31 July 2026 in Journal of Applied Polymer Science
1 September 2026 in Engineering Research Express
This study investigates the fabrication and characterization of polyvinylpyrrolidone (PVP) and 45S5 bioactive glass (BG) composite nanofibers produced via electrospinning for treating dentine sensitivity and enhancing enamel remineralization. Initially, processing parameters were optimized using a 4% PVP solution. Subsequently, various concentrations of 45S5 BG (2 and 4%) were incorporated into PVP matrices of different ratios (2, 4, and 8%). The nanofibers were characterized using scanning electron microscopy (SEM), EDX, FTIR, TGA, and DTA. SEM results revealed a significant inverse correlation between fiber diameter and bead density. Optimized parameters (17 kV and 50 µ l min −1 ) yielded bead-free, homogeneous nanofibers with diameters ranging from 335 to 460 nm, ideal for deep dentin tubule penetration. FTIR spectra confirmed that all nanofibers retained their chemical integrity without anomalous vibrations. Consequently, these 45S5-added PVP nanocomposite fibers offer a promising and biocompatible solution for the treatment of microcracks and dental sensitivity.
15 September 2025 in Journal of the Turkish Chemical Society Section B: Chemical Engineering
In this study, the potential of using activated carbon (NSAC) obtained from nut shell as an adsorbent as a cost-effective and environmentally friendly material for removing Reactive Yellow 3 (RY3) dye from synthetic aqueous solutions by adsorption was evaluated. In producing nut shell-based activated carbon, a chemical activation method was used and NaOH was selected as the chemical agent. After chemical pretreatment, it was subjected to a carbonization process at 600 °C. The obtained activated carbon was analyzed using FTIR, SEM, and pHzpc techniques. Adsorption experiments were carried out under varying adsorption conditions. The effect of adsorption parameters was evaluated. The parameters and their ranges whose effects were evaluated in the study were; contact time (0-180 min), pH (4-11), temperature (298-328 K), dye concentration (25-100 mg/L), and adsorbent dose (10-45 mg/L). The best removal efficiency, 90.83%, and adsorption capacity of 272.5 mg/g were obtained at 328 K, pH 7.0, dye concentration of 75 mg/L, and adsorbent dose of 25 mg/L. The adsorption kinetics were found to be in good agreement with the pseudo-second-order model expressed as chemisorption. Langmuir isotherm analysis confirmed monolayer adsorption. These findings suggest that NSAC produced from agricultural wastes can be a sustainable alternative adsorbent in wastewater treatment applications.