maximum output power of 5.96 W/mm at ${V}_{\text {d}}$ = 28 V with a peak PAE of over 50% and gain of over 20 dB. The SiN/AlN/GaN epi-structures and tri-gate normally-off HEMTs demonstrated in this work show promising potential for both low-voltage and high-voltage applications.
20 May 2025 in IEEE Transactions on Electron Devices
In this work, high-performance enhancement-mode (E-mode) AlGaN/GaN high electron mobility transistors (HEMTs) on Si substrate for low-voltage RF applications were demonstrated. The thin-barrier AlGaN (7 nm) and CF4-based gate recess etching were adopted to realize a positive threshold voltage of 0.13 V. Attributing to the SiN strain layer grown by low-pressure chemical vapor deposition (LPCVD), the sheet resistance of the thin-barrier AlGaN/GaN heterostructure was reduced from 410 to 280 Ω/sq. Hence, the fabricated E-mode thin-barrier AlGaN/GaN HEMTs with regrown ohmic contacts and a small source-drain distance of 850 nm exhibit a high maximum output current of ~1.4 A/mm, a low ON-resistance of 0.5 Ω⋅mm, and a low knee voltage of 1.3 V. Pulsed I–V measurement shows that a low current collapse at 20 V drain quiescent condition of 2.1% was achieved. The continuous wave power measurement of the E-mode devices at 3.6 GHz shows a very large peak power added efficiency (PAE) over 65% with drain voltage Vds from 6 to 12 V (peak PAE of 67.21% at Vds = 6 V), a high maximum output power density (3.18 W/mm at 12 V), and a linear gain (17.4 dB at 6 V and 21.09 dB at 12 V). These excellent results show that the transistor maintains a constant high PAE and linearly increased gain and output power over the drain voltage variation range, which has great potential and advantages for low-voltage applications.
17 March 2022 in IEEE Microwave and Wireless Components Letters
This letter presents a ${K}$ -band 0.1- $\mu \text{m}$ GaN on Si 10-W high-power amplifier (HPA) for the downlink of the satellite communication system. The proposed HPA uses the driver-stage transistor to generate a half-sinusoidal waveform that is delivered to the power-stage transistor. The half-sinusoidal waveform combines the input nonlinearity of the power-stage transistor to simultaneously improve the efficiency and expand the design space of the input harmonic impedance. A simple and compact interstage matching network (ISMN) design is used to match the harmonic impedance of both driver and power-stage transistors to create the corresponding waveforms. The proposed HPA has a small size of 3.5 mm $\times3.2$ mm and operates in the frequency range of 17–20.5 GHz achieving a 22-dB gain, an average output power ( ${P}_{\mathbf {out}}$ ) of 42 dBm, and 41% power-added efficiency (PAE) in the pulsed measurement. Moreover, the proposed HPA maintains a PAE of more than 33% and output power of 40.4 dBm in continuous wave (CW) measurement.
26 February 2024 in IEEE Transactions on Electron Devices
In this work, using the multiple threshold voltages (multi- $\textit{V}_{\text{Ths}}\text{)}$ coupling technology introduces an innovative approach to leverage AlGaN/GaN-based high-electron-mobility transistor (AlGaN/GaN HEMT) for high linearity millimeter-wave (mm-W) applications. As a result of optimizing the etching depth of the recessed trench ( $\textit{H}_\textit{R}$ ), the fabricated composite HEMT demonstrated a remarkably flat transconductance ( $\textit{G}_\textit{m}$ ) plateau, and well-maintained profile of small-signal characteristics as a function of gate voltage. As a consequence, at a biased drain voltage of 10 V and a frequency of 30 GHz, the composite HEMT achieved the highest ratio of output third-order intercept point (OIP3) to DC power consumption ( $\textit{P}_{\text{DC}}\text{)}$ , denoted as (OIP3/ $\textit{P}_{\text{DC}}\text{)}$ , measuring $\sim$ 9.3 dB. Simultaneously optimizing the bias conditions, the devices showcased a remarkable combination of high one-tone saturated output power density reaching 6.5 W/mm and two-tone OIP3/ $\textit{P}_{\text{DC}}$ of $\sim$ 6.1 dB, achieved at a biased drain voltage of 25 V. The experimental results provide compelling evidence of the attractiveness of the multi- $\textit{V}_{\text{Ths}}$ coupling technique for millimeter wave RF transmitters.
