A uniformly n-type doped GaN:Si nanowire (NW), with a diameter of d = 90 nm and a length of 1.2 μm, is processed into a metal-semiconductor field effect transistor (MESFET) with a semi-cylindrical top Ti/Au Schottky gate. The FET is in a normally-ON mode, with the threshold at −0.7 V and transconductance of gm ∼ 2 μS (the transconductance normalized with NW diameter gm/d > 22 mS/mm). It enters the saturation mode at VDS ∼ 4.5 V, with the maximum measured drain current IDS = 5.0 μA and the current density exceeding JDS > 78 kA/cm2.
The massive data transfer rates of nowadays mobile communication technologies demand devices not only with outstanding electric performances but with example stability in a wide range of conditions. Surface acoustic wave (SAW) devices provide a high Q-factor and properties inherent to the employed materials: thermal and chemical stability or low propagation losses. SAW resonators and filters based on synthetized by reactive magnetron sputtering on single crystal and polycrystalline diamond substrates were fabricated and evaluated. Our SAW resonators showed high electromechanical coupling coefficients for Rayleigh and Sezawa modes, propagating at 1.2 GHz and 2.3 GHz, respectively. Finally, SAW filters were fabricated on /diamond heterostructures, with working frequencies above 4.7 GHz and ~200 MHz bandwidths, confirming that these devices are promising candidates in developing 5G technology.