Ubiquitous power Internet of Things (IoT) is suffering unprecedented constraints and reliable tracing is a typical example. Motivated by software defined and function virtualization capabilities of edge-cloud interplay, we propose a smart collaborative tracking scheme by investigating advanced parameter prediction skills and improved particle filter approaches. First, the range-based positioning issues are transformed into the vector nonlinear suboptimal estimation problem based on information fusion. Second, the importance density function is provisioned to calculate locations and trajectories of the mobile node by obtaining cubature points, updating state estimation, and revising vector estimation. The Gauss-Newton iterative method has been utilized to achieve higher accuracy. Third, we implement our scheme into simulation platform and prototype system. The practical deployment has been validated from multiple perspectives. Comparing with existing candidates, experimental results illustrate that the proposed algorithm is able to enhance the performance and demonstrate acceptable reliability. Potential usages are being expected in dynamic surveillance, equipment maintenance, and other emerging IoT scenarios.
In the industrial Internet of things (IIoT), there is always a strong demand for real-time information transfer. Especially when deploying wireless/wired hybrid networks in smart factories, the requirement for low delay interaction is more prominent. Although tree routing protocols have been successfully executed in simple networks, more challenges in transmission speed can be observed in the manufacturing broadband communication system. Motivated by the progresses in deep learning, a smart collaborative routing protocol with low delay and high reliability is proposed to accommodate mixed link scenarios. First, we establish a one-hop delay model to investigate the potential affects of Media Access Control (MAC) layer parameters, which supports the subsequent design. Second, forwarding, maintenance, and efficiency strategies are created to construct the basic functionalities for our routing protocol. Relevant procedures and key approaches are highlighted as well. Third, two sub-protocols are generated and the corresponding implementation steps are described. The experimental results demonstrate that the end-to-end delay can be effectively cut down through comprehensive improvements. Even more sensor nodes and larger network scale are involved, our proposed protocol can still illustrate the advantages comparing with existing solutions within IIoT.
The high-temperature pressure sensors have wide applications in aerospace, petroleum, geothermal exploration, automotive electronics and other fields. However, the traditional silicon pressure sensors are restricted to pressure measurement under 120 °C and cannot be satisfied to measure the pressure of various gases or liquids in high temperature and other harsh environments. This paper proposes a novel high temperature pressure sensor based on graphene, in which a rectangular cavity is applied to improve the piezoresistive characteristics of the sensor. The unique of this sensor is that the graphene is coated by the silicon nitride (Si 3 N 4 ) membrane, which could avoid the oxidation of graphene in high-temperature and increase the temperature tolerance range. The sensor was placed at various temperatures (50-420 °C) to explore the temperature characteristics, achieving a maximal temperature coefficient of resistance (TCR) of 0.322% °C -1 . Moreover, the sensor with a 64×9 μm 2 cavity has a high pressure sensitivity of 5.32×10 -4 kPa -1 , enabling a wide range from 100 kPa to 10 Pa. Experimental results indicate that the proposed sensor possesses superior pressure sensitivity, a wide pressure detection range and high-temperature tolerance of 420 °C, which provides new insight into fabricating high-temperature pressure sensors based on graphene and creates more applications in different fields.
The flexible pressure sensors enable their extensive utilization across a wide range of domains, encompassing wearable electronic devices, human-machine interface, electronic skin, and intelligent medical treatment. In recent years, the rapid advancements in technologies such as the Internet of things and artificial intelligence, coupled with growing functional requirements, have given rise to a flourishing research domain focused on high-performance flexible pressure sensors. Theoretical models, structural design, and process preparation have continuously advanced flexible pressure sensors based on traditional materials. However, these advancements still fall short of meeting the demand for high quality, high sensitivity, and extensive measurement capabilities. Meanwhile, the excellent mechanical and electrical properties of two-dimensional (2D) materials make them the best candidate material for the next generation of pressure sensors. However, the advancement of flexible pressure sensors is currently constrained by factors such as the challenge posed by mechanical crosstalk in extensive arrays, the impact of environmental variables on achieving optimal performance, and the intricate task of decoupling multiple signals. This paper reviews the current status and applications of flexible pressure sensors in recent years. And puts forward some current challenges, which provides a valuable guide for future developments in this field. This review shed light on the future of flexible pressure sensors.
14 October 2021 in Journal of Lightwave Technology
A room-temperature broadband (visible to near infrared spectrum) photodetector based on single wall carbon nanotubes (SWCNTs) and graphene heterojunction was fabricated in this work, by drop-casting the SWCNTs suspension onto the graphene field-effect transistor with the buried-gate electrode. A high photoresponsivity of 109 A/W and a fast photoresponse speed of 2.9 ms were obtained within the visible region based on the photogating effect. This high gain mechanism leads to a high photoconductive gain (9.1 × 10 6 ). In addition, the photodetector exhibits a photoresponsivity of 51.5 A/W at 940 nm, indicating a wide spectrum detection capability. Moreover, a higher photoresponsivity can be obtained by tuning the source-drain and gate bias voltages. This approach provides an easy and feasible way to achieve broadband heterojunction photodetectors with high-performance.
As the key element, sensor networks are widely investigated by the Internet of Things (IoT) community. When massive numbers of devices are well connected, malicious attackers may deliberately propagate fake position information to confuse the ordinary users and lower the network survivability in belt-type situation. However, most existing positioning solutions only focus on the algorithm accuracy and do not consider any security aspects. In this paper, we propose a comprehensive scheme for node localization protection, which aims to improve the energy-efficient, reliability and accuracy. To handle the unbalanced resource consumption, a node deployment mechanism is presented to satisfy the energy balancing strategy in resource-constrained scenarios. According to cooperation localization theory and network connection property, the parameter estimation model is established. To achieve reliable estimations and eliminate large errors, an improved localization algorithm is created based on modified average hop distances. In order to further improve the algorithms, the node positioning accuracy is enhanced by using the steepest descent method. The experimental simulations illustrate the performance of new scheme can meet the previous targets. The results also demonstrate that it improves the belt-type sensor networks’ survivability, in terms of anti-interference, network energy saving, etc.