20 April 2024 in Advanced Materials Technologies
X‐ray multilayer optics play a vital role in synchrotron optics due to their ability to generate constructive interference. These devices typically consist of several tens to hundreds of periods of alternating layers coated on a substrate. In contrast to single‐layer mirrors that reflect X‐rays within a specific energy range, multilayer optics can be tailored to achieve a high reflection over a broad energy spectrum. This is a sought‐after property for many beamlines and has led to the development of numerous new X‐ray applications and capabilities. This review highlights advances in multilayer optics, including fabrication techniques, layer structure design, material choice, and strategies to enhance performance. This is placed in the context of recent applications of such multilayers as monochromator and gratings, focusing devices, and polarizers. Current challenges and the future outlook within this field are also proposed. This comprehensive summary of a rapidly advancing field highlights recent achievements and is intended to promote practical applications in terms of the use of multilayer synchrotron optics.
18 June 2025 in Composites Part B: Engineering
9 August 2024 in Journal of Synchrotron Radiation
A state-of-the-art multilayer deposition system with a 4200 mm-long linear substrate translator housed within an ultra-high vacuum chamber has been developed. This instrument is engineered to produce single and multilayer coatings, accommodating mirrors up to 2000 mm in length through the utilization of eight rectangular cathodes. To ensure the quality and reliability of the coatings, the system incorporates various diagnostic tools for in situ thickness uniformity and stress measurement. Furthermore, the system features an annealing process capable of heating up to 700°C within the load-lock chamber. The entire operation, including pump down, deposition and venting processes, is automated through user-friendly software. In addition, all essential log data, power of sputtering source, working pressure and motion positions are automatically stored for comprehensive data analysis. Preliminary commissioning results demonstrate excellent lateral film thickness uniformity, achieving 0.26% along the translation direction over 1500 mm in dynamic mode. The multilayer deposition system is poised for use in fabricating periodic, lateral-graded and depth-graded multilayers, specifically catering to the beamlines for diverse scientific applications at Diamond Light Source.
7 August 2025 in Optics Express
Multilayer (ML) monochromators are essential components in synchrotron radiation facilities, widely used for X-ray imaging and X-ray diffraction, as well as select X-ray spectroscopy techniques. However, ML monochromators introduce stripe artefacts to the reflected beam, which degrade the quality of the X-ray images. These stripe artefacts originate from figure errors on the monochromator’s surface, which are challenging to minimise for most manufacturers. In this study, we demonstrate stripe-free imaging from ultra-high-quality ML monochromators. We employed a state-of-the-art ion beam figuring (IBF) technique to produce multilayer substrates with a cutting-edge slope error of less than 30 nrad root mean squared (rms). These substrates were coated in an advanced multilayer deposition system, enabling the production of uniform multilayer coatings. The performance of the ML monochromators was tested at the B16 test beamline at the diamond light source. Speckle-based metrology was used to verify the theoretical link between wavefront curvature and the appearance of stripe artefacts. We obtained stripe-free X-ray images from the newly fabricated ML monochromators in both single-bounce and double-bounce configurations, with excellent image clarity and flat field uniformity. This represents a breakthrough in the production of ML monochromators.
7 August 2025 in Advanced Optical Materials
Multilayer monochromators are crucial optical elements for monochromatizing intense X‐ray beams in applications demanding high photon flux with moderate energy resolution. Achieving high‐performance multilayer monochromators requires optimizing multilayer parameters, using high‐quality substrates, and precisely controlling the deposition process to ensure high reflectivity and eliminate stripe artifacts. This paper presents the design and development, and characterization of double multilayer monochromators (DMM). These coatings are deposited using an optimized mask design to ensure <0.3% sagittal thickness uniformity and employing reactive sputtering in nitrogen gas (N 2 ) ‐ to enhance multilayer reflectivity. A high reflectivity of 88.7% at 14.0 keV and 85.6% at 22.4 keV is achieved. Furthermore, stripe‐free imaging is achieved in double‐reflection geometry via the use of high‐quality substrates produced using the in‐house ion beam figuring machine. These findings offer valuable insights for developing high‐performance DMMs, paving the way for the next generation of synchrotron optics and instruments.
4 August 2026 in Advanced Materials Technologies
The precise exploitation and efficient control of residual stresses are crucial for the development of high‐performance thin‐film optics. Multi‐beam optical sensors (MOS) have been widely used for in situ residual stress measurements; however, this only provides information on the average residual stress at a single position. To overcome this limitation, speckle‐based curvature optical metrology (SCOM) has been implemented at the multilayer deposition system (MDS) at Diamond Light Source. SCOM delivers two‐dimensional curvature mapping, which has enabled direct visualization of the variation of spatial residual stress and substrate deformation for the first time. Benchmarking of SCOM measurements against MOS reveals excellent agreement in the extracted curvature for a deformable mirror. Importantly, SCOM offers a significantly larger dynamic range, allowing accurate measurements under the extreme curvature conditions that are frequently encountered in thick, high‐residual stress films. This approach was also used to evaluate the residual stress evolution of a range of important materials, including Mo, Si and WSi 2 , which have been systematically investigated across varying deposition thicknesses and working pressures.