Minji Bang

Minji Bang

Auto-generated profile, based on publicly available information

Minji Bang

Department of Electrical Engineering, Gyeongsang National University (GNU), Jinju-si, Republic of Korea

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
MSMinki Suh
Minki Suh
MRMinsang Ryu
Minsang Ryu
JHJonghyeon Ha
Jonghyeon Ha
MBMinji Bang
Minji Bang
DLDabok Lee
Dabok Lee
JKJungsik Kim
Jungsik Kim
In this study, we investigate a novel design for a saddle-fin-based dynamic random access memory (s-fin DRAM) aimed at mitigating the Rowhammer (RH) effect. This work involves modifying the doping scheme and employing technology computer-aided design (TCAD) simulations. We propose two distinct doping schemes to counteract the RH effect within adjacent memory cells: local substrate implant (LSI) and adjusting the depth of the storage node (SN). For s-fin DRAM with LSI, we introduce an additional implant into the substrate region adjacent to the shallow trench isolation (STI) near the end of the passing gate (PG). This additional implant creates a higher conduction band energy (CBE) area, thereby reducing the electron density drawn from the SN due to the strong electric field when the PG is activated. The simulation results demonstrate that this LSI approach mitigates the RH effect by 62.7% and slightly improves the retention time, primarily owing to the lowered gate work function. A significant improvement in RH tolerance up to 2.3 times greater than that for conventional s-fin DRAM is observed for s-fin DRAM with SN depth modification. This enhancement is attributed to the increased depth of the SN, which reduces the inversion area caused by PG activation, with the depletion area closely situated near the SN junction. Furthermore, we combine LSI approach with the s-fin DRAM design featuring an increased SN depth. The findings reveal that the designed s-fin DRAM exhibits up to 3.4 times greater RH tolerance than its conventional counterpart.

7 November 2023 in IEEE Access
Verified
Journal Article
Open access
JHJonghyeon Ha
Jonghyeon Ha
SKSunjin Kim
Sunjin Kim
MBMinji Bang
Minji Bang
GLGyeongyeop Lee
Gyeongyeop Lee
MSMinki Suh
Minki Suh
JKJungsik Kim
Jungsik Kim
Due to the aggressive scaling down of logic semiconductors, the difficulty of semiconductor component processes has increased. As the structure of components becomes more complex, the time and cost of processes and simulations have risen. Machine learning is now being used to analyze the electrical characteristics data of semiconductor components and apply the trained machine learning to next-generation semiconductor development. Machine learning trained on process data and simulation results can quickly and accurately predict which electrical characteristics change significantly when the component’s structure changes and which parameters have a significant impact on the electrical characteristic changes. This paper presents suitable machine learning models for analyzing and predicting the electrical characteristics (on-current ( Ion ), off-current ( Ioff ), threshold voltage ( Vth ), subthreshold swing (SS), and drain induced barrier lowering (DIBL)) and statistical distribution (mean and standard deviation of the electrical characteristics) resulting from geometrical variability (sheet thickness ( Twire ), sheet diameter ( Dwire ), oxide thickness ( Tox ), gate length ( Lg ), spacer length ( Lsp ), gate metal work-function (WF)) in nanosheet field-effect transistor (NSFET), which are a next-generation logic device. Machine learning models, including regulation-based models (Ridge, LASSO) and tree-based models (decision tree (DT), random forest (RF), extreme gradient boost (XGBoost), and light gradient boost machine (LGBM)), are trained on technology computer-aided design (TCAD) simulation data. The LGBM more accurately predicts the electrical characteristics and statistical distribution of the NSFET than the other models. Additionally, we analyze the effect of geometrical variability on the NSFET based on feature importance.

16 October 2024 in IEEE Access
Verified
Journal Article
Open access
MSMinki Suh
Minki Suh
MRMinsang Ryu
Minsang Ryu
JHJonghyeon Ha
Jonghyeon Ha
MBMinji Bang
Minji Bang
DLDabok Lee
Dabok Lee
JKJungsik Kim
Jungsik Kim
This study investigates the row hammer tolerance and potential degradation by capacitive crosstalk (CC) and parasitic bipolar junction transistor (BJT) effect in vertically stacked dynamic random-access memory (VS-DRAM) using technology computer-aided design (TCAD) simulations. The close arrangement of word lines in VS-DRAM results in a subthreshold leakage by the CC effect. Furthermore, as VS-DRAM has a floating body, hole accumulation in the body occurs via gate-induced drain leakage (GIDL) at the storage node in the cell that stores ‘1’. This can be accelerated by activating the bit line (BL). This causes leakage current ( IBJT ) by the parasitic BJT when the BL state becomes low and it is found that IBJT can be enhanced by the CC effect in this study. The row hammer effect and IBJT by the CC and parasitic BJT effects can be mitigated by reducing Si width.

