The efficiency of the adiabatic demagnetization of the nuclear spin system (NSS) of a solid is limited, if quadrupole effects are present. Nevertheless, despite a considerable quadrupole interaction, recent experiments validated the thermodynamic description of the NSS in GaAs. This suggests that nuclear spin temperature can be used as a probe of nuclear magnetic resonances. We implement this idea by analyzing the modification of the NSS temperature in response to an oscillating magnetic field at various frequencies, an approach termed as the warm-up spectroscopy. It is tested in a -GaAs sample where both mechanical strain and built-in electric field may contribute to the quadrupole splitting, yielding the parameters of electric field gradient tensors for and both Ga isotopes, and .
We report on InGaAs/GaAs quantum dot injection microdisk lasers laterally connected with a bus waveguide fabricated by planar technology from the same epi-structure. Various coupling schemes of microlaser with waveguide are studied including a microlaser attached to a waveguide (zero gap), a 100 nm gap for evanescence light outcoupling, and with a waveguide surrounding the resonator. The modes outcoupling and microlaser's loss (Q-factor) are analyzed by simulation of the lasers. A strong decrease in the number of the microdisk resonance lines associated with an increase in loss in the resonator due to the coupling with waveguide is observed in modeling and experimentally. We study the spectral and lasing parameters of the microdisk lasers, as well as characteristics of the outcoupled emission, and demonstrate efficient light outcoupling for 30 and 40 μm diameter continuous wave operating microdisk laser up to 96 °C.
1 December 2021 in Journal of Physics: Conference Series
We studied the output optical power of microdisk lasers with InGaAs/GaAs quantum dots active region. An increase in the number of layers in the active region in the waveguide from 2 to 6 leads to increase in the peak output optical power due probably to increase of the gain. We also observe a corresponding increase of the threshold current due to the increase on the transparence current. The maximal optical power is achieved for structure with 6 layers at approximately 60 mA injection current. Further increase of the number of the QD layers to 10 results in increase of the threshold current and sudden drop of the output power.