Nikolay Sergeevich Dombrovskiy

Mr. Nikolay Sergeevich Dombrovskiy

School of Non-Ferrous Metals, Krasnoyarsk, Krasnoyarskiy Kray, Russia
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 April 2025 in Metals
Verified
Journal Article
Open access
PDF file
BKBoris Kulikov
Boris Kulikov
Evgenii PartykoEvgenii Partyko
Evgenii Partyko
Aleksandr KosovichAleksandr Kosovich
Aleksandr Kosovich
PYPavel Yuryev
Pavel Yuryev
YMYulbarskhon Mansurov
Yulbarskhon Mansurov
MBMaksim Baranov
Maksim Baranov
One of the key problems in the billet and shaped casting of aluminum alloys is the presence of various undesirable inclusions and impurities in the melt, which can serve as stress concentrators in the finished product, as well as dissolved hydrogen, which contributes to the formation of porosity. The interaction of aluminum with other gases produced by the combustion of fuel particles, oil, and paint materials brought into the furnace together with charge and scrap increases the amount of nitrides, oxides, carbides, and sulfides in the melt. Flux treatment is widely used as protection of aluminum alloys from oxidation and removal of impurities. The present paper reports the data of a comparative analysis of five widely used flux compositions based on sodium, potassium, and magnesium chlorides. The study covers the following aspects: chemical composition, moisture content, melting temperature and melting range, particle size distribution, and refining ability as measured by the change in Na, Ca, and H2 content after melt treatment.


4 March 2026 in Recycling
Verified
Journal Article
Open access
PDF file
BKBoris Kulikov
Boris Kulikov
NDNikolay Sergeevich Dombrovskiy
Nikolay Sergeevich Dombrovskiy
Aleksandr KosovichAleksandr Kosovich
Aleksandr Kosovich
Evgenii PartykoEvgenii Partyko
Evgenii Partyko
YMYulbarskhon Mansurov
Yulbarskhon Mansurov
MBMaksim Baranov
Maksim Baranov
The depletion of natural resources remains an acute global problem, highlighting the importance of developing sustainable technologies that enable the simultaneous extraction of metals and recycling of waste. This paper describes a study of a technology for recycling aluminum slag from foundries to produce secondary aluminum alloy and regenerated flux. Research and processing methods include X-ray phase and spectral analysis of slag composition, multi-stage grinding in a jaw crusher and planetary mill, screening for fraction separation, and selective dissolution of the oxide–salt phase in water or hydrochloric acid followed by filtration and evaporation; obtaining regenerated flux based on phase diagrams of chloride systems; and briquetting and remelting of the extracted aluminum. The technology ensures the extraction of up to 85% of the metallic aluminum from slag and the production of regenerated flux based on the NaCl–KCl–MgCl2 system with a low melting point.

1 March 2025 in Metallurgist
Verified
Journal Article
Closed access
PDF file
ABA. I. Bezrukikh
A. I. Bezrukikh
BKB. P. Kulikov
B. P. Kulikov
PYPavel Yuryev
Pavel Yuryev
VBV. N. Baranov
V. N. Baranov
VFV. F. Frolov
V. F. Frolov
NDNikolay Sergeevich Dombrovskiy
Nikolay Sergeevich Dombrovskiy

31 May 2024 in Tsvetnye Metally
Verified
Journal Article
Closed access
ABA. I. Bezrukikh
A. I. Bezrukikh
IKI. L. Konstantinov
I. L. Konstantinov
VMV. A. Matyushentsev
V. A. Matyushentsev
NDNikolay Sergeevich Dombrovskiy
Nikolay Sergeevich Dombrovskiy
Studies on efficiency of applying SATA-GF-M15, SCOT-MAG fluxes and RI-Flux to clean aluminum alloy 5052 from hydrogen, sodium and calcium were carried out in production at a Russian metallurgical plant. Molten metal preparation and subsequent semi-continuous casting of the alloy were carried out in compliance with the industrial regulatory documentation, using the HD-2000 (SNIF®) refining system, the Mitsui final metal refining chamber (cartridge type is Rc) and a filtration chamber with two parallel installed ceramic foam filters with a density of 50 ppi. Large-size slabs, 560×1310 mm in size, were cast with the Combo-Bag molten metal distributor, and modified with delivering AlTi5B1alloy rods to entry and exit openings of the Mitsui final metal refining chamber. The alloy flow rate is 1kg/t. Every flux was used in three heats, whose results were statistically processed. The experiments carried out on the Wagstaff continuous casting facility resulted in developing technical solutions applied for efficient refining of the molten alloy under study from hydrogen, calcium and sodium during semi-continuous casting of large-size slabs used for rolling. SCOT-MAG was found to be the most efficient refining flux agent among the fluxes under study to decrease impurities of hydrogen, sodium and calcium in molten metal, and PoDFA has showed that purity of the alloy corresponds to the technical specification. Therefore, the use of this flux is considered to be preferable for refining alloy 5052 and recommended for testing to determine feasibility of its application for other aluminum alloys of 5ххх series. The research was conducted by the Laboratory of Low-Carbon Metallurgy and Power Engineering as part of the state assignment to Siberian Federal University, a participant of Research and Educational Center Yenisei Siberia, as part of the national project “Science and universities”, project No. FSRZ-2024-0004.