The aspect of safety in electronic devices has turned out to be a huge challenge for the world of science. Thus far, satisfactory power and energy densities, efficiency, and cell capacities have been achieved. Unfortunately, the explosiveness and thermal runaway of the cells prevents them from being used in demanding applications such as electric cars at higher temperatures. The main aim of this review is to highlight different electrolytes used in lithium-ion cells as well as the flammability aspect. In the paper, the authors present liquid inorganic electrolytes, composite polymer–ceramic electrolytes, ionic liquids (IL), polymeric ionic liquids, polymer electrolytes (solvent-free polymer electrolytes (SPEs), gel polymer electrolytes (GPEs), and composite polymer electrolytes (CPEs)), and different flame retardants used to prevent the thermal runaway and combustion of lithium-ion batteries (LIBs). Additionally, various flame tests used for electrolytes in LIBs have been adopted. Aside from a detailed description of the electrolytes consumed in LIBs. Last section in this work discusses hydrogen as a source of fuel cell operation and its practical application as a global trend that supports green chemistry.

The global shift towards sustainable energy solutions has prompted a reevaluation of traditional transportation methods. In this context, the replacement of electric cars with hydrogen-powered vehicles is emerging as a promising and transformative alternative. This publication explores the essence of this transition, highlighting the potential benefits and challenges associated with embracing hydrogen as a fuel source for automobiles. The purpose of this work is to provide a comprehensive comparison of electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs), analyzing their respective advantages and disadvantages. Additionally, this work will outline the significant changes occurring within the automotive industry as it transitions towards sustainable mobility solutions.

The article presents issues related to the assessment of concentrations of harmful substances in the exhaust gas cloud behind the vehicle. In the theoretical part, considerations about the harmfulness of exhaust gases and methods of detection of chemical compounds were made, and the issues of von Karman vortices and the Lambert-Beer law were referred to. The test object was a vehicle equipped with an SI engine meeting the Euro 3 standard. The drive unit had a capacity of 2.8 dm³, a rated power reaching 142 kW at 5500 rpm and a maximum torque of 280 Nm at 3500 rpm. The measurements of the dilution of the exhaust gas cloud behind the vehicle were made in stationary conditions (laboratory) and during actual operation in the Poznań agglomeration. In the research, technically advanced equipment from the PEMS group was used. In the analysis of the obtained results, detailed considerations were made regarding the influence of the location of the measuring probe in relation to the exhaust system. As can be seen from the obtained dependencies, the vehicle motion is favorable for the assessment of concentrations behind a moving object, because the ecological indicators at successive distances behind the exhaust system achieve better parameters in most points than in a stationary test.

Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.

The paper presents the investigations of exhaust emissions under actual operation of two rail vehicles: a track geometry vehicle and a clearance vehicle. The environmental assessment of this type of objects is difficult due to the necessity of adapting the measurement equipment and meeting the safety requirements during the tests (particularly regarding the distance from the overhead electrical lines). The authors have proposed and developed a unique research methodology, based on which a detailed exhaust emissions analysis (CO, HC, NO_x, and PM) was carried out. The complex assessment included the unit and on-track exhaust emissions. In the analyses, the authors also included the operating conditions of the powertrains of the tested machinery. The obtained environmental indexes were referred to the homologation standards, according to which the vehicles were approved for operation. Due to the nature of operation of the tested vehicles, the authors carried out a comprehensive environmental assessment in the daily and annual approach as well as in the aspect of their operation as combined vehicles, which is a novel approach to the assessment of the environmental performance of this type of objects.

The paper contains exhaust emission results for an RDE test drive of a passenger vehicle with a spark ignition bi-fuel engine fuelled with LPG. The tests were performed in accordance with the RDE test requirements, and their results were compared to the emission limits of the applicable EURO norm. The aim of the paper is to investigate the discrepancies in the real exhaust emissions between the gasoline-specific emission norms and real values from vehicle use when powered by LPG.