10 May 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief presents a tutorial on topologies of piezoelectric energy harvesting circuits. The latest design technologies are systematically summarized. The topologies are classified according to the energy storage devices and the input excitation. The working principles and design strategies of different topologies are compared and analyzed. Considerations such as topology generation, loss analysis and optimization, system volume and energy efficiency are also discussed.
9 June 2025 in IEEE Transactions on Power Electronics
This article presents a reconfigurable piezoelectric harvester array (RPA) designed for multi-input systems, which dynamically configures its structure based on the intensity of ambient vibrations. The proposed architecture enhances system efficiency by eliminating dc–dc converters and achieving maximum power point tracking through a single power stage. It also widens the input range by serially connecting PEH units, enabling operation at lower excitation levels. Additionally, this series connection reduces equivalent parasitic capacitance, improving flip efficiency and maximum output power improving rate (MOPIR).The proposed RPA is employed with classical parallel-synchronous switch harvesting on inductor technology and implemented using a 180 nm CMOS process. Experimental results demonstrate a conversion efficiency of up to 78%, an MOPIR of 5.93, and a minimum input voltage of 0.36 V. This highly integrated, wide-input-range, and energy-efficient scheme offers a novel approach to miniaturizing PEH systems. We present detailed design principles, operational mechanisms, and performance metrics, highlighting the RPA’s potential as a scalable and environmentally friendly solution for powering next-generation Internet of Thing devices.
18 March 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper introduces a high-performance flipping-input synchronized switch harvesting on inductor and capacitors (FI-SSHIC) piezoelectric energy harvesting interface circuit. The unique design approach involves segmenting the flipping stages, enabling the FI-SSHIC to execute 17 phase flips utilizing merely a diminutive inductor of 5μH and 8 compact capacitors. By circumventing the traditional full bridge rectifier (FBR) and streamlining the switch count, this study’s flipping efficiency soars to an impressive 96.3%. When juxtaposed with SSHC and SSHI, utilizing identical capacitor and inductor dimensions, our design yields a 15.1% and 59.3% enhancement in output power, respectively. Furthermore, the pinnacle of power efficiency exhibits a staggering 648% augmentation when compared to the ideal FBR, underscoring the advancements proffered by our proposed circuit.
15 June 2023 in IEEE Transactions on Power Electronics
This article presents a piezoelectric energy harvesting (PEH) interface circuit using a new self-bias-flip with the charge recycle (SBFR) technique without employing any additional energy reservoir. Traditional designs, including synchronous-switch harvesting on inductor (SSHI), synchronous-switch harvesting on capacitor (SSHC), synchronous electric charge extraction (SECE), etc., require additional capacitors or inductors to reverse the voltage on the PEH at the zero-crossing point. This design innovatively uses the inherent capacitors of the piezoelectric harvesters as the flipping capacitors. In order to improve the extract efficiency of the interface, the zero-crossing state is split into a charge recycle stage and a voltage-flip stage. For a piezoelectric array with $2^{n}$ PEHs, a configuration with (n-1) phases in the charge recycle stage is adopted to reduce the loss caused by direct charge neutralization. The charge redistribution loss is reduced by employing (2n+1) phases in the voltage-flip stage. The proposed principle has been implemented with discrete components and is verified by three different prototypes. The measurement results show that a flipping efficiency of 67% is achieved by utilizing SBFR with four PEHs. And the proposed interface can provide up to 5.2x improvement when compared with the full-bridge rectifier (FBR).
16 April 2026 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
This article presents a systematic design methodology for multi-input piezoelectric energy harvesting (PEH) using collaborative-flip synchronized switch harvesting on capacitors (CF-SSHCs). We address a fundamental scaling limitation: conventional synchronized switch harvesting on capacitor (SSHC) efficiency degrades as the number of parallel transducers increases due to rising equivalent capacitance. Starting from the theoretical foundations of a two-transducer single-stage topology, we develop closed-form expressions for the voltage flipping factor and power extraction that reveal a 7.4% maximum power improvement over conventional SSHC. Extending to multistage architectures, results show that an 8-stage configuration achieves 32.2% power enhancement through 33 collaborative-flipping phases. For generalized $M$ -input $N$ -stage systems, the derived analytical framework demonstrates that the maximum output power improvement ratio (MOPIR) scales from 3.8 to 9 as transducer count increases from 1 to 60 in an 8-stage implementation. We formulate an optimization algorithm for automated parameter selection and provide closed-form design equations considering practical issues, including phase asynchrony and capacitance mismatch. This work establishes a complete theoretical framework enabling systematic design of multitransducer energy harvesting interfaces rather than empirical topology exploration.