Weiqi Qin

Dr. Weiqi Qin

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2023 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
WQWeiqi Qin
Weiqi Qin
GMGuo-Ming Ma
Guo-Ming Ma
JHJing Hu
Jing Hu
TGTengjun Guo
Tengjun Guo
SWSihan Wang
Sihan Wang
YWYuan Wang
Yuan Wang
Distributed detection and acoustic emission (AE) waveform retrieval of partial discharge (PD) in power cable joints are significant but challenging tasks. In this paper, we proposed a cable joint PD detection method based on optical fiber distributed acoustic sensing (DAS). Ordinary single-mode optical fiber (SMF) was wound on the outer semiconductive layer to obtain sufficient sensitivity. Coherent optical time domain reflection (COTDR) principle was utilized to detect the phase variation and locate the PDs. The AE waveforms were retrieved by Fourier integration and difference operation. The experimental results indicated that the sensing system had the ability of multi-point monitoring. The PD AE waveforms caused by conductor spike and insulation air gap defects were accurately retrieved.

21 February 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WQWeiqi Qin
Weiqi Qin
GMGuo-Ming Ma
Guo-Ming Ma
SWSihan Wang
Sihan Wang
JHJing Hu
Jing Hu
TGTengjun Guo
Tengjun Guo
RSRongbin Shi
Rongbin Shi
Optical fiber distributed acoustic sensing (DAS) is a potential approach to realize on-line monitoring and rapid localization of power cable partial discharges. Distributed detection of discharges requires a DAS system with a wide frequency band and low noise level. For this purpose, an improved coherent optical time-domain reflectometry (COTDR) method based on dual-frequency probe pulses was developed. The method doubled the length-bandwidth product (LBP) of traditional DAS systems without significantly increasing the complexity of signal demodulation. A discharge signal extraction algorithm was also proposed based on the detection results of the dual-frequency pulses to exclude the effects of fading noises and vibrations. The improved COTDR system demonstrated the frequency band extension by detecting and recovering the 50 kHz sinusoidal vibration. The sensing distance was 1.1 km and the spatial resolution was 7.15 m. Afterwards, the multi-point weak spark discharge acoustic signals were correctly measured and localized, and the frequency components up to 71.36 kHz were detected. The proposed COTDR method provides a prospective solution of distributed partial discharge detection for power cables.

28 August 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
GMGuo-Ming Ma
Guo-Ming Ma
HZHongyang Zhou
Hongyang Zhou
YLYa-Bo Li
Ya-Bo Li
HZHanchi Zhang
Hanchi Zhang
WQWeiqi Qin
Weiqi Qin
CYChao Yan
Chao Yan
The temperature distribution on gas-insulated line (GIL) spacer affect surface charge accumulation. But the spacer temperature distribution is hard to measure because the conventional electric sensors are large dimensions, hard to multiplex, and sensitive to electromagnetic interference (EMI). In this paper, a distributed temperature measurement system of GIL spacer based on the optical frequency domain reflectometry (OFDR) was developed to solve the problems. In the system, ultra-weak fiber Bragg grating (FBG) was adopted to replace single mode fiber due to its higher signal noise ratio. The demodulation method was described for compensating the nonlinear frequency tuning errors induced by the unstable tunable laser. In addition, the relationship between the spacer temperature and the wavelength shift was determined in the calibration experiment. Moreover, the temperature distribution on a 126 kV GIL spacer was measured by the proposed OFDR system. The data processing method for 3D surface temperature on cone-type spacer was also introduced. High resolution temperature distribution on the spacer surface was successfully obtained using OFDR system, which is unable to be accomplished with the conventional electric temperature sensor.

29 August 2025 in High Voltage
Verified
Journal Article
Open access
Xianhao FanXianhao Fan
Xianhao Fan
WQWeiqi Qin
Weiqi Qin
RQRui Qiu
Rui Qiu
YZYiming Zang
Yiming Zang
WLWu Lu
Wu Lu
JHJinliang He
Jinliang He
Partial discharge (PD) detection is considered one of the most crucial and effective methods for identifying defects in electrical equipment. Consequently, investigating advanced and efficient PD monitoring techniques is essential for the development of gas‐insulated equipment (GIE) and the construction of ultra‐high‐voltage (UHV) networks. This paper first explores the causes and impact characteristics of various defects in GIE based on experimental results and simulation analysis. It then reviews current research on advanced PD measurement techniques, integrating acoustic, chemical and optical methods. The findings preliminarily demonstrate the unique advantages and applicability of the advanced methods for complex detection environments. Finally, this paper addresses the technical challenges and potential breakthroughs associated with these detection techniques. In this regard, this study aims to provide technical insights and research directions for defect detection techniques in UHV GIE.

12 January 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
TGTing-Yu Gao
Ting-Yu Gao
GMGuo-Ming Ma
Guo-Ming Ma
YWYu-Kun Wang
Yu-Kun Wang
DGDan Gao
Dan Gao
WQWeiqi Qin
Weiqi Qin
CYChao Yan
Chao Yan
Magnetic field sensor based on non-adiabatic tapered optical fiber (NATOF) surrounded with magnetic fluid (MF) has a potential to detect ultra-weak magnetic field. In order to improve the sensitivity of the magnetic field sensor, this paper investigated the effect of structure on sensitivity. The interference occurring between the modes in cladding and MF was analyzed to obtain the relationship between sensitivity and diameter of the tapered waist. Experiments were carried out to verify the proposed relationship. The experiments indicated when the diameter was larger than dispersion turning point ( $8.75 ~\mu \text{m}$ ), the sensitivity of the sensor decreased with the diameter of the tapered waist. The largest sensitivity obtained in the experiment is 6.567 nm/mT under a weak magnetic flux density range from 0 mT to 5 mT. This result is instructive for the manufacture of sensors with specific sensitivity.

15 September 2020 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YWYuan Wang
Yuan Wang
GMGuo-Ming Ma
Guo-Ming Ma
DZDiya Zheng
Diya Zheng
WLWenlin Liao
Wenlin Liao
JJJun Jiang
Jun Jiang
WQWeiqi Qin
Weiqi Qin
Dissolved gas analysis (DGA) is an important online monitoring technique for power transformers. When there are some faults in oil-immersed transformers, insulation materials will decompose into various small-molecule gases and continually dissolve in transformer oil. In order to figure out the composition and the concentration of dissolved gases, an optical gas sensing system based on photonic crystal fiber was developed. Hollow core photonic crystal fiber (HC-PCF) used in the system played the role of an absorption gas cell. The gas diffusion time was studied theoretically and experimentally, and the result showed that by using a 1.0 m length long HC-PCF, the theoretical diffusion time for acetylene was about 3.47 hours. Various acetylene gas samples got detected. Through Allan variance analysis, the sensitivity of the proposed sensing system could reach the best with the highest signal-to-noise ratio (SNR) when the average time was 29 s, and a minimum detection limit of 4.5 ppm could be achieved. The proposed sensing system showed tremendous advantages, such as low detection limit, no cross interference, high sensitivity. This gas sensing technique has a good application prospect in DGA for power transformers.