The strain rate dependent in-plane and through-thickness deformation and failure behaviour of textile reinforced polypropylene is investigated. An efficient in-plane parameter identification method based on rheological models is presented. Additionally, dynamic tensile, compression and shear tests were performed with woven and knitted textile reinforced thermoplastic composite specimens. As a result, the experimental methodology as well as strain rate dependent stiffness and strength properties within a strain rate range of 10−5 up to 103 1/s are presented. A phenomenological 3D material model based on the Cuntze failure criteria, accounting for strain rate dependency and damage evolution is implemented in Abaqus/Explicit. The user defined material model (VUMAT) is used for finite element (FE) studies of the crash and impact experiments. Exemplary numerical predictions are presented and compared
The aim of this study is the biomimetic optimisation of branched fibre-reinforced composites based on the detailed analysis of biological concept generators. The methods include analyses of the functional morphology and biomechanics of arborescent monocotyledons and columnar cacti as well as measurements and modelling of mechanical properties of biomimetic fibre-reinforced composites. The key results show evidence of notch stress reduction by optimised stem-branch-attachment morphology in monocotyledons and columnar cacti. It could be shown that some of these highly interesting properties can be transferred into biomimetic fibre-reinforced composites.
Through-Thickness Reinforcement (TTR) technologies are well suited to improving the mechanical properties in the out-of-plane direction of fibre-reinforced composites. However, besides the enhancement of delamination resistance and thus the prevention of overall catastrophic failure, the presence of additional reinforcement elements in the composite structure affects also the mechanical properties in in-plane direction. In this work, the flexural behaviour of a glass-polypropylene (GF/PP) hybrid yarn-based composite with TTR in form of metallic pins has been investigated experimentally and numerically. The insertion of the metallic pins is realized via thermoactivated pinning technology (TAP). In four-point-bending tests, it is shown that the flexural stiffness and strength decreases with an increase of the overall pin density. Hereby, it is observed that the pins act as crack initiators. For numerical modelling on specimen level, a continuum damage mechanic (CDM) model is used to predict the nonlinear deformation response of the composite, as well as fibre fracture and matrix cracking. A debonding and slipping phenomena of the pin in the composite is modelled by a cohesive zone modelling approach for the interface between pin and composite.
28 January 2022 in Composites Part A: Applied Science and Manufacturing