Gabriel Giribaldi

Gabriel Giribaldi

Auto-generated profile, based on publicly available information

Gabriel Giribaldi

Institute for NanoSystems Innovation (NanoSI) Northeastern University Boston Massachusetts USA

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2024 in Nature Communications
Verified
Journal Article
Open access
PDF file
GGGabriel Giribaldi
Gabriel Giribaldi
LCLuca Colombo
Luca Colombo
PSPietro Simeoni
Pietro Simeoni
MRMatteo Rinaldi
Matteo Rinaldi
Over recent years, the surge in mobile communication has deepened global connectivity. With escalating demands for faster data rates, the push for higher carrier frequencies intensifies. The 7–20 GHz range, located between the 5G sub-6 GHz and the mm-wave spectra, provides an excellent trade-off between network capacity and coverage, and constitutes a yet-to-be-explored range for 5G and 6G applications. This work proposes a technological platform able to deliver CMOS-compatible, on-chip multi-frequency, low-loss, wide-band, and compact filters for cellular radios operating in this range by leveraging the micro-to-nano scaling of acoustic electromechanical resonators. The results showcase the first-ever demonstrated low insertion loss bank of 7 nanoacoustic passband filters in the X-band. Most of the filters showcase fractional bandwidths above 3% and sub-dB loss per stage in an extremely compact form factor, enabling the manufacturing of filters and duplexers for the next generation of mobile handsets operating in the X-band and beyond.

7 September 2023 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Open access
GGGabriel Giribaldi
Gabriel Giribaldi
LCLuca Colombo
Luca Colombo
MRMatteo Rinaldi
Matteo Rinaldi
This paper reports on 30% Scandium-doped Aluminum Nitride (ScAlN) Lateral Field-Excited (LFE) Cross-sectional Lame’ Mode Resonators (CLMRs) with unprecedented performance in the 6-20 GHz range. By combining high-crystallinity 30% ScAlN piezoelectric thin-films, a lithographic tunability of the resonance frequency, and a simple 3-mask post-CMOS compatible fabrication process, we propose a technology platform that can enable the mass-production of low-loss, wide-band, and compact microacoustic filtering devices spanning a wide spectrum portion on the same chip for the next-generation RF front-ends of handsets. The present work demonstrates a successful scaling of the microacoustic technology well beyond the sub-6 GHz 5G band, as well as the outstanding capabilities of high-crystallinity 30% ScAlN piezoelectric layers in delivering high-quality factor ( Q ) and high-electromechanical coupling ( k t 2 ) resonators, notably exceeding the state-of-the-art in terms of relevant figures of merit. Furthermore, we experimentally investigate the impact of geometrical parameters such as tethering configuration and width-over-length ratio on the devices’ 3dB quality factor ( Q 3dB ), power linearity, and Temperature Coefficient of Frequency (TCF). By adopting a statistical approach for data analysis, we determine the optimal geometry to maximize the Q . Moreover, we experimentally demonstrate that a fully tethered device’s configuration ensures superior power linearity, lower TCF, and higher device yield, and select that as best design trade-off between all the variables under consideration. Finally, we discuss a further scaling of LFE CLMRs, both in terms of higher doping levels in the piezoelectric layer, in order to enhance the performance of microacoustic filters, and in terms of higher operation frequencies, in order to reach and cover the mm-waves spectrum.

13 February 2025 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
LCLuca Colombo
Luca Colombo
LSLuca Spagnuolo
Luca Spagnuolo
KSKapil Saha
Kapil Saha
GGGabriel Giribaldi
Gabriel Giribaldi
PSPietro Simeoni
Pietro Simeoni
MRMatteo Rinaldi
Matteo Rinaldi
This letter reports on Solidly-Mounted Bidimensional Mode Resonators (S2MRs) exploiting a highly-optimized Sezawa mode in 30% Scandium-doped Aluminum Nitride (ScAlN) on Silicon Carbide (SiC) and operating near 16 GHz. Experimental results demonstrate mechanical quality factors ( ${Q}_{m}$ ) as high as 380, Bode quality factors ( ${Q}_{\textit {Bode}}$ ) approaching 500, electromechanical coupling coefficients ( ${k}_{t}^{{2}}$ ) of 4.5%, an overall Figure of Merit ( $\textit {FOM} = {Q}_{m} \cdot {k}_{t}^{{2}}$ ) exceeding 17, and power handling greater than 20 dBm for devices closely matched to $50~\Omega $ . To the best of the authors’ knowledge, S2MRs exhibit the highest Key Performance Indicators (KPIs) among solidly mounted resonators in the Ku-band, paving the way for the integration of nanoacoustic devices on fast substrates with high-power electronics, tailored for military and harsh-environment applications.

