8 September 2022 in ACS Photonics
24 March 2023 in 2D Materials
Layered materials (LMs) produced by liquid phase exfoliation (LPE) can be used as building blocks for optoelectronic applications. However, when compared with mechanically exfoliated flakes, or films prepared by chemical vapor deposition (CVD), LPE-based printed optoelectronic devices are limited by mobility, defects and trap states. Here, we present a scalable fabrication technique combining CVD with LPE LMs to overcome such limitations. We use black phosphorus inks, inkjet-printed on graphene on Si/SiO2, patterned by inkjet printing based lithography, and source and drain electrodes printed with an Ag ink, to prepare photodetectors (PDs). These have an external responsivity (R ext)∼337 A W−1 at 488 nm, and operate from visible (∼488 nm) to short-wave infrared (∼2.7 µm, R 48 mA W−1). We also use this approach to fabricate flexible PDs on polyester fabric, one of the most common used in textiles, achieving R 6 mA W−1 at 488 nm for an operating voltage of 1 V. Thus, our combination of scalable CVD and LPE techniques via inkjet printing is promising for wearable and flexible applications.
16 March 2022 in Physical Review B
Optical communications, imaging, and biomedicine require efficient detection of infrared radiation. Growing demand pushes for the integration of such detectors on chips. It is a challenge for conventional semiconductor devices to meet these specs due to spectral limitations arising from their finite band gap, as well as material incompatibilities. Single layer graphene (SLG) is compatible with complementary metal-oxide-semiconductor (CMOS) Si technology, while its broadband (UV to THz) absorption makes the SLG/Si junction a promising platform for photodetection. Here we model the thermionic operation of SLG/Si Schottky photodetectors, considering SLG's absorption, heat capacity, and carrier cooling dependence on temperature and carrier density. We self-consistently solve coupled rate equations involving electronic and lattice temperatures, and nonequilibrium carrier density under light illumination. We use as an example the infrared photon energy of 0.4 eV, below the threshold for direct photoemission over the Schottky barrier, to study the photothermionic response as a function of voltage bias, input power, pulse width, electronic injection, and relaxation rates. We find that device and operation parameters can be optimized to reach responsivities competitive with the state of the art for any light frequency, unlike conventional semiconductor-based devices. Our results prove that the SLG/Si junction is a broadband photodetection platform.
1 April 2015 in Review of Scientific Instruments
We present SIMION 8.1 Monte Carlo type simulations of the response function and detection solid angle for long lived Auger states (lifetime τ ∼ 10−9 − 10−5 s) recorded by a hemispherical spectrograph with injection lens and position sensitive detector used for high resolution Auger spectroscopy of ion beams. Also included in these simulations for the first time are kinematic effects particular to Auger emission from fast moving projectile ions such as line broadening and solid angle limitations allowing for a more accurate and realistic line shape modeling. Our results are found to be in excellent agreement with measured electron line shapes of both long lived 1s2s2p4P and prompt Auger projectile states formed by electron capture in collisions of 25.3 MeV F7+ with H2 and 12.0 MeV C4+ with Ne recorded at 0∘ to the beam direction. These results are important for the accurate evaluation of the 1s2s2p 4P/2P ratio of K-Auger cross sections whose observed non-statistical production by electron capture into He-like ions, recently a field of interesting interpretations, awaits further resolution.
2 July 2018 in Applied Physics Letters
APAndreas Papagiannopoulos
Deep and fast electro-optic modulation is critical for high-speed near infrared signal processing. We combine the electro-absorption tunability of graphene with the high-Q resonance of a Bragg-based Fabry-Perot resonator at λ = 1550 nm and show that ∼100% free-space signal modulation at small insertion loss and GHz speed can always be achieved independently of graphene quality (mobility), provided that the device operates in the reflection mode and is tuned in critical coupling with graphene. Remarkably, the critical coupling mechanism produces a higher extinction ratio for lower graphene mobility. We use practical considerations to optimize the device architecture and operation as a function of graphene mobility. With a small modification, this scheme can be turned into a very sensitive acousto-absorption modulator with an extinction ratio of ∼30 dB/ or an index sensor with a sensitivity of . These designs can be extended throughout the IR spectrum by appropriate material selection and scaling of layer dimensions.
1 December 2015 in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms