Broadband optical absorption structures in the near infrared by coupling monolayer-graphene with periodical metal structures are proposed and demonstrated numerically. Optical absorption of graphene with over-50%-absorption bandwidth up to hundreds of nanometer caused by magnetic dipole resonances and magnetic coupling effect are investigated in detail, and the demonstrated bandwidths are one order higher than those caused by dielectric guiding mode resonances. In addition, the influences of geometrical parameters of structures are fully analyzed and these demonstrated structures show angular-insensitive absorption for oblique incidence in a large angular range. The demonstrated absorption structures in this work provide new design ideas in the realization of advanced graphene-based optoelectronic devices.
In order to achieve accurate prediction of subsurface damage (SSD) in ultra-precision grinding of high-performance ultra-violet laser-irradiated fused silica optics, the paper combines damage precursor multimodal measurement technology with magnetorheological finishing spot method detection. Various methods such as photothermal weak absorption and fluorescence confocal imaging are used for measuring the surface roughness and subsurface damage depth of a series of fused silica samples prepared under different ultra-precision grinding parameters. The correlation between surface roughness and subsurface damage depth in ultra-precision grinding based on laser damage performance is established using curve fitting. The results indicate that there is a metamorphic layer below the subsurface crack layer, which can cause additional photothermal absorption. Subsurface damage is constituted of the subsurface crack layer and metamorphic layer. Under ultra-precision grinding conditions, the maximum depth of subsurface damage is generally 2.00–4.22 times the depth of the subsurface damage cluster. The roughness Ra and the subsurface damage cluster depth correspond to SSD(cluster) = 195 × Ra − 0.13. The maximum depth of subsurface damage can be predicted by measuring the Ra value, by which accurate prediction of defect depth in ultra-precision grinding and guiding the high-performance manufacturing of ultra-violet laser-irradiated fused silica optics can be achieved.
A very attractive advantage of graphene is that its Fermi level can be regulated by electrostatic bias doping. It is of great significance to investigate and control the spatial location of graphene emission for graphene thermal emitters, in addition to tuning the emission intensity and emission spectrum. Here, we present a detailed theoretical model to describe the graphene emission characteristics versus gate voltages. The experimentally observed movement of the emission spot and temperature distribution of graphene emitters are basically in agreement with those from the theoretical model. Our results provide a simple method to predict the behavior of graphene emitters that is beneficial for achieving the spatial dynamic regulation of graphene infrared emission arrays.
A kind of graphene-based perfect absorber which can generate low-threshold and high-extinction-ratio optical bistability in the near-IR band is proposed and simulated with numerical methods. The interaction between input light and monolayer graphene in the absorber can be greatly enhanced due to the perfect absorption. The large nonlinear coefficient of graphene and the strong light-graphene interaction contribute to the nonlinear response of the structure, leading to relatively low switching thresholds of less than 2.5 MW/cm2 for an absorber with a Q factor lower than 1000. Meanwhile, the extinction ratio of bistable states in the absorber reaches an ultrahigh value of 47.3 dB at 1545.3 nm. Moreover, the influence of changing the structural parameters on the bistable behaviors is discussed in detail, showing that the structure can tolerate structural parametric deviation to some extent. The proposed bistable structure with ultra-compact size, low thresholds, high extinction ratio, and ultrafast response time could be of great applications for fabricating high-performance all-optical-communication devices.