14 August 2017 in IEEE Transactions on Electron Devices
A hybrid fin/planar lateral double-diffused MOSFET (LDMOS) design (hybrid FET) is proposed for the high-voltage input-output devices in a FinFETbased system-on-chip (SoC) technology. 3-D technology computer-aided design simulations show that a planar drift region and a planar drain region are advantageous for higher breakdown voltage (BV) to specific on-state resistance (R on_sp ) ratio (BV 2 /R on_sp ). By slightly extending the planar portion of the semiconductor active region into the gated channel region, the theoretical limit of BV 2 /R on_sp for LDMOS can be surpassed. Hybrid FETs can be fabricated using a process flow that is compatible with the state-of-art FinFET SoC technology.
3 November 2017 in IEEE Journal of the Electron Devices Society
Interstitial trapping by oxygen-inserted silicon channel results in blocking of boron and phosphorus transient enhanced diffusion as well as retention of channel boron profiles during the gate oxidation process. The enhanced doping profile control capability is applicable to punch-through stop of advanced CMOS devices and its benefits to 28nm planar CMOS and 20nm bulk FinFET devices projected by TCAD are discussed.
6 March 2019 in IEEE Transactions on Electron Devices
A scheme for precisely adjusting the drive strength of an inserted-oxide FinFET (iFinFET) comprising two nanowire (NW) channel regions that are separated by a thin oxide layer, to enhance the manufacturing yield of a minimally sized six-transistor static random access memory (6T-SRAM) cell, is investigated in this paper. The 3-D process simulations show that the upper NW channel region can be selectively rendered nonconducting by dopant ion implantation followed by thermal annealing so that its threshold voltage is greater than the supply voltage (VDD). Furthermore, the position of the inserted-oxide layer can be adjusted to balance the tradeoff between the read stability and write-ability to achieve the lowest minimum cell operating voltage (Vmin). Using a compact transistor model calibrated to 3-D device simulations, doped iFinFET technology is projected to enable Vmin of a minimally sized 6T-SRAM cell to be substantially lower than VDD, eliminating the need for write-assist circuitry and lowering power consumption.
14 July 2013 in Proceedings of the AAAI Conference on Artificial Intelligence
Norvig’s (1992) Paradigms of AI Programming is an important book for learning about AI programming. However, the book uses Common Lisp as the programming language, which is less popular now than in 1992. Thus, we have translated many classical AI programs described in the book into Python, a more commonly used language. We have also documented the programs and offered them as a resource in a course on knowledge-based AI.
28 September 2018 in IEEE Journal of the Electron Devices Society
Oxygen-Inserted (OI) layers are shown to shield a buried boron profile from oxidation enhanced diffusion. A TCAD model for the OI layer, including point defect and dopant trapping, as implemented in Sentaurus Process is shown to match experimental results, demonstrating the retention of steeper boron profiles after oxidation. Incorporation of the oxygen insertion layers into a CMOS process increases on-current and reduces threshold variability and mismatch.