As the IV generation of packaging, biopolymers, with the advantages of biodegradability, process ability, combination possibilities and no pollution to food, have become the leading food packaging materials. Biopolymers can be directly extracted from biomass, synthesized from bioderived monomers and produced directly by microorganisms which are all abundant and renewable. The raw materials used to produce biopolymers are low-cost, some even coming from agrion dustrial waste. This review summarized the advances in protein-based films and coatings for food packaging. The materials studied to develop protein-based packaging films and coatings can be divided into two classes: plant proteins and animal proteins. Parts of proteins are referred in this review, including plant proteins i.e., gluten, soy proteins and zein, and animal proteins i.e., casein, whey and gelatin. Films and coatings based on these proteins have excellent gas barrier properties and satisfactory mechanical properties. However, the hydrophilicity of proteins makes the protein-based films present poor water barrier characteristics. The application of plasticizers and the corresponding post-treatments can make the properties of the protein-based films and coatings improved. The addition of active compounds into protein-based films can effectively inhibit or delay the growth of microorganisms and the oxidation of lipids. The review also summarized the research about the storage requirements of various foods that can provide corresponding guidance for the preparation of food packaging materials. Numerous application examples of protein-based films and coatings in food packaging also confirm their important role in food packaging materials.
Waste tires are known as “black pollution”, which is difficult to degrade. The safe handling and recycling of waste tires have always been the focus of and difficulty for the global rubber industry. Pyrolysis can not only solve the problem of environmental pollution but also completely treat the waste tires and recover valuable pyrolysis products. This paper summarizes research progress on the pyrolysis of waste tires, including the pyrolysis mechanism; the important factors affecting the pyrolysis of waste tires (pyrolysis temperature and catalysts); and the composition, properties, and applications of the three kinds of pyrolysis products. The composition and yield of pyrolysis products can be regulated by pyrolysis temperature and catalysts, and pyrolysis products can be well used in many industrial occasions after different forms of post-treatment.
Carbon fiber significantly enhances the mechanical, thermal and electrical properties of rubber composites, which are widely used in aerospace, military, national defense and other cutting-edge fields. The preparation of a high-performance carbon fiber rubber composite has been a research hotspot, because the surface of carbon fiber is smooth, reactive inert and has a poor adhesion with rubber. In this paper, a high-performance rubber composite is prepared by mixing dopamine-modified staple carbon fiber with natural latex, and the mechanisms of modified carbon fiber-reinforced natural latex composite are explored. The experimental results show that the surface-modified staple carbon fiber forms uniform and widely covered polydopamine coatings, which significantly improve the interface adhesion between the carbon fiber and the rubber matrix. Meanwhile, when the concentration of dopamine is 1.5 g/L and the staple carbon fiber is modified for 6h, the carbon fiber rubber composite shows excellent conductivity, thermal conductivity, and dynamic mechanical properties, and its tensile strength is 10.6% higher than that of the unmodified sample.
In the tire industry, the combination of carbon black and silica is commonly utilized to improve the comprehensive performance of natural rubber so as to realize the best performance and cost-effectiveness. The corresponding mixing is divided into three processes (initial mixing, delivery, reactive mixing) by the serial modular continuous mixing method, thus achieving more accurate control of the mixing process, higher production efficiency and better performance. Moreover, the optimization of serial modular continuous mixing process parameters can not only improve the performance of composite materials, but help people understand the physical and chemical changes and the reinforcing mechanism of fillers in the mixing process. In this paper, the relationship among the parameters of eight processes and filler network structure, tensile strength, chemical reinforcing effect and tear resistance was explored through experiments. The deep causes of performance changes caused by parameters were analyzed. Consequently, the best process condition and the ranking of the influencing factors for a certain performance was obtained. Furthermore, the best preparation process of natural rubber (NR)/carbon black/silica composite was achieved through comprehensive analysis.
Pyrolysis is recognized as a promising technology for waste plastics management. Although there have been many studies on pyrolysis of waste plastics, there is still a lack of in-depth research on the mechanism of synergistic effect between mixed plastics and the mechanism of product formation. In this paper, based on the pyrolysis characteristics of Polystyrene, Polyethylene, and mixed plastics (Polystyrene/Polyethylene), it is demonstrated that a synergistic effect exists in the co-pyrolysis of Polystyrene/Polyethylene and affects the pyrolysis behavior and pyrolysis products. It was found that polystyrene chain segments containing C=C double bonds, generated from the pyrolysis of polystyrene, initiated the pyrolysis of polyethylene during the polystyrene/polyethylene co-pyrolysis, resulting in the termination pyrolysis temperature of the co-pyrolysis being advanced by 19.8 K. Due to the reduction in the termination pyrolysis temperature by 19.8 K, the average activation energy of the co-pyrolysis was reduced by about 14%. Compared with the weighted values of single-component plastics (Polystyrene and Polyethylene), the actual oil production of co-pyrolysis increased by 9.7% to 89.80%. At the same time, the content of low molecular weight Styrene and Toluene in pyrolysis oil increased by 12.3% and 1.65%, respectively. This study provides a useful and comprehensive reference for realizing the closed cycle of “from plastics to plastics”.