Francesco Gagliardi

Mr. Francesco Gagliardi

University of Pisa, Pisa, Tuscany, Italy
orcid
Post-Doc Research Associate

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 April 2023 in Batteries
Verified
Journal Article
Open access
PDF file
Andrea RiaAndrea Ria
Andrea Ria
GMGiuseppe Manfredini
Giuseppe Manfredini
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
MVMichele Vitelli
Michele Vitelli
PBPaolo Bruschi
Paolo Bruschi
Massimo PiottoMassimo Piotto
Massimo Piotto
A compact electronic circuit capable of performing Electrochemical Impedance Spectroscopy (EIS) on either single Lithium-ion cells or modules formed by the series of two cells is presented. The proposed device, named Double Cell Management Unit (DCMU), constitutes an important improvement to a recently proposed cell management unit, which combined EIS acquisition functions with a multichannel sensor interface compatible with thermistors, strain-gauges and moisture detectors. The proposed circuit maintains the versatility of the previous version and significantly extends the EIS frequency range, allowing vector impedance measurements from 0.1 Hz to about 15 kHz. The capability of handling both single Lithium-ion cells or series of two cells is obtained by adding a few external components to the previous version. This also allowed increasing the stimulation current to a maximum amplitude of 200 mA, resulting in improved resolution. Experiments consisting in EIS acquisition performed on batteries of different capacity at different temperatures and states of charge are described. Estimated impedance resolution (standard deviation) is 20 μΩ obtained at 1 kHz with a stimulation current of 100 mA amplitude.

5 June 2024 in IEEE Access
Verified
Journal Article
Open access
Alessandro CataniaAlessandro Catania
Alessandro Catania
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
Massimo PiottoMassimo Piotto
Massimo Piotto
PBPaolo Bruschi
Paolo Bruschi
MDMichele Dei
Michele Dei
This paper introduces and experimentally validates a switched-capacitor inverter-based second-order 3-tap FIR single-bit Delta-Sigma Modulator (ΔΣM) designed for nanowatt-level analog-to-digital conversion in wearable healthcare devices. The focus is on applications with energy harvesters, emphasizing continuous monitoring of chronic conditions and closed-loop drug-delivery systems. The design methodology addresses ultralow-power considerations at both architectural and transistor levels, tackling challenges like process variations without relying on complex digital calibration techniques. Experimental results from prototypes, implemented on a standard 180-nm CMOS process, reveal a peak SINAD of 77.8 dB and SNR of 79.4 dB, with a power consumption of 71.5 nW at a 900-mV supply. Measurements across nine chip samples are consistent, demonstrating low DC offset, with low temperature drift and live sensitivity. The outcomes confirm the modulator suitability for energy-harvested wearable systems.

6 June 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
GMGiuseppe Manfredini
Giuseppe Manfredini
Andrea RiaAndrea Ria
Andrea Ria
Massimo PiottoMassimo Piotto
Massimo Piotto
PBPaolo Bruschi
Paolo Bruschi
The design of low-phase-noise fully integrated frequency references is often a critical aspect in the development of low-cost integrated circuits for communication interfaces, sensing platforms, and biomedical applications. This work first discusses relaxation oscillator topologies and design approaches aimed at minimizing the phase noise; then, a single-comparator low-phase-noise RC relaxation oscillator is proposed, featuring a novel comparator self-threshold-adjustment technique. The oscillator was designed for a 10 MHz oscillation frequency. Electrical simulations performed on a 0.18 μm CMOS design confirmed that the proposed technique effectively rejects the flicker component of the comparator noise, allowing for a 152 dBc/Hz figure of merit at a 1 kHz offset frequency. The standard deviation of the jitter accumulated across 10k oscillation cycles is lower than 4 ns. The simulated current consumption of the circuit is equal to 50.8 μA with a 1.8 V supply voltage. The temperature sensitivity of the oscillation frequency is also notably low, as its worst-case value across process corners is equal to −20.8 ppm/°C from −55 °C to 125 °C.

18 November 2024 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Open access
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
DSDanilo Scintu
Danilo Scintu
Massimo PiottoMassimo Piotto
Massimo Piotto
PBPaolo Bruschi
Paolo Bruschi
MDMichele Dei
Michele Dei
Driven by the ongoing challenge of designing high-accuracy digital-to-analog converters (DACs) at the cost of a relatively small area occupation, optimal combination algorithms (OCAs) recently gained attention within the myriad of possible calibration techniques for DACs. OCAs show appealing properties with respect to traditional approaches such as dynamic element matching (DEM). At start-up or upon request, mismatches affecting DAC elements are measured on-chip, allowing rearrangement in the selection logic of the DAC unit elements. The newly found arrangement is, hence, used during normal operation, achieving superior linearity. As of today, several alternative OCAs have been proposed; however, designers willing to implement OCA-calibrated DACs are faced with unclear tradeoffs and insufficient design guidelines. In this work, we provide a detailed comparison of existing OCAs based on statistical behavioral simulations. Starting from this, we investigate the relationships between OCAs’ performances and circuit-level design aspects. Specifically, OCAs’ effectiveness in improving the static linearity is linked to the number of DAC bits and the accuracy of the auxiliary comparator required by every OCA. Unforeseen trends emerge, and new design considerations are suggested, fostering novel awareness on the subject of high-accuracy DAC designs enabled by OCA-based calibration techniques.

5 December 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
Andrea RiaAndrea Ria
Andrea Ria
Massimo PiottoMassimo Piotto
Massimo Piotto
PBPaolo Bruschi
Paolo Bruschi
Accuracy and stability of current references (CRs) represent challenging requirements in modern analog integrated design, dictating the need for PVT-insensitive implementations. In this work, we investigate a solution relying on the combination of analog CR topologies with an automatic on-chip temperature calibration, based on a minimum-current-search principle. The proposed algorithm does not require explicit temperature sensing and allows improving the temperature coefficient (TC) by a factor of 3 with respect to the analog core. The CR circuit was designed in 0.18 m CMOS for an output current of 469 nA. Mixed-signal simulations resulted in a TC of 114 ppm/∘C (averaged across 200 Monte Carlo runs) and in a relative standard deviation of 0.78% for the reference current, which are competitive results compared with the state of the art.

17 April 2024 in Chips
Verified
Journal Article
Open access
PDF file
MDMichele Dei
Michele Dei
Francesco GagliardiFrancesco Gagliardi
Francesco Gagliardi
PBPaolo Bruschi
Paolo Bruschi
This review is aimed at the integrated circuit design community and it explores slew-rate enhancement techniques for switched-capacitor amplifiers, with a primary focus on optimizing settling time within power constraints. Key challenges are addressed, including the selection between single-stage and two-stage amplifiers, along with the utilization of advanced circuit-level techniques for slew-rate enhancement. Presently, there exists a gap in comprehensive discussion, with reliance primarily on two Figures of Merit aimed at assessing power efficiency under specific capacitive loads. However, these metrics fail to adequately assess the performance of the existing slew-rate enhancer solutions at different values of capacitive loads. As a consequence, the designer lacks clear guidelines in practical situations. This review provides a state-of-the art mapping under a figure of merit dedicated to assess the whole settling delay, and also introduces a novel performance metric which highlights the role of the circuital architectures, regardless of external operating conditions. By offering a thorough examination, this review seeks to steer future research in switched-capacitor amplifier design, thereby facilitating informed decision-making and fostering innovation in the field.