This article is about the study and characterization of a monolithically integrated dual-gate bidirectional switch (BDS) realized in a CMOS-compatible gallium nitride (GaN) pilot line. The switch is based on a p-GaN gate enhancement-mode (E-mode) high-electron-mobility transistor (HEMT) rated for 650 V and provides a symmetrical electrical operation in positive and negative bias conditions while achieving comparable performance to the traditional HEMT and, with respect to the implementation of conventional BDSs, the overall on-resistance is sensibly lower. Several layout variations are discussed both through the electrical measurements and technology CAD (TCAD) simulations, together with comparisons with the reference HEMT, providing valuable insights into the design optimization of dual-gate BDSs.
23 October 2025 in IEEE Transactions on Electron Devices
In this article, we present dual-gate bidirectional switches (BDSs) rated for 1200-V operation in both positive and negative biases, fabricated on 200-mm GaN-on-QST1 engineered substrates. The switches are p-GaN gate enhancement-mode (E-mode) high-electron-mobility transistors (HEMTs) that can conduct the current and block the voltage in both directions (drain to source or source to drain). The switches are fabricated with different design variations in the channel length and field-plates (FPs) configuration and are tested in all four conduction modes (on-state, forward and reverse diode modes, and off-state). In addition, a hard breakdown of the device well above the rated voltage is demonstrated, along with initial reliability tests that demonstrate promising performance of the devices.