11 September 2024 in IEEE Access
Verified
Journal Article
Open access
MBMinji Bang
Minji Bang
JHJonghyeon Ha
Jonghyeon Ha
MSMinki Suh
Minki Suh
DLDabok Lee
Dabok Lee
MRMinsang Ryu
Minsang Ryu
JKJungsik Kim
Jungsik Kim
The effects of single event upset (SEU) by alpha particles and heavy ions on the data flip of a 3 nm technology node gate-all-around (GAA) nanosheet field-effect transistor (NSFET) 6T static random access memory (SRAM) cell was studied through technology computer-aided design (TCAD) simulations. It was found that the sensitivity to radiation in the “off” pull-down transistor varies depending on the position of the alpha particle and heavy ions in the incident. The most significant radiation-induced increase in electron density occurs at the drain–channel junction. Heavy ion strikes lead to the lowest threshold linear energy transfer ( LETth ) value during the hold operation compared to read and write operations. The partial bottom dielectric isolation (PDI) scheme demonstrates lower radiation sensitivity than the conventional scheme, as the PDI layer acts as a physical barrier preventing charge migration from the substrate to the drain.

4 September 2023 in IEEE Access
Verified
Journal Article
Open access
JHJonghyeon Ha
Jonghyeon Ha
MBMinji Bang
Minji Bang
GLGyeongyeop Lee
Gyeongyeop Lee
MSMinki Suh
Minki Suh
CKChong-Eun Kim
Chong-Eun Kim
JKJungsik Kim
Jungsik Kim
In this work, the effect of displacement defect (DD) owing to cosmic rays on six-transistor (6T) static random access memory (SRAM) with a 3 nm node nanosheet field-effect transistor (NSFET) is investigated using technology computer-aided design (TCAD) simulation. In order to comprehensively study the uncertainty of the radiation of NSFET 6T SRAM, the shape of the DD cluster cross-section and the transistor damaged by the DD in 6T SRAM are considered. Read static noise margin (RSNM) degradation (19 %) is the highest when the rectangular cross-section of the DD cluster (rectangular-DD cluster) is located in the pull-down1 (PD1) transistor. To mitigate the rectangular-DD cluster damage, we studied the variation in the DD cluster influence on the sheet shape and the source/drain (S/D) overlap length fluctuation. The sheet shape resulted in 2.3 % lower RSNM degradation in NS compared with nanowire (NW). Under the worst conditions (PD1 transistor damaged rectangular-DD cluster, NW structure), the S/D underlap structure showed 3.7 % lower RSNM degradation than the S/D overlap structure.

9 September 2025 in IEEE Access
Verified
Journal Article
Open access
JHJonghyeon Ha
Jonghyeon Ha
MBMinji Bang
Minji Bang
MSMinki Suh
Minki Suh
DLDabok Lee
Dabok Lee
MRMinsang Ryu
Minsang Ryu
JKJungsik Kim
Jungsik Kim
This study investigates the total ionizing dose (TID) effect on the six-transistor static random access memory (6-T SRAM) consisting of a novel device, a nanosheet field effect transistor (NSFET). Via technology computer-aided design, we simulate the hold, read, and write static noise margin (HSNM, RSNM, and WSNM) degradations by the oxide trap, using stationary simulation. In the stationary simulation, the HSNM and RSNM decrease about 75% and bit flip occurs under the oxide trap conditions, respectively. The voltage stored at the $V_{CH}$ ( $V_{CL}$ ) node reduces owing to the leakage current of the pull-down (PD) transistors. The detail degradation mechanism for the SRAM operation (hold/read/write) problems due to the oxide trap is confirmed through the time-dependent simulations. In the read operations, the leakage current at PD transistors causes a bit flip of the CH node. Moreover, the CH node voltage decreases under hold and write operations ( $\Delta V_{CH} =15.7$ % and 14%). Significantly, when the adjacent cell (word-line (WL)2) of the target cell (WL1) operates to write data ( $V_{BL}$ down from $V_{DD}$ to 0), the voltage drop at the target cell (WL1) CH node (decreased by 23.3%) is enhanced under hold operation of the target cell. To mitigate the effects of oxide trap that cause electrical characteristic degradation in NSFET 6-T SRAM, we applied a partial dielectric isolation (PDI) structure that locally deposits an oxide (SiO2) on the bottom of the source/drain (S/D). SRAM cells incorporating the proposed PDI technique demonstrated that variations in SNM caused by oxide trap were suppressed to less than 1% across read, write, and hold operations. Additionally, through time-dependent electrical characteristic analysis, it was confirmed that the potential changes in $V_{ch}$ and $V_{cl}$ converge 1% under various operation modes and adjacent cell activation conditions, thereby demonstrating the effective blocking of the effects of oxide trap occurring in the shallow trench isolation (STI) region.