The 1st EuNetAir Air Quality Joint Intercomparison Exercise organized in Aveiro (Portugal) from 13th–27th October 2014, focused on the evaluation and assessment of environmental gas, particulate matter (PM) and meteorological microsensors, versus standard air quality reference methods through an experimental urban air quality monitoring campaign. The IDAD-Institute of Environment and Development Air Quality Mobile Laboratory was placed at an urban traffic location in the city centre of Aveiro to conduct continuous measurements with standard equipment and reference analysers for CO, NOx, O3, SO2, PM10, PM2.5, temperature, humidity, wind speed and direction, solar radiation and precipitation.The comparison of the sensor data generated by different microsensor-systems installed side-by-side with reference analysers, contributes to the assessment of the performance and the accuracy of microsensor-systems in a real-world context, and supports their calibration and further development.The overall performance of the sensors in terms of their statistical metrics and measurement profile indicates significant differences in the results depending on the platform and on the sensors considered. In terms of pollutants, some promising results were observed for O3 (r2: 0.12–0.77), CO (r2: 0.53–0.87), and NO2 (r2: 0.02–0.89). For PM (r2: 0.07–0.36) and SO2 (r2: 0.09–0.20) the results show a poor performance with low correlation coefficients between the reference and microsensor measurements. These field observations under specific environmental conditions suggest that the relevant microsensor platforms, if supported by the proper post processing and data modelling tools, have enormous potential for new strategies in air quality control

This study addressed the development of a pilot plant for pyrolysis of scrap tires to obtain carbon black and other byproducts. The work was motivated by the goal of contributing to the development and dissemination of knowledge about existing technologies that allow modern economies to transform waste into valuable products, by documenting and discussing an empirical application in Brazil. Thispaper describes the development of a market for steel scrap, pyrolytic oil and carbon black products obtained from a vacuum pyrolysis process. The research work was conducted in Brazil, and was guided by the twofold purpose of reducing the environmental impacts, while gaining economical sustainability. Modern economies increasingly need to devise strategies to address energy generation while preserving natural ecosystems. These strategies include leveraging the use of renewable energy sources. Acknowledging that scrap tires hold an enormous potential as a sustainable energy option, this study aimed to contribute to the development and maturity of eco-friendly processing approaches to realize its full potential. The work involved a preliminary phase concerned with the operation of vacuum pyrolysis of scrap tires at a laboratorial scale, followed by the design of the pilot plant that operated for 10 years, at the time of the study, with a 100 kg/h batch flow. Results show that the yield of the pyrolysis process was 41% pyrolytic oil, 38% carbon black, 12% gas, and 8.9% steel scrap, with a calorific value of 36 MJ/kg per tire. The carbon black was composed of 90% carbon, and the pyrolytic oil was composed of 66% gasoline and 33% other oils, which have higher quality and can be commercialized with a potential profit over 3 million dollars/year.

This article addresses the evolution of Industry 4.0 (I4.0) in the automotive industry, exploring its contribution to a shift in the maintenance paradigm. To this end, we firstly present the concepts of predictive maintenance (PdM), condition-based maintenance (CBM), and their applications to increase awareness of why and how these concepts are revolutionizing the automotive industry. Then, we introduce the business process management (BPM) and business process model and notation (BPMN) methodologies, as well as their relationship with maintenance. Finally, we present the case study of the Renault Cacia, which is developing and implementing the concepts mentioned above.