This work explores the development of smart array antennas, able to electronically change their beam patterns through reconfigurable linear, planar, or conformal parasitic structures controlled by mean of a set of electronic switches namely the radio frequency micro-electromechanical switches (RF-MEMS). The motivation of this study is to extend and make competitive the use of reconfigurable antenna arrays in areas such as the Internet of Things (IoT) and wireless sensor networks. These hot research areas require a capillary distribution of sensors characterized by compact dimensions and limited cost. The radiating systems play a key role in such applications since the improvement of the radiating properties can dramatically reduce the power consumption of such sensors and extend their operative range. Standard smart antenna arrays such as phased, or fully adaptive arrays are extremely expensive, expensive and difficult to control. In this work, the use of smart reconfigurable antenna arrays that do not require expensive digital variable phase shifters and attenuators has been considered. The proposed antenna structures are based on reconfigurable parasitic structures, that thanks to suitable RF-MEMs switches are able to obtain a desired beam pattern, by steering the main beam in a given direction, removing eventually interfering signals and maximizing the signal-to-noise ratio SNR. The versatility, simplicity, and low cost of such antennas make them particularly suitable for the emergent wireless sensor networks and IoT applications. Theoretical background, design guidelines, and suggestions for their fabrication are detailed in this work. Some antenna models for different practical applications are designed, optimized, numerically assessed with commercial electromagnetic simulators, and commented to provide a valid alternative to researchers involved in antenna design for IoT applications.
Brain tumors are pathologies characterized by a high degree of mortality. An early diagnosis of these pathologies could reduce mortality and limit the adverse effects of brain surgery. Computer-aided tomography (CT), and magnetic resonance imaging (MRI) are fundamental diagnostic methods. They offer lots of helpful information that help medical operators to make an early and effective diagnosis. However, a human operator must analyze and classify the enormous amount of data provided. This process is time-consuming, and sometimes the information is not directly visible to the human eye, leading to lost essential information that could be useful for obtaining a correct and early diagnosis. In such a scenario, the development of suitable tools aimed at helping the human operator is essential. In particular, artificial intelligence (AI) methodologies could help the clinical operator correctly classify different tumoral pathologies, suggest more appropriate therapy, and support the surgeon in reducing invasiveness. All AI systems require a so-called training phase and suitable feature identification to work properly. In this work, we propose a tool to speed up brain tumor segmentation and feature extraction. In particular, we focus on Glioblastoma (GBM), a brain tumor characterized by high tissue heterogeneity and difficult segmentation. The method has been assessed by considering an experimental dataset belonging to the Radiomic Laboratory of the University of Trento. The obtained results are encouraging and demonstrate that the proposed method can be very useful to speed up the pathologies segmentation and features extraction compared to other well-known methods.
This paper presents the design and analysis of a dual-band patch antenna that leverages the reconfigurability of Minkowski fractal geometry to achieve frequency agility. The proposed antenna incorporates Radio Frequency Micro-Electro-Mechanical Systems (RF-MEMS) switches to selectively activate different iterations of the Minkowski fractal, thereby enabling dynamic tuning of the operating frequency bands. This reconfiguration mechanism allows for effective miniaturization, particularly at lower frequencies, without altering the overall physical dimensions of the antenna. Each additional fractal iteration results in a shift of the resonance towards lower frequencies, a behavior that is exploited to maintain compactness while achieving dual-band functionality. The antenna has been specifically optimized to operate in the 1 GHz and 4 GHz frequency bands, and its performance has been validated through full-wave electromagnetic simulations using a commercial software tool. The resulting design is characterized by a compact footprint, structural simplicity, and low manufacturing cost, making it an excellent candidate for space-constrained platforms such as small satellites and CubeSats. Furthermore, the integration of RF-MEMS technology offers high precision in switching and improved reliability compared to traditional tuning elements, further enhancing the antenna’s applicability in modern reconfigurable communication systems.
This paper presents a tunable Frequency Selective Surface (FSS) for the L1-band of navigation frequencies that utilises a MEMS switch. The reconfigurable frequency-selective electromagnetic filter, achieved by combining hard magnetic materials with microelectromechanical systems (MEMS), provides a novel approach to reconfigurable frequency-selective surfaces (FSS). By incorporating magnetically actuated dipole components that can tilt away from the base surface, we can adjust the operating frequency of the FSS without physically modifying the size of the dipole components. The 9 × 9 array, measuring 365 mm, consists of plates made from Rogers RO3003 material, each with dimensions of 531.2 × 531.2 × 8.768 mm, layered with a 0.03 mm-thick copper conductor (Cu). The proposed system features a cross dipole printed on a Rogers-RO3003 substrate, with a MEMS switch placed between one of the dipole arms to adjust its length. The MEMS switch facilitates frequency tuning by altering the length of a rectangular dipole. This phase modulation technique enables the steering of reflected waves, thereby enhancing beam resolution and coverage, while allowing the intelligent reflecting surface (IRS) to control the reflection of reflection. The presented reconfigurable FSS design has effectively demonstrated the ability to tune its resonant frequency for the L1-band without physically changing its dimensions. The design was assessed using the commercial simulation software CST, and the numerical results corroborate the findings, thereby confirming its effectiveness.
This work presents the design of a compact, omnidirectional, and circular polarized antenna for first-person-view (FPV) drones. An FPV drone is an aircraft used in sporting activities, where the pilot, equipped with a visor, controls the drone’s activities. Due to the high velocity of FPV and the required low reaction time, the radio connection must be safe and accurate. An omnidirectional antenna with circular polarization, high gain, low weight, and good mechanical robustness is mandatory for FPV design. The proposed antenna is designed and fabricated on a ceramic substrate operating at 5.8 GHz. The prototypes tested ensure that the proposed design is a potential candidate for FPV applications. A set of antenna prototypes has been designed, fabricated, and assessed numerically and experimentally, demonstrating the capabilities and potential of the proposed antenna design.