9 February 2024 in IEEE Transactions on Electron Devices
This article investigates the influence of transverse geometry of sidewall gates on characteristics of AlGaN/GaN Fin-high-electron-mobility transistors (HEMTs) with rectangular HEMTs (RG-HEMTs), divergent HEMTs (DG-HEMTs), and convergent HEMTs (CG-HEMTs) sidewall gate structure. The subthreshold characteristics of the three types of devices have been compared. The pinch-off voltage of the DG-HEMTs and CG-HEMTs exhibits a slightly positive shift compared to RG-HEMTs, indicating that the pinch-off voltage depended on the smallest nanochannel width in Fin-HEMTs. What’s more, the DG-HEMT exhibits a pronounced depletion effect on channel electrons, and an enhanced gate control capability, improving the threshold voltage stability and suppressing the short-channel effects. At the source side in the channel under the gate, a high electron barrier was been observed in the DG-HEMTs, effectively blocking the injection of carriers from the source into the channel as the drain voltage increased. Additionally, at the corner from the assess region to the channel, the DG-HEMTs displayed the fastest potential rise. The effective electron transport has been enhanced in the channel, making it possible to reach an enhanced electron velocity along most of the channel length, leading to a reduced knee voltage. This conclusion has been validated through simulations of Fin-HEMTs with different channel widths. Furthermore, the DG-HEMT delivers improved DE and PAE at V $_{\text{DC}}$ $=$ 9 V.
30 September 2024 in IEEE Internet of Things Journal
This article introduces a novel power amplifier integrated active antenna (PAIAA) with increased efficiency that integrates a Class- $F {^{-}1 }$ Gallium Nitride (GaN) power amplifier (PA) and a stub-loaded wide slot antenna (SLSA) for wireless power transmission (WPT) applications. Unlike conventional PA integrated active antennas in which antennas and PAs are separately matched to 50 ohms, the input impedance of the SLSA is meticulously engineered to match the fundamental impedance and modulate harmonic impedances of the GaN transistor by optimizing the dimensions of the SLSA's stubs. This approach eliminates the output matching network (OMN), the PA's harmonic modulation network (HMN), and the antenna's input matching network (IMN), which typically incur unavoidable insertion loss but are essential for conventional Class- $F {^{-}1 }$ PAs and antennas. Consequently, it enhances the power-added efficiency (PAE) within the 3.3–3.8-GHz range and reduces the overall size of the PA integrated active antenna. Thanks to the extended design freedom offered by SLSA, precise impedance values can be achieved across a broader frequency range, resulting in increased efficiency across a larger spectrum. In addition, an innovative insertion loss measurement method for impedance matching network with a non-50- $\Omega $ port is introduced to accurately measure the Class- $F {^{-}1 }$ PA's PAE incorporated in the proposed PAIAA. The measured PAIAA demonstrates a peak PAE of 70.1%, surpassing the performances of reported integrated active antennas. The measured effective isotropic radiated power (EIRP) of the proposed PAIAA is 44.52 dBm. A conventional PA-antenna design, where an antenna and a Class- $F {^{-}1 }$ PA are separately matched to $50~\Omega $ and simply cascaded, is also designed and measured as a contrast, whose measured peak PAE and EIRP of the conventional design are only 61.5% and 43.9 dBm, respectively. The proposed PAIAA, with its increased efficiency, can be practically utilized for WPT applications in the Internet of Things (IoT), where efficiency performance is critical.