We describe in detail the construction and characterization of a Peltier-cooled long-wavelength infrared (LWIR) position-sensitive detector (PSD) based on the lateral effect. The device was recently reported for the first time to the authors’ knowledge. It is a modified PIN HgCdTe photodiode, forming the tetra-lateral PSD, with a photosensitive area of 1 × 1 mm2, operating at 205 K in the 3–11 µm spectral range, capable of achieving a position resolution of 0.3–0.6 µm using 10.5 µm 2.6 mW radiation focused on a spot of the 1/e2 diameter 240 µm, with a box-car integration time of 1 µs and correlated double sampling.
We examined the effect of SiO2 passivation on the parameters of mesa heterostructure InAs/InAsSbP photodiodes with a spectral responsivity 50% cut off at 3.5 µm at 295 K, specific to the InAs absorber layer. The R0A product was found to increase by 30% after passivation of the devices of 113 µm in diameter, up to 0.9 Ωcm2, while for those with a diameter of 1.13 mm, R0A of 2.2 Ωcm2 was achieved, with a value of D* > 3 × 109 cmHz1/2/W at the peak of the spectrum, 1 kHz, 0 V bias, 295 K. To the best of our knowledge, this is the highest R0A value at room temperature reported to date for a photodiode with an InAs absorber.
The demand for fast mid-wave infrared photodetectors is fueled by high-rate free-space optical communication and optical frequency comb spectroscopy. To date, only a few multi-GHz photodetectors have shown sensitive room-temperature operation in the 3.0–3.7 μm band, yet their commercial availability remains scarce. In this work, we present the remarkable response speed of an InAs/InAsSbP p-Bp-i-n barrier detector based on a p-InAsSbP/n-InAs heterostructure—a technological platform typically not associated with high-frequency operation. A weakly reverse-biased photodiode with a diameter of 121 μm achieves a −3 dB electrical bandwidth of 2.4 GHz and −20 dB bandwidth of 8.0 GHz. This is the best result in this class of mid-infrared photodetectors confirmed optically. High signal-to-noise photodetection is also demonstrated at frequencies exceeding 19 GHz. The relatively simple device structure (devoid of cascaded structure or type-II superlattice) was realized on the mature InAs material platform, which opens new perspectives for accessible, sensitive, multi-GHz photodetectors for the 3.0–3.7 μm spectral region.
12 March 2026 in IEEE Transactions on Electron Devices
We report on the development of a passivation technology for InGaAsSb nBp photodiodes incorporating an AlGaSb barrier, aimed at achieving bulk-limited leakage currents and enhanced detectivity in detectors with a photosensitive area of 0.01mm2. Following passivation with SiO2 preceded by sulfidation, an increased yield of 113-$\mu $ m-diameter diodes exhibiting improved zero-bias resistance (${R}_{{0}}\text {)}$ was observed, particularly at lower temperatures reachable with thermoelectric coolers. At 215K, the dark current of devices of this size, with ${R}_{{0}}$ close to the average, was reduced by two orders of magnitude. At this temperature, the volume and surface generation rates of carriers were found to be equal for diodes with an average size of $150~\mu $ m. Furthermore, we investigated alternative approaches, including backside illumination through the GaSb substrate, the integration with immersion optics, and the use of ionic liquid (IL)-based passivation technique.