1 December 2016 in Applied Surface Science
12 March 2020 in Semiconductor Science and Technology
In this paper, a fabrication technique of Si 0.5 Ge 0.5 Fin for the high mobility channel FinFET device is systematically investigated. Although the shallow trench isolation (STI) densification temperature is already reduced from 1050 °C to 850 °C, the Si 0.5 Ge 0.5 Fin with the STI annealing first approach still suffers from thermal instability and micro trench issue. It is no possible to further reduce the STI densification temperature using the traditional furnace annealing for the Si 0.5 Ge 0.5 Fin, because the STI densification process of 750 °C also faces the same issue with an unacceptable STI wet etching rate. Thus, a spike annealing of 1050 °C is employed to maintain Si 0.5 Ge 0.5 Fin stability and render the STI etching rate acceptable. The spike annealing treated Si 0.5 Ge 0.5 Fin maintains a better profile than the furnace annealing sample, but it still faces the micro trench issue after the STI recess. This is because the Si 0.5 Ge 0.5 Fin is already oxidized and SiGeO
x
has a higher etching rate than STI oxide. Finally, a novel STI recess first process with an extra SiN capping is developed to solve both the thermal instability and the micro trench issue, and a minor Si 0.5 Ge 0.5 Fin loss with sharp Si 0.7 Ge 0.3 SRB/Si 0.5 Ge 0.5 interfaces for the STI last scheme is realized by utilizing this novel STI recess first process.
29 October 2019 in Semiconductor Science and Technology
The process optimization of the Si 0.7 Ge 0.3 Fin formation for the shallow trench isolation first strategy is systematically demonstrated in this paper. The optimized Si Fin etching and recess process are firstly developed to attain an improvement of side wall roughness and profile for the Si 0.7 Ge 0.3 selective epitaxial growth. Moreover, a new developed photoresist etching back process, inserted between Tetramethylammonium hydroxide etching and Si 0.7 Ge 0.3 selective epitaxial growth, is employed to eliminate the surface defects completely. Furthermore, an optimized pre-baking temperature of Si 0.7 Ge 0.3 selective epitaxial growth results in a more rounding V-shaped Si recess profile compared with its V-shaped profile produced by the Tetramethylammonium hydroxide etching. The incoming profile optimization is critical to achieve the structural defects free for the Si 0.7 Ge 0.3 layer selective epitaxial growth. Finally, a high crystalline quality of the Si 0.7 Ge 0.3 Fin formation inside narrow trench is realized by utilizing the SiGe chemical mechanical polishing and Shallow Trench Isolation recess process. This work presents a good technique for high-mobility pMOSFETs in future technology node.
1 September 2017 in Chinese Physics B
The growth process of GeO x films formed by plasma post-oxidation (PPO) at room temperature (RT) is investigated using angle-resolved x-ray photoelectron spectroscopy (AR-XPS). The experimental results show that the distributions of the Ge4+ states, a mixture of the Ge2+ and Ge3+ states, and the Ge+1 states are localized from the GeO x surface to the GeO x /Ge interface. Moreover, the Ge+1 states are predominant when the two outermost layers of Ge atoms are oxidized. These findings are helpful for establishing in-depth knowledge of the growth mechanism of the GeO x layer and valuable for the optimization of Ge-based gate stacks for future complementary metal–oxide–semiconductor (MOS) field-effect transistor (CMOSFET) devices.