The goal of this study is to describe a design architecture for a self-powered IoT (Internet of Things) sensor network that is currently being deployed at various locations throughout the Dallas-Fort Worth metroplex to measure and report on Particulate Matter (PM) concentrations. This system leverages diverse low-cost PM sensors, enhanced by machine learning for sensor calibration, with LoRaWAN connectivity for long-range data transmission. Sensors are GPS-enabled, allowing precise geospatial mapping of collected data, which can be integrated with urban air quality forecasting models and operational forecasting systems. To achieve energy self-sufficiency, the system uses a small-scale solar-powered solution, allowing it to operate independently from the grid, making it both cost-effective and suitable for remote locations. This novel approach leverages multiple operational modes based on power availability to optimize energy efficiency and prevent downtime. By dynamically adjusting system behavior according to power conditions, it ensures continuous operation while conserving energy during periods of reduced supply. This innovative strategy significantly enhances performance and resource management, improving system reliability and sustainability. This IoT network provides localized real-time air quality data, which has significant public health benefits, especially for vulnerable populations in densely populated urban environments. The project demonstrates the synergy between IoT sensor data, machine learning-enhanced calibration, and forecasting methods, contributing to scientific understanding of microenvironments, human exposure, and public health impacts of urban air quality. In addition, this study emphasizes open source design principles, promoting transparency, data quality, and reproducibility by exploring cost-effective sensor calibration techniques and adhering to open data standards. The next iteration of the sensors will include edge processing for short-term air quality forecasts. This work underscores the transformative role of low-cost sensor networks in urban air quality monitoring, advancing equitable policy development and empowering communities to address pollution challenges.
Accurate characterization of surface solar irradiance at fine spatial, temporal, and spectral resolution is central to applications such as solar energy and environmental monitoring. On the one hand, modeling radiative transfer to achieve such accuracy requires detailed characterization of a wide range of factors, including the vertical profiles of gaseous and particulate absorbers and scatterers, wavelength-resolved surface reflectivity, and the three-dimensional morphology of clouds. On the other hand, satellite-based remote sensing products typically provide top-of-the-atmosphere irradiance at coarse spatial resolutions, where individual pixels can span several kilometers, failing to capture fine-scale intra-pixel variability. In this study, we introduce a machine learning framework that integrates large-scale remote sensing satellite data with hyperlocal, second-by-second ground-based measurements from an ensemble of low-cost spectral sensors to estimate the wavelength-resolved surface solar irradiance spectra at the hyperlocal level. The satellite data are obtained from the Harmonized Sentinel-2 MSI (MultiSpectral Instrument), Level-2A Surface Reflectance (SR) product, which offers high-resolution surface reflectance data. By leveraging machine learning, we model the relationship between satellite-derived surface reflectance and ground-based spectral measurements to predict high-resolution, wavelength-resolved irradiance, using target data obtained from an NIST-calibrated reference instrument. By utilizing a low-cost sensor ensemble that is easily deployable at scale, combined with downscaled satellite data, this approach enables accurate modeling of intra-pixel variability in surface-level solar irradiance with high temporal resolution. It also enhances the utility of the Harmonized Sentinel-2 MSI data for operational remote sensing. Our results demonstrate that the model is able to estimate surface solar irradiance with an R2 ≈ 0.99 across all 421 spectral bins from 360 nm to 780 nm at 1 nm resolution, offering strong potential for applications in solar energy forecasting, urban climate research, and environmental monitoring.
This study aims to determine the optimal frequency for monitoring airborne pollutants in densely populated urban areas to effectively capture their temporal variations. While environmental organizations worldwide typically update air quality data hourly, there is no global consensus on the ideal monitoring frequency to adequately resolve pollutant (particulate matter) time series. By applying temporal variogram analysis to particulate matter (PM) data over time, we identified specific measurement intervals that accurately reflect fluctuations in pollution levels. Using January 2023 air quality data from the Joppa neighborhood of Dallas, Texas, USA, temporal variogram analysis was conducted on three distinct days with varying (particulate matter of size ≤ in diameter) pollution levels. For the most polluted day, the optimal sampling interval for was determined to be 12.25 s. This analysis shows that highly polluted days are associated with shorter sampling intervals, highlighting the need for highly granular observations to accurately capture variations in PM levels. Using the variogram analysis results from the most polluted day, we trained machine learning models that can predict the sampling time using meteorological parameters. Feature importance analysis revealed that humidity, temperature, and wind speed could significantly impact the measurement time for . The study also extends to the other size fractions measured by the air quality monitor. Our findings highlight how local conditions influence the frequency required to reliably track changes in air quality.
This study aims to determine the optimal frequency for monitoring airborne pollutants in densely populated urban areas to effectively capture their temporal variations. While environmental organizations worldwide typically update air quality data hourly, there is no global consensus on the ideal monitoring frequency to adequately resolve pollutant (Particulate Matter) time series. By applying temporal variogram analysis to particulate matter (PM) data over time, we identified specific measurement intervals that accurately reflect fluctuations in pollution levels. Using January 2023 air quality data from the Joppa neighborhood of Dallas, TX, Temporal Variogram analysis was conducted on three distinct days with varying PM2.5 pollution levels. For the most polluted day, the optimal sampling interval for PM2.5 was determined to be 12.25 seconds. This analysis shows that highly polluted days are associated with shorter sampling intervals, highlighting the need for highly granular observations to accurately capture variations in PM levels. Using the variogram analysis results from the most polluted day, we trained Machine Learning models that can predict the sampling time using meteorological parameters. Feature importance analysis revealed that humidity, temperature and wind speed could significantly impact the measurement time for PM2.5. The study also extends to the other size fractions measured by the air quality monitor. Our findings highlight how local conditions influence the frequency required to reliably track changes in air quality.
The goal of this study is to describe a design architecture for a self-powered IoT (Internet of Things) sensor network that is currently being deployed at various locations throughout the Dallas-Fort Worth metroplex to measure and report on Particulate Matter (PM) concentrations. This system leverages diverse low-cost PM sensors, enhanced by machine learning for sensor calibration, with LoRaWAN connectivity for long-range data transmission. Sensors are GPS-enabled, allowing precise geospatial mapping of collected data, which can be integrated with urban air quality forecasting models and operational forecasting systems. To achieve energy self-sufficiency, the system uses a small-scale solar-powered solution, allowing it to operate independently from the grid, making it both cost-effective and suitable for remote locations. This novel approach leverages multiple operational modes based on power availability to optimize energy efficiency and prevent downtime. By dynamically adjusting system behavior according to power conditions, it ensures continuous operation while conserving energy during periods of reduced supply. This innovative strategy significantly enhances performance and resource management, improving system reliability and sustainability. This IoT network provides localized real-time air quality data, which has significant public health benefits, especially for vulnerable populations in densely populated urban environments. The project demonstrates the synergy between IoT sensor data, machine learning-enhanced calibration, and forecasting methods, contributing to scientific understanding of microenvironments, human exposure, and public health impacts of urban air quality. In addition, this study emphasizes open source design principles, promoting transparency, data quality, and reproducibility by exploring cost-effective sensor calibration techniques and adhering to open data standards. The next iteration of the sensors will include edge processing for short-term air quality forecasts.