Igor Maksimov

Mr. Igor Maksimov

National Research University "Moscow Power Engineering Institute", Moscow, Moskva, Russia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 July 2023 in Energies
Verified
Journal Article
Open access
PDF file
Vladimir KindraVladimir Kindra
Vladimir Kindra
IMIgor Maksimov
Igor Maksimov
MOMaxim Oparin
Maxim Oparin
OZOlga Zlyvko
Olga Zlyvko
RARogalev Andrey
Rogalev Andrey
Nowadays, one of the most important areas in refining the energy sector in the developed countries is the transition to environmentally friendly technologies, and hydrogen energy production is the most promising of them. In this rapidly advancing area, significant progress in creating new technologies for hydrogen fuel generation, transportation, storage, and consumption has been recently observed, while a fast-growing number of research papers and implemented commercial projects related to hydrogen makes it necessary to give their general review. In particular, the combination of the latest achievements in this area is of particular interest with a view to analyzing the possibility of creating hydrogen fuel supply chains. This paper presents an analytical review of existing methods of hydrogen production, storage, and transportation, including their key economic and energy-related characteristics, and proposes an approach to the creation, analysis, and optimization of hydrogen supply chains. A mathematical model has been developed to determine the cost of hydrogen, taking into account the supply chain, including production, transport and storage. Based on the results of modeling in the given scenario conditions for 2030, 2040 and 2050, promising hydrogen supply chains have been established. Under the various scenario conditions, hydrogen production by 2050 is most preferable by the method of steam conversion of methane with a cost of 8.85 USD/kg H2. However, due to the environmental effect, electrolysis also remains a promising technology with a cost of hydrogen produced of 17.84 USD/kg.

15 December 2022 in Energies
Verified
Journal Article
Open access
PDF file
NRNikolay Rogalev
Nikolay Rogalev
RARogalev Andrey
Rogalev Andrey
Vladimir KindraVladimir Kindra
Vladimir Kindra
VNVladimir Naumov
Vladimir Naumov
IMIgor Maksimov
Igor Maksimov
The daily non-uniform power demand is a serious problem in power industry. In addition, recent decades show a trend for the transition to renewable power sources, but their power output depends upon weather and daily conditions. These factors determine the urgency of energy accumulation technology research and development. The presence of a wide variety of energy storage mechanisms leads to the need for their classification and comparison as well as a consideration of possible options for their application in modern power units. This paper presents a comparative analysis of energy storage methods for energy systems and complexes. Recommendations are made on the choice of storage technologies for the modern energy industry. The change in the cost of supplied energy at power plants by integrating various energy storage systems is estimated and the technologies for their implementation are considered. It is revealed that in the large-scale power production industry, the most productive accumulation methods for energy systems and complexes are the following: pumped hydroelectric energy storage systems, thermal and thermochemical accumulations, and hydrogen systems. These methods have the best technical and economic characteristics. The resulting recommendations allow for the assessment of the economic and energy effect achieved by integration of storage systems at the stage of designing new power units.

18 December 2024 in Energies
Verified
Journal Article
Open access
PDF file
IMIgor Maksimov
Igor Maksimov
Vladimir KindraVladimir Kindra
Vladimir Kindra
AVAndrey Vegera
Andrey Vegera
RARogalev Andrey
Rogalev Andrey
NRNikolay Rogalev
Nikolay Rogalev
Improvement of energy efficiency in technological processes at industrial enterprises is one of the key areas of energy saving. Reduction of energy costs required for the production of energy-intensive products can be achieved through the utilization of waste heat produced by high-temperature thermal furnace units. Generation of electric power based on the waste heat using power cycles with working fluids that are not conventional for large power engineering, may become a promising energy saving trend. In this paper, thermodynamic analysis and optimization of power cycles for the purposes of waste heat recovery are performed. The efficiency of combining several power cycles was also evaluated. It has been established that the combination of the Brayton recompression cycle on supercritical carbon dioxide with the organic Rankine cycle using R124 allows for greater electrical power than steam-power cycles with three pressure circuits under conditions where the gas temperature is in the range of 300–550 °C and the cooling temperature of is up to 80 °C. Additionally, when cooling gases with a high sulfur and moisture content to 150 °C, the combined cycle has greater electrical power at gas temperatures of 330 °C and above. At enterprises where the coolant has a high content of sulfur compounds or moisture and deep cooling of gases will lead to condensation, for example, at petrochemical and non-ferrous metallurgy enterprises, the use of combined cycles can ensure a utilization efficiency of up to 45%.

