1 January 2022 in Mehanization and electrification of agricultural
1 January 2023 in Mechanics and automatics of agroindustrial production
Purpose. To determine the degree (magnitude) of grain damage at different stages of post-harvest grain processing and develop a rapid method for assessing grain damage using any technical means employed in the post-harvest grain processing line. Methods. The analytical research method is based on analyzing the degree of grain damage caused by technical means in the technological lines of post-harvest grain processing. Results. It has been established that the technical means used in technological lines result in different degrees of grain damage, and an analytical dependency has been obtained to determine the percentage of grain damage for each technological tool used in the technological chain of grain processing. Through experimental studies, a dependence of grain damage on the number of passes of grain material has been obtained, based on which an empirical relationship has been established in the first approximation, which expresses the dependence of grain material damage on the number of its passes. Conclusions. The proposed evaluation system allows for a quick assessment of the most significant damage caused by technical means in the grain cleaning line without excluding it from the technological process or disconnecting it from the power supply, taking into account the changing nature of the input grain damage. Keywords: grain damage, technological lines, cleaning of grain material, analytical method, noria, grain cleaning machine.
1 January 2024 in Mechanics and automatics of agroindustrial production
IUINSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
INSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE
Purpose. To investigate the process of drying corn seeds on the cob in a vacuum dryer using experimental methods. Methods. The research was carried out using the basic principles of thermodynamics of drying thermolabile materials, mathematical statistics, simulation modeling using a computer and mathematical software environments MathCad, Matlab, Statistika, Microsoft Office Excel. Results. A special device for a vacuum drum dryer for drying corn on the cob was developed. A regression equation for the exposure of corn grain drying on the cob was obtained, which is described as a polynomial of the 3rd degree. The graphical dependences of the exposure of drying corn on the cob on the heating temperature at a vacuum inside the drying chamber of 80 kPa were constructed. The changes in laboratory germination of corn seeds on the temperature of grain heating after vacuum drying of corn grain on the cob were obtained. Conclusions. According to the results of experimental researches of the process of drying breeding corn seeds in a vacuum drum dryer, it was found that the rational value of the heating temperature of corn grain on the cob at a vacuum inside the drying chamber of 80 kPa is at the level of 31–32 °C, while the value of the drying exposure is 13.5 hours with a change in the laboratory germination of corn seeds at the level of 0.75 %. Keywords: dryer, vacuum, drying exposure, corn cob, corn seeds, grain temperature, cob temperature, speed.
2 November 2025 in Mechanics and automatics of agroindustrial production
Purpose. Ensuring minimization of seed residue in the seed chamber of the “Selena” seeder during multi-belt sowing of small-seeded vegetable crops. Methods. The research was carried out using the methods of structural modeling and design, mathematical statistics and analytical processing of experimental data. Results. A technical solution was developed to improve the seeding devices of the pneumatic vegetable seeder of precision sowing “Selena” in order to ensure complete, residue-free seeding of small- seeded vegetable crops in the hopper during multi-belt sowing. The design of the seeder was finalized and changes were made to the prototype, its bench tests were conducted, and a positive result was obtained. According to the test results, three seeding sections of the “Selena” seeder were re-equipped. Production tests of the “Selena” seeder with modified seeding devices were carried out at the State Enterprise “Subsidiary Farm of the SBU” of the Fastiv district of the Kyiv region. It was confirmed that the full sowing of expensive seeds of table carrots and table beets with the recommended sowing accuracy and distribution of plants in a row in the field was ensured. Conclusions. The results of experimental and production tests confirmed that the proposed technical solution for the modernization of seeding devices ensures the minimization of seed residues in the additional seed chamber of the seeding devices of the “Selena” pneumatic vegetable seeder during multi- tape sowing of expensive hybrid seeds of small-seeded vegetable crops. Keywords: small-seeded vegetable crops, precision sowing, Selena seeder, seeding devices, modernization, additional seed chamber, setting complete emptying of the chamber.