Conventional planar coils in an asymmetric structure cannot provide stable mutual inductance over a wide range. To address this issue, a novel asymmetric flat cross -shaped solenoid magnetic coupler (FCSMC) with high lateral misalignment tolerance for a multiple-receiver wireless power transfer (WPT) system is proposed in this article, which can achieve freer charging positions for multiple automated guided vehicles (AGVs) at a single wireless charging station. Moreover, the analytical model of FCSMC is analyzed to simplify the design process based on the air-core mutual inductance equations. Then, a general design process is proposed for larger-scale FCSMC, which greatly reduces the workload of finite-element analysis (FEA) simulations. Finally, a 200/400 W prototype is built to verify the validity of the system within a $\pm$ 90-mm misalignment. In single-receiver cases with a 10 mm air gap, the comparisons with conventional planar square coils show that FCSMC's (planner square coils') output power fluctuates within 5% (27%) with maximum efficiency of 88.55% (92.01%), indicating that FCSMC sacrifices about 3% efficiency for 22% improvement in power stability. At the highest $\pm$ 90-mm misalignments, the output power fluctuates within 1% (19%), improving about 18%. In multiple-receiver cases for FCSMC, the charging positions are free with maximum efficiency of 87.96% when the shortest distance between ferrites of receivers is 20 mm or more.
27 January 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
The gradual rise of home micro-grid can improve the reliability of low voltage distribution system effectively. However, when system goes down, the separate islanding operation model of micro-grid can’t make full use of distributed resources. Division of home micro-grid group will solve this problem. This paper proposes a classification index of micro-grid group—the islanding probability. Then, an optimal partition model of the home micro-grids group is built based on this index. At the mean time, the way to solve this mode is given. The simulation results show that the division can further improve the reliability of the system, and an ideal effect can be achieved just by using fewer division switch.