Modelling tools and transport models are required to assess the impact of measures for the effective planning of cycling routes in cities. This paper presents the methodology for developing a four-stage macroscopic model of bicycle traffic for the city of Gdynia, and its use in planning new bicycle routes, considering a modal shift. The model presented in this paper allows for the evaluation of the influence of the characteristics of the cycling infrastructure, along with the development of the cycling network based on the choice of cycling as an alternative to other modes of transport, by taking into account the modal shift. The model takes into account the influence of the longitudinal gradient, link, and surface type of cycling routes on the distribution and demand for bicycle traffic. The results of our research allow us to assess the impact of planned cycling routes on the reduction in the volume of car traffic, which is crucial for reducing energy consumption and negative environmental impacts. Experiences from the application of the model in Gdynia suggest that the model provides a strong basis to support mobility planning and monitoring processes in cities worldwide. Cities should take into account the methods proposed in this paper when planning the development of their transport systems.
Methods used to evaluate the impact of Intelligent Transport System (ITS) services on road safety are usually based on expert assessments or statistical studies. However, commonly used methods are challenging to apply in the planning process of ITS services. This paper presents the methodology of research using surrogate safety measures calculated and calibrated with the use of simulation techniques and a driving simulator. This approach supports the choice of the type of ITS services that are beneficial for traffic efficiency and road safety. This paper presents results of research on the influence of selected scenarios of variable speed limits on the efficiency and safety of traffic on the sections of motorways and expressways in various traffic conditions. The driving simulator was used to estimate the efficiency of lane-keeping by the driver. The simulation traffic models were calibrated using driving simulator data and roadside sensor data. The traffic models made it possible to determine surrogate safety measures (number of conflicts and their severity) in selected scenarios of using ITS services. The presented studies confirmed the positive impact of Variable Speed Limits (VSLs) on the level of road safety and traffic efficiency. This paper also presents recommendations and plans for further research in this area.
1 January 2016 in Transportation Research Procedia
While there are many examples of Intelligent Transport System deployments in Poland, more attention should be paid to traffic incident management and detection on dual-carriageways and urban street networks. One of the aims of CIVITAS DYN@MO, a European Union funded project, is to use TRISTAR (an Urban Transport Management System) detection modules to detect incidents at junctions equipped with traffic signals. First part of paper provides an overview of urban incident detection methods and algorithms. Second part of paper describes how the TRISTAR system infrastructure and software are currently used for detecting incidents on urban artery sections (with higher speed limit). Because the need to detect incidents on other arteries was identified, research were undertaken that will lead to the development of algorithms for the detection of incidents on the streets equipped with traffic signals. The initial results of simulation studies (using VISSIM software) are presented in the third part of the paper. Their objective was to initially select parameters for detecting incidents at junctions equipped with traffic signals. Further research will look at a fusion of variables and possible other variables that may develop the algorithms.
Intelligent Transport Systems are a valuable source of traffic information, covering both private and public vehicles. The main problem, however, is that very few studies are conducted to determine the speed of buses, trams and trolleys in urban networks in relation to traffic conditions. The paper investigates how ITS systems data could be used to model the speed of Public Transport vehicles. This is now possible thanks to the implementation of TRISTAR, an Integrated Traffic Management System covering the Tri - City (Gdansk, Sopot, Gdynia). The objective of the analysis is to develop a method for modelling Public Transport vehicle speed. To that end data from TRISTAR subsystems were used. The paper explains how various data can be collected, used and combined to develop speed models. The results of analyses and a proposed speed model for Gdynia's Public Transport vehicles are presented. This is to be further verified by applying the proposed method in another city or other cities. The speed model can also be used for updating existing public transport timetables. It is also possible to use the speeds for calibrating macroscopic simulation models.
This paper examines the influence of two selected car-following models on the outcomes of microscopic traffic simulations. The authors begin by reviewing the literature on the various traffic models, methods for estimating energy consumption, fuel use, and emissions. The authors discuss using surrogate safety measures derived from analysing vehicle trajectories in a microscopic traffic model to estimate safety levels. This paper also outlines the authors' approach to data acquisition and processing at the chosen test site. Most data are sourced from the city's Intelligent Transport System (ITS) services, including traffic flow volume, vehicle speed, and public transport travel times. The data gathered from Automatic Vehicle Location (AVL) systems was compared to manual travel time measurements. Depending on the analysed section Mean Average Error (MAE) ranging from 3 to 5 seconds was obtained, however, Mean Absolute Percentage Error (MAPE) ranged from 7.46% to 30.01%. The proposed method aims to evaluate the precision of the microscopic model in replicating real road networks and traffic based on available datasets. Two car-following models (CFM), Wiedemann 74 (W74), and Wiedemann 99 (W99) are chosen for further analysis. The models were validated using the GEH statistic and by comparing speed distributions. Both the models yielded satisfactory results. Different scenarios involving changes in traffic flow and to traffic signal configurations were analysed. While both W74 and W99 yielded satisfactory results, there were discernible disparities in the analyses. In general, W99 yields less favourable results, characterised by emissions, and delays compared to W74. Depending on the scenarios compared, the number of conflicts for W74 varied up to 56% (scenarios 2 and 4), and up to 78% for W99 (scenarios 1 and 4). The methodology presented by the authors can be used in future research to analyse various traffic control solutions concerning their impact on the environment and traffic safety. The observed differences underscore the importance of careful model selection and presented approach can serve as a foundation for developing guidelines for microscopic modelling and a multi-criteria approach to selecting the most effective implementation scenarios.