An X-ray parabolic refractive axicon, as novel type of beam-shaping optical element, consisting of a refractive lens with a form of the surface represented as a parabolic cone, is proposed and demonstrated. Under coherent X-ray illumination, the axicon generates Bessel-like beam along the optical axis and ring-shaped beam at the imaging distance. A theoretical analysis of the beams formation by the axicons was carried out and corresponding computer simulations were performed. The proposed parabolic axicon was experimentally tested at ID06 ESRF beamline in the X-ray energy range from 10 to 15 keV. Experimentally recorded images of shaped beams are in a good agreement with computer calculations. Future possible applications of the axicon are discussed.
An X-ray amplitude-splitting interferometer based on compound refractive lenses, which operates in the reflection mode, is proposed and realized. The idea of a reflecto-interferometer is to use a very simplified experimental setup where a focused X-ray beam reflected from parallel flat surfaces creates an interference pattern in a wide angular range. The functional capabilities of the interferometer were experimentally tested at the European Synchrotron Radiation Facility (ESRF) ID06 beamline in the X-ray energy range from 10 keV to 15 keV. The main features of the proposed approach, high spatial and temporal resolution, were demonstrated experimentally. The reflections from free-standing Si3N4 membranes, gold and resist layers were studied. Experimentally recorded interferograms are in good agreement with our simulations. The main advantages and future possible applications of the reflecto-interferometer are discussed.
The optical system consisting of X-ray refractive axicon lenses and traditional parabolic lenses is considered. Such lenses combination makes it possible to flexibly adjust the size of the focused ring-shaped beam produced by axicons changing their number in the optical system. It was theoretically shown that the considered lens system is analogous to the X-ray refractive parabolic axicon. The axicons were made from polycrystalline aluminum by a pressing technique. The optical properties of the presented beam-shaping lens have been experimentally tested at the European Synchrotron Radiation Facility (ESRF). The obtained results are fully consistent with theoretical calculations. Additionally, the numerical experiment was carried out to demonstrate the influence of the axial symmetry of the optical scheme as a whole and axicons conical shape distortion on the focused annular beam. Future possible applications of the axicon are discussed.