21 November 2022 in IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Open access
BHBernard Herrera
Bernard Herrera
PSPietro Simeoni
Pietro Simeoni
GGGabriel Giribaldi
Gabriel Giribaldi
LCLuca Colombo
Luca Colombo
MRMatteo Rinaldi
Matteo Rinaldi
The present work reports on the novel usage of Scandium-doped Aluminum Nitride (AlScN) PMUT arrays for enhanced power transfer in implantable applications. Optimization considerations were explored for the PMUT array towards high performance. The transmission metric, compared to identical arrays based on Aluminum Nitride (AlN), showed a 25dB increase. Power transfer measurements also confirmed a considerable increase as compared to previous work based on AlN. Different matching strategies were explored to maximize the output power including inductor conjugate matching and matching utilizing resonators in series and parallel topologies. A full characterization of the transferred power versus incident acoustic intensity on the array revealed transmission of power levels of several milliwatts for intensities below the Food and Drug Administration’s (FDA) limit. The performance of the array, as compared with other implementations with a range of frequencies, dimensions and input acoustic intensities was bench-marked through the use of the conversion efficiency as the figure-of-merit. The practical applicability of the system, utilizing a realistic tissue phantom as the medium, was proven by interfacing with a commercially available boost converter to obtain a rectified voltage and power levels sufficient for powering and charging intra-body electronics.

9 January 2022
Verified
Conference Paper
Closed access
BHBernard Herrera
Bernard Herrera
GGGabriel Giribaldi
Gabriel Giribaldi
MPMichele Pirro
Michele Pirro
LCLuca Colombo
Luca Colombo
MRMatteo Rinaldi
Matteo Rinaldi
The present work reports on the novel usage of Scandium-doped Aluminum Nitride (AlScN) PMUT arrays for enhanced power transfer in implantable applications. As compared to identical arrays based on Aluminum Nitride (AlN), a 25dB increase in transmission was observed, and output power was increased by a factor of 50 as compared to previous work based on AlN arrays. After conjugate matching of the source impedance of the array, the output power showed a further 14x increase. Characterization of the transferred power versus incident acoustic intensity on the array enabled transmission of power levels of several milliwatts for intensities below the Food and Drug Administration's (FDA) limit. Finally, the array was interfaced to a commercially available boost converter to obtain rectified voltages of 1.8V and 1V in water and tissue phantom media, respectively, thus proving its practical applicability for powering and charging of intra-body electronics.

15 February 2023 in Research Square
Verified
Preprint
Open access
PDF file
GGGabriel Giribaldi
Gabriel Giribaldi
LCLuca Colombo
Luca Colombo
PSPietro Simeoni
Pietro Simeoni
MRMatteo Rinaldi
Matteo Rinaldi
The last half a century has seen an enormous growth in mobile communication, reflecting into an increasingly interconnected world. Nevertheless, the incessant demand for faster data-rates requires a shift to higher carrier frequencies, which translates to the need for more ubiquitous hardware due to the increased wave propagation losses. The 7-20 GHz range, located between the sub-6 GHz (5G FR-1) and the mm-wave (5G FR-2) spectrum, provides an excellent trade-off between network capacity and coverage. Such spectrum portion constitutes a yet-to-explore third frequency range (FR-3) for future 5G applications, and is foreseen to become the 6G mid-band, devoted to crowded urban area coverage. This work proposes a technological platform able to deliver CMOS-compatible, on-chip multi-frequency low-loss, wideband, and compact passband filters for cellular radios operating at mid-band frequencies, exploiting the micro-to-nano scaling of acoustic electromechanical resonators and filters. The presented results showcase the first-ever demonstrated low insertion loss bank of 7 nanoacoustic passive passband filters in the X-band, spanning more than 3 GHz of operation, all fabricated on the same substrate with state-of-the-art and low-complexity micro-machining process. Most of the filters showcase fractional bandwidths above 3% and sub-dB loss per stage, all in an extremely compact form factor, enabling the manufacturing of X-band filters and duplexers that can be integrated in mobile handsets at each antenna element. The novelty of the current results stems from the adoption of a high-crystallinity piezoelectric Sc-doped AlN thin film, together with an optimized resonator topology in terms of design and fabrication.