15 September 2020 in IEEE Sensors Journal
Dissolved gas analysis (DGA) is an important online monitoring technique for power transformers. When there are some faults in oil-immersed transformers, insulation materials will decompose into various small-molecule gases and continually dissolve in transformer oil. In order to figure out the composition and the concentration of dissolved gases, an optical gas sensing system based on photonic crystal fiber was developed. Hollow core photonic crystal fiber (HC-PCF) used in the system played the role of an absorption gas cell. The gas diffusion time was studied theoretically and experimentally, and the result showed that by using a 1.0 m length long HC-PCF, the theoretical diffusion time for acetylene was about 3.47 hours. Various acetylene gas samples got detected. Through Allan variance analysis, the sensitivity of the proposed sensing system could reach the best with the highest signal-to-noise ratio (SNR) when the average time was 29 s, and a minimum detection limit of 4.5 ppm could be achieved. The proposed sensing system showed tremendous advantages, such as low detection limit, no cross interference, high sensitivity. This gas sensing technique has a good application prospect in DGA for power transformers.
14 May 2021 in IEEE Transactions on Instrumentation and Measurement
Gas detection plays an important role in many fields, such as atmospheric environment monitoring, biological monitoring, gas leakage monitoring, gas decomposition products detection, and so on. Nowadays, there are many kinds of gas sensors. Compared with normal gas sensors, optical sensors have the advantages of antielectromagnetic interference, high sensitivity, and compact size. Especially in certain extreme conditions, such as in aerospace applications and oil exploration application, optical fiber sensors are more attractive. This article presents a critical review on fiber loop ring-down spectroscopy (FLRDS), which can be used for quantitative detection of concentrations of trace gases. Fiber cavity is the core component of FLRDS system. The principles, loss characteristics, and application ranges of different types of fiber cavities are discussed. This article brings a variety of FLRDS techniques and introduces the basis for each technique, recent developments in methods, and performance limitations in detail. Finally, the existing technical barriers and future prospects of the FLRDS system for gas sensing are presented.