Cristian Cappellini

Dr. Cristian Cappellini

Free University of Bozen-Bolzano, Bolzano, Trentino-Alto Adige, Italy
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2022 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Cristian CappelliniCristian Cappellini
Cristian Cappellini
AAAndrea Abeni
Andrea Abeni
This paper concerns the tool wear in hard turning of AISI 52100 hardened steel by means of PCBN tools. The purposes of this work are the development of a tool wear model and its implementation in a FEM-based procedure for predicting crater and flank wear progression during machining operations for studying the influence of tool wear on the process in terms of tool geometry modifications and stress variation on the tool. The developed tool wear model, able to update the geometry of the worn tool as a function of the wear rate, has been implemented in the utilized Deform 2D FEM software. This new analytical model differs from the already proposed methods of existing research, since it concerns both crater and flank wear evaluation. The validation of the model has been achieved by the comparison between experimental and simulated wear parameters. For doing this, an extended experimental campaign has been accomplished. The comparison results have shown good agreement. Once validated, the FEM strategy has been utilized for examining the influence of tool wear on the effective rake angle and the related tool stresses, individuating the excessive positive rake angle value as the final tool breakage mechanism.

26 August 2022 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Cristian CappelliniCristian Cappellini
Cristian Cappellini
Yuri BorgianniYuri Borgianni
Yuri Borgianni
lorenzo maccionilorenzo maccioni
lorenzo maccioni
CNChiara Nezzi
Chiara Nezzi
Despite the large diffusion of additive manufacturing, and markedly fused filament fabrication, some quality aspects of the 3D printed parts have not been dealt with sufficiently. This applies particularly to geometric accuracy and the influence process parameters have on it. The paper describes an experiment in which 27 copies of a part were manufactured by means of a desktop fused filament fabrication device while manipulating layer thickness, printing speed, and number of contours. The effect of such process parameters on five typologies of geometric deviations and the duration of the printing process was assessed. While all the process parameters showed effects on both the printing time and some geometric deviations, the number of contours resulted as the most critical factor. The paper includes a proposal to optimize geometric accuracy and the rapidity of the process, which foresees the maximization of the number of contours, the minimization of the layer thickness, and the use of an intermediate value for printing speed.

28 March 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Cristian CappelliniCristian Cappellini
Cristian Cappellini
AMAlessio Malandruccolo
Alessio Malandruccolo
AAAndrea Abeni
Andrea Abeni
AAAldo Attanasio
Aldo Attanasio
The reliability of a prosthetic implant needs durability, biocompatibility, and osseointegration capability. Accomplishing these characteristics, Ti-6Al-4V alloy is the main used material for implant fabrication. Moreover, it can be processed by additive manufacturing technique, permitting to meet the needs of patience-tailored, often complex shaped, prosthesis topologies. Once an implant is realized, it is finished by machining operations and its osseointegration capability is heavily influenced by the resulting surface roughness. Consequently, the assessment of this latter is mandatory to evaluate the prosthesis durability. This paper presents the analysis of surface roughness of Ti-6Al-4V micro-milled specimens produced by plastic deformation, selective laser melting, and electron beam melting processes. A central composite design was employed for planning the cutting tests. The comparison between surface roughness results and its values for enhancing osseointegration, firstly permitted to individuate the range of micro-milling suitable applications, which have been individuated as ball joints, bone plates, and screws. Next, the statistical analysis of the experimental measurements allowed the identification of the most influential micro-milling parameters together with the determination of the mathematical models of surface roughness by response surface methodology. The good comparison among calculated and experimental results revealed the reliability of the model, allowing the prediction of achievable surface roughness once micro-machining parameters are selected, or their optimization as a function of a desired surface roughness value.

13 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FCFranco Concli
Franco Concli
lorenzo maccionilorenzo maccioni
lorenzo maccioni
LFLorenzo Fraccaroli
Lorenzo Fraccaroli
Cristian CappelliniCristian Cappellini
Cristian Cappellini
The characterization of new materials for enabling gear design is definitely a fundamental objective in the gear industry and research. Single Tooth Bending Fatigue (STBF) tests can be performed to speed up this process. However, it is well known that STBF tests tend to overestimate material strength compared to tests performed directly on meshing gears (MG) which, in turn, require an excessively long test time. Therefore, it is common practice to use a constant correction factor fkorr of 0.9 to translate STBF results for designing actual MG (e.g., via ISO 6336). Recent works involving a combination of Finite Element Models (FEM) and multiaxial (non-proportional) fatigue criteria based on the critical plane concept have highlighted that the assumption of considering fkorr as a constant independent of the gear design parameters leads to inaccurate results. However, in previous studies, no correlation between fkorr and gear design parameters has emerged. In the present paper, the influence of the normal pressure angle (αn), the profile shift coefficient (x*), and the normal module (mn) on fkorr was investigated by analyzing FEM simulations with the Findley fatigue criterion. 27 gear geometries were studied by varying the above 3 parameters in 3 levels (full factorial DOE). These geometries were simulated in both MG and STBF configurations. The results of the 54 FEM simulations were analyzed by applying the Findley fatigue criterion and the corresponding fkorr were calculated. The correlation between fkorr and αn, x* and mn was investigated using the Analysis of Variance (ANOVA) technique. The results show that the only gear design parameter influencing fkorr is x* hence, a regression model for fkorr including x* has been developed. This latter has been then adopted for calculating and comparing fkorr values from other combination of the parameters found in literature, giving good correspondence.


3 June 2022 in Materials Today Communications
Verified
Journal Article
Closed access
TFThongchai Fongsamootr
Thongchai Fongsamootr
PSPana Suttakul
Pana Suttakul
NTNakorn Tippayawong
Nakorn Tippayawong
PNPruettha Nanakorn
Pruettha Nanakorn
Cristian CappelliniCristian Cappellini
Cristian Cappellini