29 March 2024 in Energies
Verified
Journal Article
Open access
PDF file
Vladimir KindraVladimir Kindra
Vladimir Kindra
IMIgor Maksimov
Igor Maksimov
OZOlga Zlyvko
Olga Zlyvko
RARogalev Andrey
Rogalev Andrey
NRNikolay Rogalev
Nikolay Rogalev
Small nuclear power plants can provide a stable, carbon-free energy supply to civil infrastructure and industrial enterprises in remote regions isolated from unified energy systems. More than 70 projects of small modular reactors are currently being developed by IAEA member countries; several low-power power units are already supplying thermal and electrical energy to consumers. One of the main limitations standing in the way of widespread dissemination of this technology is the high specific capital cost of a low-power nuclear power plant; therefore, new scientific and technical solutions are needed in this industry. Increasing the thermodynamic efficiency of power cycles of small modular reactors can become a driver for reducing the cost of supplied electrical energy. This paper presents the results of a comprehensive thermodynamic analysis of existing and promising power cycles for small modular reactors. In addition to traditional steam power cycles, cycles using non-traditional working fluids, including carbon dioxide, freons, and helium cycles, are considered. Optimal sets of thermodynamic parameters were determined to ensure maximum net efficiency of electricity production. For water-cooled reactor plants, a maximum efficiency of 33.5% at an initial temperature of 300 °C could be achieved using a steam turbine cycle. It was revealed that for reactor plants with liquid metal and liquid salt coolant in the range of initial temperatures above 550–700 °C, the maximum thermal efficiency was provided by the Brayton recompression cycle with a carbon dioxide coolant: the net electrical efficiency exceeded the level of steam turbine plants, with intermediate superheating of the steam, and could reach a value of 49.4% at 600 °C. This makes the use of these cycles promising for low-power nuclear power plants with a high initial temperature. In small gas-cooled reactor plants with a helium coolant, the use of a binary cycle consisting of a helium Brayton cycle and a steam-powered Rankine cycle provided an efficiency of 44.3% at an initial helium temperature of 700 °C and 52.9% at 1000 °C. This was higher than in the Brayton cycle with a recuperator, with a minimum temperature difference in the heat exchanger of 20 °C: the efficiency was 40.2% and 52%, respectively. Also, the transition to power cycles with non-traditional working fluids will lead to a change in the operating conditions of turbomachines and heat exchangers.

29 July 2022 in Inventions
Verified
Journal Article
Open access
PDF file
Vladimir KindraVladimir Kindra
Vladimir Kindra
IKIvan Komarov
Ivan Komarov
SOSergey Osipov
Sergey Osipov
OZOlga Zlyvko
Olga Zlyvko
IMIgor Maksimov
Igor Maksimov
The atmosphere carbon dioxide content grows subsequently due to anthropogenic factors. It may be considerably mitigated by the development of thermal power plants with near zero emissions. A promising way is the transition to the semi-closed oxy-fuel combustion power cycles with carbon dioxide and water vapor mixture as a working fluid. However, their wide implementation requires reduction of the metal consumption for the highly efficient regeneration system. This paper discloses the results of feasibility study for the regeneration system of the prospective oxy-fuel combustion power plant. The effect of operating parameters on the cycle energy efficiency, overall dimensions, and the cost of the regenerator was determined. Underheating increase in the regenerator by 1 °C leads to the net efficiency factor drop of the oxy-fuel combustion power cycle by 0.13% at average and increases fuel costs by 0.28%. Increase of pressure drop in the hot channel by 1% leads to efficiency drop by 0.14%. The optimum set of design and operating parameters of the feed heating system has been determined, which ensures the best technical and economic indicators of electrical power generation: the minimum cumulative costs are achieved when underheating in the regenerator is 20 °C and pressure drop in the hot channel is 4%, under the use of S-shaped fins channels.

4 May 2023 in Energies
Verified
Journal Article
Open access
PDF file
Vladimir KindraVladimir Kindra
Vladimir Kindra
IMIgor Maksimov
Igor Maksimov
IKIvan Komarov
Ivan Komarov
CXCheng Xu
Cheng Xu
Tuantuan XinTuantuan Xin
Tuantuan Xin
Natural gas-fired combined cycle plants are nowadays one of the most efficient and environmentally friendly energy complexes. High energy efficiency and low specific emissions are achieved primarily due to the high average integral temperature of heat supply in the Brayton–Rankine cycle. In this case, the main sources of energy losses are heat losses in the condenser of the steam turbine plant and heat losses with the exhaust gases of the waste heat boiler. This work is related to the analysis of the thermodynamic and economic effects in the transition from binary to trinary cycles, in which, in addition to the gas and steam–water cycles, there is an additional cycle with a low-boiling coolant. A method for the feasibility study of a waste heat recovery unit for trinary plants is proposed. The schematic and design solutions described will ensure the increased energy and economic performance of combined cycle power plants. Based on the results of the thermodynamic optimization of the structure and parameters of thermal schemes, it was found that the use of the organic Rankine cycle with R236ea freon for the utilization of the low-grade heat of a trinary plant’s exhaust gases operating from a GTE-160 gas turbine makes it possible to achieve a net electrical efficiency of 51.3%, which is a 0.4% higher efficiency for a double-circuit combined cycle gas turbine plant and a 2.1% higher efficiency for a single-circuit cycle with similar initial parameters. On the basis of the conducted feasibility study, the parameters and characteristics of the heat exchangers of the regenerative system of the waste heat recovery unit are substantiated. The use of plain fin-and-tube heat exchangers in the regenerative system of the utilization cycle is the most promising solution. It was found that the level of allowable pressure loss in the regenerator of 10 kPa and the degree of regeneration of 80% allow for maximum economic efficiency of the waste heat recovery unit.