Geopolymer, as a new type of solid waste-based inorganic cementitious material, exhibits outstanding behavior in terms of physical and chemical performance, macromechanical properties, long-lasting stability, and features potential application development tendency in the field of repair and reinforcement of existing concrete structures. This paper investigated the interfacial behavior of geopolymer mortar with OPC concrete substrate under different slag, fly ash and red mud mixing proportions, while cement mortar was used as a control group for the research. The interfacial bonding properties of the geopolymer mortar to the OPC concrete substrate were elaborated by carrying out split tensile test, double-sided shear test, and three-point bending test. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were employed to further analyze the microstructural characteristics and physical phase components of the interfacial transition zone between the geopolymer mortar and the OPC concrete substrate. The results indicated that the compressive strength of slag-fly ash-red mud-based geopolymer mortar under different mixing ratio conditions was consistently superior to that of cement mortar, where the optimum mixing ratio for the geopolymer mortar was S33F33R33. Overall, the interfacial bonding properties of the geopolymer mortar to the OPC concrete substrate gradually increased with the increment of the slag content, however, an evolutionary trend of minor enhancement followed by a gradual reduction was observed with the growth of the fly ash and red mud content.
Geopolymer, as a new type of solid waste-based inorganic cementitious material, exhibits outstanding Behavior in terms of physical and chemical performance, macro-mechanical properties and long-lasting stability, and features potential application development tendency in the field of repair and reinforcement of existing concrete structures. This paper investigates the interfacial Behavior of geopolymer mortar with OPC concrete substrate under different slag, fly ash and red mud mixing proportions, while cement mortar was used as a control group for the research. The interfacial bonding properties of the geopolymer mortar to the OPC concrete substrate were elaborated by carrying out split tensile test, two-sided shear test and three-point bending test. The scanning electron microscopy (SEM) and X-ray diffraction (XRD) were employed to further analyse the microstructural characteristics and physical phase components of the interfacial transition zone between the geopolymer mortar and the OPC concrete substrate. The results indicated that the compressive strength of slag-fly ash-red mud-based geopolymer mortar under different mixing ratio conditions was consistently superior to that of cement mortar. Overall, the interfacial bonding properties of the geopolymer mortar to the OPC concrete substrate gradually increased with the increment of the slag content, however, an evolutionary trend of minor enhancement followed by a gradual reduction was observed with the growth of the fly ash and red mud content.
PS-InSAR provides spatially distributed line-of-sight (LOS) deformation measurements, creating an opportunity to forecast dam-surface deformation as a spatial field rather than at isolated monitoring points. However, irregular acquisition intervals, sparse observations, and anisotropic radar pixels complicate multi-step forecasting. We develop SimVP-RD, an observation-integrity- and geometry-aware framework that predicts reference-interval increments, scales them by the actual elapsed time, and integrates them from the latest observed field. The framework combines fixed-support masking, a reconstruction-dynamics objective, native-grid anisotropic convolution, and recursive rollout training. Using 94 real acquisitions of Lianghekou Dam, SimVP-RD achieves an MAE of 3.355 ± 0.024 mm and an RMSE of 4.534 ± 0.034 mm under a matched observed-only 8→8 recursive protocol, outperforming ConvLSTM, PredRNN, and TAU. The corrected Stage-A ablation further shows that the reconstruction-dynamics objective reduces MAE from 3.833 ± 0.111 to 3.549 ± 0.086 mm. On the native PS grid, the 3 × 7 convolution retains all 2170 valid locations and provides a more balanced physical receptive field than the conventional 3 × 3 kernel. Spatial and interval-stratified diagnostics further characterize how forecast errors vary across prediction leads and spatial contexts. These results establish SimVP-RD as a support-preserving approach to multi-step LOS deformation-field forecasting under irregular satellite sampling.