This article presents issues related to the current approval procedures in the group of off-road vehicles. Our research aimed to demonstrate significant differences between actual railway vehicle operation and stationary homologation tests regarding exhaust emissions. The research cycle consisted of analyzing emissions of toxic compounds from exhaust systems under real operating conditions, supplemented by a temporal share analysis based on the denormalized NRTC test upon which the tested object was homologated. Based on the conducted analyses, a significant difference was found between the actual operation of the tested railway vehicle and the stationary homologation test. By interpreting emission intensities within the parameter ranges of the propulsion unit’s operation, key areas with a significant impact on the vehicle’s overall emissions were identified. Based on the obtained results, a critical opinion is expressed regarding current homologation standards for the off-road vehicle group and the necessity for further empirical research in the area of actual operation of the tested vehicle group.
The article presents the development and results of emission studies conducted in Poland in the context of global real-driving emissions research. Although the European Union has continuously tightened exhaust-emission standards, road transport remains one of the major sources of air pollution. Several research centers in Poland—including Rzeszów University of Technology, Poznan University of Technology, and the Motor Transport Institute—have been conducting on-road emission measurements for many years across a wide spectrum of vehicles: conventional, hybrid (including plug-in hybrids), and fully electric. The findings show that emissions under real-world driving conditions often differ from those obtained in homologation tests, particularly for nitrogen oxides and particulate matter. Ambient temperature, road gradient, and driving phases (urban, rural, motorway) were also identified as influential factors. Polish research centers have developed analytical tools enabling comparison between laboratory and on-road tests and allowing real-driving emissions to be estimated based on chassis-dynamometer data. Studies on plug-in hybrids highlighted that these vehicles remain environmentally beneficial only when regularly charged; otherwise, their emissions can increase sharply. Overall, the research confirms that on-road testing is essential for a reliable evaluation of vehicle performance, and the results can contribute to designing more eco-friendly technologies and improving future emission regulations.
Pollutant emission measurements under real operating conditions using Portable Emission Measurement Systems (PEMS) have been conducted for various groups of vehicles and machinery for many years. Since 2014, Real Driving Emissions (RDE) procedures were defined and implemented in homologation testing for Heavy Duty Vehicles (HDVs) and for Passenger Cars (PCs) and Light Duty Vehicles (LDVs) in 2017. In the case of Non-Road Mobile Machinery (NRMM), there is an ongoing effort to conduct real-world emission measurements; however, threshold values for harmful exhaust compounds have not yet been defined. This article presents an analysis of measurement results conducted for a rail bus equipped with two diesel engines. These six-cylinder engines have a displacement of 12.8 dm³ and an effective power output of 257 kW. Measurements were performed on a regular, non-electrified railway line between Krzyż Wielkopolski and Trzcianka, spanning a distance of 36 km. Additionally, the shunting operations of the rail bus at Krzyż Wielkopolski station were analyzed. During the study, emissions of gaseous compounds were measured using the Semtech DS analyzer by Sensors Inc., while particulate mass was measured with an AVL Micro Soot Sensor, and the particle number and size distribution were assessed with the Engine Exhaust Particulate Sizer by TSI. Due to the use of a rail vehicle, the testing procedures were designated as Real Train Emissions (RTE).
The current policy of the European Union aims to reduce the negative impact of the transport sector on the emission of pollutants generated by combustion engines into the atmosphere. One of the key trends in this expansion is to increase the share of public transport. The article presents a scenario of passenger travel in an urban agglomeration, using a passenger car and a bus. The input data were obtained from tests carried out under real operating conditions using PEMS (Portable Emissions Measurement Systems) equipment. Both objects tested met the same emission standard – Euro 5/V. The obtained pollutant emission values were converted into emissions generated by passengers. The results show that travelling by bus has a much lower impact on the environment, but the journey time is longer and requires the bus schedule to be adjusted to the travel plan.
This paper investigates the application of high-capacity supercapacitors in railway systems, with a particular focus on their role in energy recovery during braking processes. The study highlights the potential for significant energy savings by capturing and storing energy generated through electrodynamic braking. Experimental measurements conducted on a diesel–electric multiple unit revealed that approximately 28.3% to 30.5% of the energy could be recovered from the traction network, regardless of the type of drive used—whether electric or diesel. This research also explores the integration of starch-based carbon as an electrode material in supercapacitors, offering an innovative, sustainable alternative to traditional graphite or graphene electrodes. The carbon material was obtained through a simple carbonization process, with experimental results demonstrating a material capacity of approximately 130 F/g. To quantify the energy recovery, calculations were made regarding the mass and power requirements of the supercapacitors. For the tested vehicle, it was estimated that around 28.7% of the energy could be recovered during the braking process. To store 15 kWh of energy, the total mass of the capacitors required is approximately 245.1 kg. The study emphasizes the importance of increasing voltage levels in railway systems, which can enhance energy transmission and utilization efficiency. Additionally, the paper discusses the necessity of controlled energy discharge, allowing for the flexible management of energy release to meet the varying power demands of trains. By integrating high-voltage supercapacitors and advanced materials like starch-based carbon, this research paves the way for more sustainable and efficient railway systems, contributing to the industry’s goals of reducing emissions and improving operational performance. The findings underscore the crucial role of these capacitors in modernizing railway infrastructure and promoting environmentally responsible transportation solutions.
1 September 2025 in Journal of Ecological Engineering
The article presents a proprietary method for assessing the environmental impact of a hybrid rail vehicle utilizing both electric traction and an internal combustion engine for propulsion. Current efforts aimed at decarbonizing transportation have led to an increase in the production of electric...