5 February 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
The best beam steering directions are estimated through beam training, which is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel array architectures and signal processing techniques are required to avoid prohibitive beam training overhead associated with large antenna arrays and narrow beams. In this work, we leverage recent developments in true-time-delay (TTD) arrays with large delay-bandwidth products to accelerate beam training using frequency-dependent probing beams. We propose and study two TTD architecture candidates, including analog and hybrid analog-digital arrays, that can facilitate beam training with only one wideband pilot. We also propose a suitable algorithm that requires a single pilot to achieve high-accuracy estimation of angle of arrival. The proposed array architectures are compared in terms of beam training requirements and performance, robustness to practical hardware impairments, and power consumption. The findings suggest that the analog and hybrid TTD arrays achieve a sub-degree beam alignment precision with 66% and 25% lower power consumption than a fully digital array, respectively. Our results yield important design trade-offs among the basic system parameters, power consumption, and accuracy of angle of arrival estimation in fast TTD beam training.
26 July 2019 in IEEE Journal of Selected Topics in Signal Processing
Initial access (IA) is a fundamental procedure in cellular systems where user equipment (UE) detects base station (BS) and acquires synchronization. Due to the necessity of using antenna arrays for IA in millimeter-wave (mmW) systems, BS simultaneously performs beam training to acquire angular channel state information. The state-of-the-art directional IA (DIA) uses a set of narrow sounding beams in IA, where different beam pairs are sequentially measured and the best candidate is determined. However, the directional beam training accuracy depends on scanning beam angular resolution, and consequently its improvement requires additional dedicated radio resources, access latency and overhead. To remedy the problem of access latency and overhead in DIA, this work proposes to use a quasi-omni pseudorandom sounding beams for IA, and develops algorithm for joint initial access and fine resolution initial beam training without requiring additional radio resources. It comprehensively models realistic timing and frequency synchronization errors encountered in IA. We provide the analysis of the proposed algorithm miss detection rate under timing synchronization errors, and further derive Cram\'er-Rao lower bound of angular estimation under frequency offset, considering the 5G-NR compliant IA procedure. To accommodate the ever increasing bandwidth for beam training in standard evolution beyond 5G, we design the beam squint robust algorithm. For realistic performance evaluation under mmW channels, we use QuaDRiGa simulator with mmMAGIC model at 28 GHz to show that the proposed approach is advantageous to DIA. The proposed algorithm offers orders of magnitude access latency saving compared to DIA, when the same discovery, post training SNR, and overhead performance are targeted. This conclusion holds true in various propagation environments and 3D locations of a mmW pico-cell with up to 140m radius. Further, our results demonstrate that the proposed beam squint robust algorithm is able to retain unaffected performance with increased beam training bandwidth.
14 January 2022 in IEEE Journal on Selected Areas in Communications
The millimeter-wave (mmW) communications is a key enabling technology in 5G to provide ultra-high throughput. Current mmW technologies rely on analog phased arrays to realize beamforming gain and overcome high path loss. However, due to a limited number of simultaneous beams that can be created with analog/hybrid phased antenna arrays, the overheads of beam training and beam scheduling become a bottleneck for emerging networks that need to support a large number of users and low latency applications. This paper introduces rainbow-link, a novel multiple access protocol, that can achieve low latency and massive connectivity by exploiting wide bandwidth at mmW frequencies and novel analog true-time-delay array architecture with frequency dependent beamforming capability. In the proposed design, the network infrastructure is equipped with the true-time-delay array to simultaneously steer different frequency resource blocks towards distinct directions covering the entire cell sector. Users or devices, equipped with a narrowband receiver and either a single antenna or small phased antenna array, connect to the network based on their angular positions by selecting frequency resources within their rainbow beam allocation. Rainbow-link is combined with a contention-based grant-free access to eliminate the explicit beam training and user scheduling. The proposed design and analysis show that rainbow-link grant-free access is a potential candidate for latency-critical use cases within massive connectivity. Our results show that, given less than 10 −5 probability of packet loss, a rainbow-link cell, over 1 GHz bandwidth using 64 element antenna array, attains sub-millisecond user-plane latency and Mbps user rates with an approximate 400m line-of-sight coverage and a density of up to 5 active single antenna users per second per m 2 .
8 June 2022 in IEEE Journal of Solid-State Circuits
Initial access in millimeter-wave (mmW) wireless is critical toward successful realization of the fifth-generation (5G) wireless networks and beyond. Limited bandwidth in existing standards and use of phase-shifters in analog/hybrid phased-antenna arrays (PAAs) are not suited for these emerging standards demanding low-latency direction finding. This work proposes a reconfigurable true-time-delay (TTD)-based spatial signal processor (SSP) with frequency-division beam training methodology and wideband beam-squint less data communications. Discrete-time delay compensated clocking technique is used to support 800-MHz bandwidth with a large unity-gain bandwidth ring-amplifier (RAMP)-based signal combiner. To extensively characterize the proposed SSP across different SSP modes and frequency–angle pairs, an automated testbed is developed using computer vision techniques that significantly speeds up the testing progress and minimizes possible human errors. Using seven levels of time-interleaving for each of the four antenna elements, TTD SSP has a delay range of 3.8 ns over 800 MHz and achieves unique frequency-to-angle mapping in the beam training mode with nearly 12-dB frequency-independent gain in the beamforming mode. The SSP is prototyped in 65-nm CMOS with an area of 1.98 mm $^2$ consuming only 29 mW excluding buffers. Furthermore, an error vector magnitude (EVM) of 7.3% is realized for 16-QAM modulation at a speed of 614.4 Mb/s.
6 December 2012 in Electronics Letters
A novel waffle-type nLDMOS-SCR ESD clamp with compact source and drain for high-voltage ESD protection is proposed and realised using the 0.35 µm, 30/5 V bipolar-CMOS-DMOS (BCD) process. With this new structure, a high ESD failure current of 4.4 A was achieved with a total channel width of only 60 µm. Considering the area efficiency, the waffle-type structure provides more than 30% higher current handling capability than the conventional ones. Because of its better robustness and area efficiency, the waffle-type structure should be a promising layout for high-voltage ESD protection applications.