Elisa Mammoliti

Dr. Elisa Mammoliti

Università Politecnica Marche, Ancona, Marche, Italy
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

20 February 2021 in Hydrology
Verified
Journal Article
Open access
PDF file
Elisa MammolitiElisa Mammoliti
Elisa Mammoliti
Davide FronziDavide Fronzi
Davide Fronzi
AMAdriano Mancini
Adriano Mancini
Daniela ValigiDaniela Valigi
Daniela Valigi
Alberto TazioliAlberto Tazioli
Alberto Tazioli
Nowadays, the balance between incoming precipitation and stream or spring discharge is a challenging aspect in many scientific disciplines related to water management. In this regard, although advances in the methodologies for water balance calculation concerning each component of the water cycle have been achieved, the Thornthwaite–Mather method remains one of the most used, especially for hydrogeological purposes. In fact, in contrast to physical-based models, which require many input parameters, the Thornthwaite–Mather method is a simple, empirical, data-driven procedure in which the error associated with its use is smaller than that associated with the measurement of input data. The disadvantage of this method is that elaboration times can be excessively long if a classical MS Excel file is used for a large amount of data. Although many authors have attempted to automatize the procedure using simple algorithms or graphical user interfaces, some bugs have been detected. For these reasons, we propose a WebApp for monthly water balance calculation, called WaterbalANce. WaterbalANce was written in Python and is driven by a serverless computing approach. Two respective European watersheds are selected and presented to demonstrate the application of this method.

13 May 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Elisa MammolitiElisa Mammoliti
Elisa Mammoliti
Francesco Di StefanoFrancesco Di Stefano
Francesco Di Stefano
Davide FronziDavide Fronzi
Davide Fronzi
AMAdriano Mancini
Adriano Mancini
Eva Savina MalinverniEva Savina Malinverni
Eva Savina Malinverni
Alberto TazioliAlberto Tazioli
Alberto Tazioli
This study wants to give a contribution to the semi-automatic evaluation of rock mass discontinuities, orientation and spacing, as important parameters used in Engineering. In complex and inaccessible study areas, a traditional geological survey is hard to conduct, therefore, remote sensing techniques have proven to be a very useful tool for discontinuity analysis. However, critical expert judgment is necessary to make reliable analyses. For this reason, the open-source Python tool named DCS (Discontinuities Classification and Spacing) was developed to manage point cloud data. The tool is written in Python and is based on semi-supervised clustering. By this approach the users can: (a) estimate the number of discontinuity sets (here referred to as “clusters”) using the Error Sum of Squares (SSE) method and the K-means algorithm; (b) evaluate step by step the quality of the classification visualizing the stereonet and the scatterplot of dip vs. dip direction from the clustering; (c) supervise the clustering procedure through a manual initialization of centroids; (d) calculate the normal spacing. In contrast to other algorithms available in the literature, the DCS method does not require complex parameters as inputs for the classification and permits the users to supervise the procedure at each step. The DCS approach was tested on the steep coastal cliff of Ancona town (Italy), called the Cardeto–Passetto cliff, which is characterized by a complex fracturing and is largely affected by rockfall phenomena. The results of discontinuity orientation were validated with the field survey and compared with the ones of the FACETS plug-in of CloudCompare. In addition, the algorithm was tested and validated on regular surfaces of an anthropic wall located at the bottom of the cliff. Eventually, a kinematic analysis of rock slope stability was performed, discussing the advantages and limitations of the methods considered and making fundamental considerations on their use.

