The present paper explores the combination of unmanned aerial vehicle (UAV) photogrammetry and three-dimensional geomechanical modeling in the investigation of instability processes of long sectors of coastal rocky cliffs. The need of a reliable and detailed reconstruction of the geometry of the cliff surfaces, beside the geomechanical characterization of the rock materials, could represent a very challenging requirement for sub-vertical coastal cliffs overlooking the sea. Very often, no information could be acquired by alternative surveying methodologies, due to the absence of vantage points, and the fieldwork could pose a risk for personnel. The case study is represented by a 600 m long sea cliff located at Sant’Andrea (Melendugno, Apulia, Italy). The cliff is characterized by a very complex geometrical setting, with a suggestive alternation of 10 to 20 m high vertical walls, with frequent caves, arches and rock-stacks. Initially, the rocky cliff surface was reconstructed at very fine spatial resolution from the combination of nadir and oblique images acquired by unmanned aerial vehicles. Successively, a limited area has been selected for further investigation. In particular, data refinement/decimation procedure has been assessed to find a convenient three-dimensional model to be used in the finite element geomechanical modeling without loss of information on the surface complexity. Finally, to test integrated procedure, the potential modes of failure of such sector of the investigated cliff were achieved. Results indicate that the most likely failure mechanism along the sea cliff examined is represented by the possible propagation of shear fractures or tensile failures along concave cliff portions or over-hanging due to previous collapses or erosion of the underlying rock volumes. The proposed approach to the investigation of coastal cliff stability has proven to be a possible and flexible tool in the rapid and highly-automated investigation of hazards to slope failure in coastal areas.
1 July 2018 in International Journal of Geomechanics
The stability of shallow, artificial underground cavities in soft rocks interacting with overlying structures and infrastructures represents a challenging problem to be faced. This paper discusses a methodology that can be useful for a preliminary stability assessment of underground cavities in soft calcarenites based upon the results of parametric two-dimensional (2D) and three-dimensional (3D) finite-element analyses of ideal underground cavities. The study aimed at exploring those relationships between the geometrical parameters of the cave system and the strength properties of the rock material to define charts that can be useful to evaluate the stability of the rock mass. Moreover, the influence of three-dimensionality was also accounted for based on 3D parametric analyses with variable cavity length and the comparison with the results of the corresponding 2D analyses.
1 January 2021 in Geomatics, Natural Hazards and Risk
The evolution of soft rock coastlines is strictly related to natural and anthropogenic conditions, which in some cases can determine also an acceleration of coastal retreat. The recent evolution of a soft rocky coastal stretch on the Italian southern Adriatic sector is analysed. To investigate the most important contributing factors to coastal evolution, a detailed multi-temporal (1954–2017) morphological analysis with photo-interpretation is carried out, which allows gaining a general understanding of the cliff evolution. The coastal retreat was then evaluated by exploiting the Digital Shoreline Analysis System (DSAS) tool. From that, site-specific analyses are carried out to explore the role of four environmental factors: rock mechanical properties, geostructural setup of the rock mass along the coast, emerged rock platform at the toe, and the storm waves. Analyses highlighted how the most significant retreat is detected along cliff segments characterized by the presence of low strength rocks susceptible to water-induced weakening, moderate fracturing degree of the rock mass, absence of the emerged platform at the toe, and wave storms. This work shows how a multi-scale methodology could represent an efficient approach to gain an interpretation of the instability processes and thus prepare risk mitigation plans and land management strategies.
1 October 2019 in Natural Hazards and Earth System Sciences
The stability of man-made underground cavities in soft rocks interacting with overlying structures and infrastructures represents a challenging problem to be faced. Based upon the results of a large number of parametric two-dimensional (2-D) finite-element analyses of ideal cases of underground cavities, accounting for the variability both cave geometrical features and rock mechanical properties, specific charts have been recently proposed in the literature to assess at a preliminary stage the stability of the cavities. The purpose of the present paper is to validate the efficacy of the stability charts through the application to several case studies of underground cavities, considering both quarries collapsed in the past and quarries still stable. The stability graphs proposed by Perrotti et al. (2018) can be useful to evaluate, in a preliminary way, a safety margin for cavities that have not reached failure and to detect indications of predisposition to local or general instability phenomena. Alternatively, for sinkholes that already occurred, the graphs may be useful in identifying the conditions that led to the collapse, highlighting the importance of some structural elements (as pillars and internal walls) on the overall stability of the quarry system.
Multi-temporal UAV and digital photo surveys have been acquired between 2017 and 2020 on a coastal cliff in soft rocks in South-Eastern Italy for hazard assessment and the corresponding point clouds have been processed and compared. The multi-temporal survey results provide indications of a progressive deepening process of erosion and detachment of blocks from the mid-height portion of the cliff, with the upper stiffer rock stratum working provisionally as a shelf against the risk of general collapse. Based on the DEM model obtained, a three-dimensional geomechanical finite element model has been created and analyzed in order to investigate the general stability of the cliff and to detect the rock portions which are more susceptible to failure. Concerning the evolving erosion process, active in the cliff, the photogrammetric analyses and the modeling simulations result in agreement and a proneness to both local and general instabilities has been achieved.