This article presents the experimental results for a multiple-input operational transconductance amplifier (MI-OTA). To achieve extended linearity under 0.5-V low voltage supply, the circuit employs three linearization techniques: the bulk-driven (BD), the source degeneration, and the input voltage attenuation created by the MI metal-oxide-semiconductor transistor technique (MI-MOST). Although the linearization techniques result in reduced dc gain, the self-cascode transistors are used to boost the gain of the MI-OTA. Furthermore, the MI-MOST simplifies the internal structure of the OTA and may reduce the complexity of the applications. The MI-OTA operates in the subthreshold region and offers tunability by a bias current in the nanoampere range. The circuit is capable to work with 0.5-V supply voltage while consuming 24.77 nW. The circuit was fabricated using the 0.18- $\mu \text{m}$ Taiwan Semiconductor Manufacturing Company (TSMC) CMOS technology and it occupies a 0.01153-mm2 silicon area. Intensive simulation and experimental results confirm the benefits and robustness of the design.
10 December 2014 in Analog Integrated Circuits and Signal Processing
This article presents a low-voltage high-transconductance input differential pair for bulk-driven amplifiers. The proposed structure employs two bulk-driven flipped voltage follower (FVF) cells as nonlinear tail current sources to enhance the slewing behavior. This method also increases the transconductance of the proposed amplifier two times against the conventional one. The enhanced topology is merged with a conventional bulk-driven input differential pair using cross-coupled connections to significantly increase the transconductance. These circuitry ideas lead to an improvement in the amplifier's specifications, such as dc gain, slew rate (SR), and input noise without any degeneration in other parameters. Moreover, thanks to the use of the bulk terminals as the input nodes and also a simple common-source structure as the second stage, rail-to-rail input, and output swings are achieved, respectively. The proposed amplifier was fabricated in TSMC 0.18- μm CMOS technology. Under a supply voltage of 0.5 V, the measurement results show that the proposed amplifier achieves a dc gain of 78 dB, a gain bandwidth of 7.5 kHz, and an SR of 8.6 V/ms with just 91-nA current dissipation.