22 February 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Elisa MammolitiElisa Mammoliti
Elisa Mammoliti
APAlessandro Pepi
Alessandro Pepi
Davide FronziDavide Fronzi
Davide Fronzi
Stefano MorelliStefano Morelli
Stefano Morelli
TVTiziano Volatili
Tiziano Volatili
Mirko FrancioniMirko Francioni
Mirko Francioni
The stability of a rock slope is strongly influenced by the pattern of groundwater flow through the fracture system, which may lead to an increase in the water pressure in partly open joints and the consequent decrease in the rock wall strength. The comprehension of the fracture pattern is a challenging but vital aspect in engineering geology since the fractures’ spatial distribution, connectivity, and aperture guide both the water movement and flow quantity within the rock volume. In the literature, the most accepted methods to hydraulically characterise fractured rocks in situ are the single borehole packer test, the high-resolution flow meters for fractures, and the artificial tracer tests performed in boreholes. However, due to the high cost a borehole requires and the general absence of wells along coastal cliffs, these methods may not be appropriate in rockfall-prone areas. In this study, an unsaturated rocky cliff, strongly affected by rockfalls, was investigated by combining kinematic analysis, Discrete Fracture Network (DFN) modelling, and artificial tracer tests. The DFN model and potential rock block failure mechanisms were derived from high-resolution 3D virtual outcrop models via the Structure from Motion (SfM) photogrammetry technique. An artificial tracer was injected using a double ring infiltrometer atop the recharge zone of the slope to determine the infiltration rate and validate the DFN results. The DFN and tracer test methods are frequently used at different spatial scales and for different disciplines. However, the integration of digital photogrammetry, DFN, and tracer tests may represent a new step in rockfall and landslide studies. This approach made possible the identification of groundwater flow patterns within the fracture system and revealed about a 10-day tracer transit time from the injection area and the monitored slope, with similar conductivity values gathered from both the DFN and tracer test. Planar and wedge failures with volumes ranging from 0.1 and 1 m3 are the most probable failure mechanisms in the areas. The results were consistent with the delay between the intense rainfall and the slope failures previously documented in the study area and with their mechanisms.

31 May 2022 in Hydrology
Verified
Journal Article
Open access
PDF file
Elisa MammolitiElisa Mammoliti
Elisa Mammoliti
Davide FronziDavide Fronzi
Davide Fronzi
Costanza CambiCostanza Cambi
Costanza Cambi
FMFrancesco Mirabella
Francesco Mirabella
CCCarlo Cardellini
Carlo Cardellini
Daniela ValigiDaniela Valigi
Daniela Valigi
Carbonate aquifers are characterised by strong heterogeneities and their modelling is often a challenging aspect in hydrological studies. Understanding carbonate aquifers can be more complicated in the case of strong seismic events which have been widely demonstrated to influence groundwater flow over wide areas or on a local scale. The 2016–2017 seismic sequence of Central Italy is a paradigmatic example of how earthquakes play an important role in groundwater and surface water modifications. The Campiano catchment, which experienced significant discharge modifications immediately after the mainshocks of the 2016–2017 seismic sequence (Mmax = 6.5) has been analysed in this study. The study area is within an Italian national park (Sibillini Mts.) and thus has importance from a naturalistic and socio-economic standpoint. The research strategy coupled long-period artificial tracer tests (conducted both before and after the main earthquakes), geochemical and discharge analyses and isotope hydrology with hydrogeological cross-sections. This study highlights how the seismic sequence temporarily changed the behaviour of the normal faults which act predominantly as barriers to flow in the inter-seismic period, with water flow being normally favoured along the fault strikes. On the contrary, during earthquakes, groundwater flow can be significantly diverted perpendicularly to fault-strikes due to co-seismic fracturing and a consequent permeability increase. The interaction between groundwater and surface water is not only important from the point of view of scientific research but also has significant implications at an economic and social level.

28 October 2016 in Journal of Maps
Verified
Journal Article
Open access
Rodolfo CarosiRodolfo Carosi
Rodolfo Carosi
EDEnrico D’addario
Enrico D’addario
Elisa MammolitiElisa Mammoliti
Elisa Mammoliti
CMChiara Montomoli
Chiara Montomoli
MSMatteo Simonetti
Matteo Simonetti
The Ferriere-Mollieres Shear Zone (FMSZ) is a regional shear zone cross-cutting the Argentera External Crystalline Massif (Western Alps). It shows a NW-SE striking dextral shear zone separating two Variscan migmatitic complexes: the Tinèe to the SW and the Gesso-Stura-Vesubiè to the NE. Geological-structural mapping at 1:10,000 scale focused on the characterization of mylonitic deformation. A deformation gradient has been observed towards the core of the shear zone marked by the occurrence of ultramylonites and rare phyllonitic layers. Protomylonites passing to unsheared migmatites occur in the outer zones. Low-angle shear zones with a top-to-the S and SW sense of shear cross-cut the previous mylonitic foliation. The FMSZ is a Variscan transpressive shear zone activated during the Late Carboniferous under amphibolite-facies metamorphic condition. The shear zone has been partially reactivated under greenschist-facies metamorphic conditions during Alpine Orogenesis.