20 August 2020 in Journal of Materials Chemistry C
SRSinclair Ryley Ratnasingham
Sinclair Ryley Ratnasingham
+3
We reveal the complex interplay between photoactive layer thickness and illumination intensity in perovskite solar cells, presenting design criteria for real-world and solar concentrator applications.
11 December 2021 in Advanced Materials
Formamidinium lead triiodide (FAPbI3) is attractive for photovoltaic devices due to its optimal bandgap at around 1.45 eV and improved thermal stability compared with methylammonium‐based perovskites. Crystallization of phase‐pure α‐FAPbI3 conventionally requires high‐temperature thermal annealing at 150 °C whilst the obtained α‐FAPbI3 is metastable at room temperature. Here, aerosol‐assisted crystallization (AAC) is reported, which converts yellow δ‐FAPbI3 into black α‐FAPbI3 at only 100 °C using precursor solutions containing only lead iodide and formamidinium iodide with no chemical additives. The obtained α‐FAPbI3 exhibits remarkably enhanced stability compared to the 150 °C annealed counterparts, in combination with improvements in film crystallinity and photoluminescence yield. Using X‐ray diffraction, X‐ray scattering, and density functional theory simulation, it is identified that relaxation of residual tensile strains, achieved through the lower annealing temperature and post‐crystallization crystal growth during AAC, is the key factor that facilitates the formation of phase‐stable α‐FAPbI3. This overcomes the strain‐induced lattice expansion that is known to cause the metastability of α‐FAPbI3. Accordingly, pure FAPbI3 p–i–n solar cells are reported, facilitated by the low‐temperature (≤100 °C) AAC processing, which demonstrates increases of both power conversion efficiency and operational stability compared to devices fabricated using 150 °C annealed films.
12 November 2021 in Advanced Materials
The charge carrier dynamics in organic solar cells and organic–inorganic hybrid metal halide perovskite solar cells, two leading technologies in thin‐film photovoltaics, are compared. The similarities and differences in charge generation, charge separation, charge transport, charge collection, and charge recombination in these two technologies are discussed, linking these back to the intrinsic material properties of organic and perovskite semiconductors, and how these factors impact on photovoltaic device performance is elucidated. In particular, the impact of exciton binding energy, charge transfer states, bimolecular recombination, charge carrier transport, sub‐bandgap tail states, and surface recombination is evaluated, and the lessons learned from transient optical and optoelectronic measurements are discussed. This perspective thus highlights the key factors limiting device performance and rationalizes similarities and differences in design requirements between organic and perovskite solar cells.
29 January 2019 in Journal of Materials Chemistry A
This study addresses the cause of enhanced stability of methyl ammonium lead iodide when processed with aminovaleric acid additives (AVA-MAPbI3) in screen printed, hole transport layer free perovskite solar cells with carbon top electrodes (c-PSC). Employing AVA as an additive in the active layer caused a 40-fold increase in device lifetime measured under full sun illumination in ambient air (RH ∼ 15%). This stability improvement with AVA was also observed in optical photobleaching studies of planar films on glass, indicating this improvement is intrinsic to the perovskite film. Employing low-energy ion scattering spectroscopy, photoluminescence studies as a function of AVA and oxygen exposure, and a molecular probe for superoxide generation, we conclude that even though superoxide is generated in both AVA-MAPbI3 and MAPbI3 films, AVA located at grain boundaries is able to passivate surface defect sites, resulting in enhanced resistivity to oxygen induced degradation. These results are discussed in terms of their implications for the design of environmentally stable perovskite solar cells.
17 March 2017 in Journal of Materials Chemistry A
Degradation analysis of CH3NH3Pb(I1−xBrx)3 mixed halide perovskites, showing promising environmental stability of CH3NH3PbBr3.
19 July 2019 in Journal of Materials Chemistry A
Doping is a widely implemented strategy for enhancing the inherent electronic properties of charge transport layers in photovoltaic (PV) devices. Here, in direct contrast to existing understanding, we find that a reduction in p-doping of the organic hole transport layer (HTL) leads to substantial improvements in PV performance in planar p–i–n perovskite solar cells (PSCs), driven by improvements in open circuit voltage (VOC). Employing a range of transient and steady state characterisation tools, we find that the improvements of VOC correlate with reduced surface recombination losses in less p-doped HTLs. A simple device model including screening of bulk electric fields in the perovskite layer is used to explain this observation. In particular, photoluminescence (PL) emission of complete solar cells shows that efficient performance is correlated to a high PL intensity at open circuit and a low PL intensity at short circuit. We conclude that desirable transport layers for p–i–n PSCs should be charge selective contacts with low doping densities.