7 February 2025 in IEEE Transactions on Mobile Computing
Indoor mmWave-based sensing technologies have garnered substantial interest from both the industrial and academic. Yet, the intrinsic challenge posed by the limited Field-of-View (FOV) of mmWave radars significantly restricts their coverage. This limitation necessitates careful selection of installation positions and orientations to optimize performance, thereby severely curtailing the versatility and widespread adoption of these systems. Traditionally, expanding coverage involved increasing the number of radar units. This paper introduces a novel approach to enhance the FOV by incorporating mobility, achieved by affixing the radar onto a pan-tilt unit capable of rotating along both the horizontal and azimuthal. Nevertheless, the disparity between the pan-tilt and the radar presents significant challenges for accurately rotating the radar's orientation. To mitigate this, we propose an automated calibration algorithm for radar and pan-tilt, ensuring precise calibration. Additionally, we have devised a radar orientation adjustment algorithm intended to automatically align the radar's FOV with the positions of detected objects to facilitate various applications. Through three case studies, we have demonstrated that mmRotation can greatly expand the sensing range, enabling support for multiple applications on a single radar, such as vital signs monitoring and fall detection. Comprehensive experimental results underscore that our system surpasses the current state-of-the-art (SOTA).
3 September 2025 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Couples sharing a bed is a common practice in households, making sleep monitoring in multi-person scenarios a significant area of research. The high sensitivity of mmWave makes it a promising tool for monitoring vital signs during sleep. However, implementing mmWave-based solutions for such settings poses two major challenges. First, the range and angular resolution of commercial mmWave radar are still inadequate for handling such close-proximity scenarios where individuals share the same bed. Second, even with sufficient angular resolution, aligning the main lobe with one target usually faces strong interference from other targets located in the sidelobes. To address these challenges, we leverage antenna pattern nulls---directions with zero gain---to mitigate interference and overcome resolution limitations. Implementing null steering on practical mmWave radar, however, is challenging due to the human body being an extended target that spans a range of angles, as well as hardware imperfections that render traditional algorithms ineffective. In this paper, we present mmNull, the first null steering system designed for commercial mmWave radars. mmNull models the human body as an extended target rather than a single point, derives a closed-form solution to maximize target gain while suppressing interferences, and employs a heuristic algorithm to address hardware imperfections. Comprehensive experiments show that mmNull achieves a more than 5x improvement in accuracy compared to current state-of-the-art (SOTA) methods for monitoring respiration rate, heart rate, and heart rate variability (HRV) in multi-person scenarios.
30 September 2026 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Millimeter-wave (mmWave) radar has been widely studied for ubiquitous human sensing, but its deployment in homes remains limited by the need for additional power, connectivity, and dedicated hardware. A formative user study with 236 participants suggests that integrating sensing capabilities into existing home appliances may offer a more acceptable deployment model: although many participants were reluctant to install standalone sensors, 92% expressed willingness to use appliance-integrated sensing services. Motivated by this finding, we present mmUbiSense, a system that integrates low-cost commercial radar chips into everyday appliances. This integration, however, exposes the radar to mechanical vibrations generated during appliance operation, which can substantially distort both micro-motion signals and macro-motion point clouds. Existing compensation methods typically rely on high-end radar hardware and are therefore difficult to apply under the cost constraints of appliance integration. mmUbiSense addresses the two sensing regimes separately through a physics-guided framework. For micro-motion sensing, we develop a spectral-matching estimator that models the interaction between appliance vibration and physiological motion in the complex radar signal, allowing respiration and heart rates to be recovered without relying on fine spatial resolution. For macro-motion sensing, we introduce a spatio-temporal clustering method that distinguishes vibration-induced ghost points from human motion by comparing Doppler responses with actual spatial displacement. We evaluate mmUbiSense on air conditioners, washing machines, and range hoods across vital sign monitoring, pose estimation, fall detection, and gesture recognition tasks. The results show consistent improvements over the corresponding baselines in the evaluated settings, supporting the feasibility of integrating reliable mmWave sensing into everyday household appliances using low-cost hardware.
30 September 2026 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Continuous, fine-grained cardiac monitoring during sleep is vital for cardiovascular health. Emerging as a promising alternative to cumbersome wearables, mmWave radar offers a contactless, privacy-preserving modality capable of capturing minute skin vibrations. However, transitioning mmWave radar from labs to real-world bedrooms remains challenging. Our rigorous empirical evaluation of state-of-the-art systems reveals a severe reliability gap: valid Inter-Beat Intervals (IBI) are captured for only 24%-42% of the night within an error threshold of 50 ms. Since clinical HRV analysis requires millisecond-level precision (e.g., RMSSD changes), such coarse and intermittent tracking renders existing methods medically insufficient. We attribute this failure to two fundamental hurdles: (i) instability driven by overwhelming respiratory interference and postural diversity, and (ii) signal entanglement in co-sleeping scenarios where angular separation defies hardware resolution. To bridge this gap, we present DuBCG. First, to tackle instability, we introduce a Head-Facing configuration to capture the Radar Ballistocardiogram (R-BCG). By leveraging the body's longitudinal recoil, this approach achieves orthogonal respiratory suppression and posture-invariant robustness. Second, to resolve entanglement, we propose the Multi-point Scattering Spatial Selectivity Model, theoretically proving that signal separability is achievable beyond physical resolution limits. Extensive real-world benchmarks demonstrate that DuBCG achieves a median IBI error of 8.4 ms—an 8× improvement over existing methods. This precision bridges the gap from existing intermittent monitoring to long-term, clinically comparable continuous HRV assessment.