4 August 2020 in IEEE Transactions on Power Delivery
Direct current circuit breakers (DCCBs) have become a large research topic and are considered one of the critical components for future DC grids. Proposed DCCB concepts may be grouped into hybrid DCCBs and active resonant DCCBs. In this work, the enhanced active resonant (EAR) DCCB family is introduced. EAR DCCBs combine elements of hybrid and active resonant DCCBs. The EAR DCCB family consists of one unidirectional and six bidirectional concepts. All concepts feature proactive commutation. The main characteristic of the EAR DCCBs is that discharge closing switches are used instead of semiconductors with turn-off capability. Relevant discharge closing switch technology is reviewed, a laboratory prototype is explained, and experimental results are presented to demonstrate the feasibility of the proposed DCCB concepts.
25 May 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Enhanced active resonant (EAR) dc circuit breakers (DCCBs) are a promising set of recently proposed DCCB concepts. As other DCCBs, EAR DCCBs still require a fast mechanical switch. The requirements on the actuator of the mechanical switch depend on the DCCB concept and the dc grid and are derived here for an EAR DCCB. Thomson-coil actuators (TCAs) can open and close mechanical switches sufficiently fast to satisfy the requirements. This work studies experimentally a TCA system with active damping for an off-the-shelf industrial vacuum interrupter used as mechanical switch in an EAR DCCB. The prototype is explained in detail, and extensive measurement results are presented, showing that active damping must be perfectly timed to be effective. A novel Thomson-coil (TC) driver is proposed and studied experimentally, which operates the TCA more efficiently by recycling energy during the actuation. Moreover, the novel TC driver reduces the capacitive storage by 50% and allows for faster recharging with lower charging current. Finally, the autoreclosing and proactive commutation operation of the TCA system and the interruption capability of the prototype EAR DCCB are demonstrated experimentally.
6 April 2022 in IEEE Access
The wireless control of modular multilevel converter (MMC) submodules was recently proposed. The success of the control depends on specialized control methods suitable for wireless communication and a properly designed wireless communication network in theMMCvalve hall while aiming for low latency and high reliability. The wireless communication in the hall can be affected by the electromagnetic interference (EMI) of MMC submodules, voltage and current transients. In this article, firstly, a wireless communication network based on 5G New Radio is designed for an example full-scale MMC valve hall. After that, radiated EMI characteristics of MMC submodules with different voltage and current ratings and two dc circuit breakers are measured. The effects of EMI on wireless communication in the multi-GHz frequency band are tested. The interference from the components is confined below 500MHz, and the wireless communication with 5825MHz center frequency is not affected by the interference.
7 December 2021 in IEEE Transactions on Power Electronics
Enhanced active resonant (EAR) dc circuit breakers (DCCBs) are a novel type of DCCB that use a discharge closing switch as interruption medium. A technical limitation of discharge closing switches is the minimum voltage across the main gap required for successful triggering. A novel commutation process creating the minimum voltage internally is proposed, which allows to simplify the EAR DCCB configuration and to reduce its component count. In the prototype, the discharge closing switch is implemented with a TVG. Experiments show that the TVG can be triggered reliably down to a voltage of 50 $\mathrm{V}$ and that the discharge in the TVG is highly oscillatory at low current. The originally proposed EAR DCCB configuration has to be tuned such that the commutation to the TVG succeeds at low current. Conversely, the novel commutation process decouples the minimum voltage from the current level by adjusting the triggering delay. This allows reliable commutation irrespective of the operating conditions. It is shown that the novel commutation process does not adversely affect dc interruption. Proactive commutation operation and auto-reclosing strategies are demonstrated.