Syed Ahmad Farhan

Dr. Syed Ahmad Farhan

Nextgen Carbon Solutions, Inc., Houston, Texas, USA
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
Siti Nooriza Abd RazakSiti Nooriza Abd Razak
Siti Nooriza Abd Razak
Nasir ShafiqNasir Shafiq
Nasir Shafiq
LGLaurent Guillaumat
Laurent Guillaumat
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
Vicky KumarVicky Kumar
Vicky Kumar
Geopolymer concrete possesses superior fire resistance compared to ordinary Portland cement (OPC)-based concrete; however, there are concerns regarding its vulnerability when exposed to real fire events. In the present study, the fire resistance of fly-ash-based geopolymer concrete was evaluated relative to that of OPC-based concrete. Concrete specimens of standard strength grades of 20, 40, and 60 MPa were exposed to fire at 500 and 1200 °C for 2 h to simulate real fire events. Visual observation was performed, mass loss and residual compressive strength were measured, and scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) analyses were conducted. OPC-based concrete suffered major cracks accompanied with spalling for the high-strength specimen, while geopolymer concrete experienced minor cracks with no spalling. Mass losses of the geopolymer concrete—of 1.69% and 4%, after the exposure to fire at 500 and 1200 °C, respectively—were lower than those of the OPC-based concrete. More than 50% of the residual compressive strength for low- and medium-strength geopolymer concrete, after the exposure to fire at 1200 °C, was maintained. After the exposure to fire at 500 °C, the residual compressive strength of the geopolymer concrete increased from 13 to 45%, while the OPC-based concrete was not able to sustain its compressive strength. SEM images showed that the matrix of the geopolymer concrete, after the exposure to fire, was denser than that of the OPC-based concrete, while the FTIR spectra of the geopolymer concrete showed a minor shift in wavelength. Hence, our findings indicate that fly-ash-based geopolymer concrete has an excellent fire resistance as compared to OPC-based concrete.

6 June 2014 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
SGSyed Shujaa Safdar Gardezi
Syed Shujaa Safdar Gardezi
Nasir ShafiqNasir Shafiq
Nasir Shafiq
MNMuhd Fadhil Nuruddin
Muhd Fadhil Nuruddin
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
UUUsman Aminu Umar
Usman Aminu Umar
The construction industry of Malaysia is very dynamic in nature and the adoption of new technological advancements and construction methods has been a prime concerns for its key players and stakeholders. However, the adoption of BIM in such a dynamic industry is observed to be limited and its implementation has not been as successful as it should have been. The study focuses on the identification and prioritization the factors challenging the implementation of BIM in Malaysian construction industry. The data has been administrated through designed questionnaire by identifying the factors / barriers, by literature review, for implementation of BIM in construction industry. The prioritization of such factors is expected to help the major stake holders to address the issues according to their priority which will save lot of previous time and financial with smooth implementation of BIM in Architecture, Engineering and Construction (AEC) industry in future project.

1 April 2016 in Habitat International
Verified
Journal Article
Closed access
SGSyed Shujaa Safdar Gardezi
Syed Shujaa Safdar Gardezi
Nasir ShafiqNasir Shafiq
Nasir Shafiq
Noor Amila ZawawiNoor Amila Zawawi
Noor Amila Zawawi
MKM. Faris Khamidi
M. Faris Khamidi
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan

30 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
Nasir ShafiqNasir Shafiq
Nasir Shafiq
Nadzhratul HusnaNadzhratul Husna
Nadzhratul Husna
MSMuhammad Taufiq Sharif
Muhammad Taufiq Sharif
AVArul Kamal Veerasenan
Arul Kamal Veerasenan
Silica aerogel possesses an ultra-low thermal conductivity by virtue of its nano-structure. Owing to the fragility of monolithic aerogel, the development and production of aerogel-based insulation materials involve the incorporation of granular aerogel with other materials to form composite materials. In the present study, the application of silica-aerogel-incorporated composite cement paste as render on the roof-top surface is coupled with the installation of a novel silica-aerogel-incorporated composite insulation board below the roof tiles. Control and silica-aerogel-incorporated samples of the composite cement paste and insulation were prepared. Thermal conductivity and strength tests were performed on the samples. A simulation study was performed on a Building Information Model subjected to a tropical climate to project the resultant impact of the cement render coupled with the insulation board on the thermal-energy-efficiency of the roof. For optimization of thermal and strength performances, silica aerogel contents of 4 wt.% and 3 wt.% were selected for the cement render and insulation board, respectively. The projected annual cooling load and energy savings revealed that the application of a 20-mm cement render, coupled with the installation of a 100-mm thick insulation board, is recommended as the optimum roof configuration.

22 April 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
OKOsamah Kiwan
Osamah Kiwan
Nasir ShafiqNasir Shafiq
Nasir Shafiq
AZAzni Zain-Ahmed
Azni Zain-Ahmed
AHAfif Izwan Abd Hamid
Afif Izwan Abd Hamid
Modern residential roofs in Malaysia mainly employ red and brown roof tiles due to aesthetic factors and the ability of the roof surface to reflect or retard heat transfer is typically not considered the main priority. The present article reveals the findings of a study on the effect of roof tile colour on heat conduction transfer through roof tiles and ceiling boards, roof-top surface temperature and cooling load. Findings suggest that the selection of white roof tiles significantly reduces the peaks of heat conduction transfer and roof-top surface temperature as well as the values of heat conduction transfer and roof-top surface temperature throughout diurnal profiles, which consequently reduces hours of indoor thermal discomfort and use of air-conditioners in indoor spaces. A decline in peak roof-top surface temperature of up to 16.00 °C that results in annual energy savings of up to 13.14% can be achieved when the roof tile colour is changed from red to white. Further research on the development of solar-reflective paint or coating products that can significantly increase the solar reflectance values of non-white roof tiles are essential to overcome issues related to maintenance difficulties and lack of preference among house buyers towards white roof tiles.

15 June 2015 in Research Journal of Applied Sciences, Engineering and Technology
Verified
Journal Article
Open access
UUUsman Aminu Umar
Usman Aminu Umar
Nasir ShafiqNasir Shafiq
Nasir Shafiq
AMAmirhossein Malakahmad
Amirhossein Malakahmad
MNMuhd Fadhil Nuruddin
Muhd Fadhil Nuruddin
MKMohd Faris Khamidi
Mohd Faris Khamidi
SGSyed Shujaa Safdar Gardezi
Syed Shujaa Safdar Gardezi
As project delivery approaches that are supported by Building Information Modelling (BIM) are continuously acknowledged throughout the Architecture, Engineering and Construction (AEC) industry, an innovative modelling approach called 4D BIM is starting to develop, which associates elements of 3D BIM with time and scheduling information. Traditional construction planning applications like bar charts and network diagrams fail to present and communicate the spatial and temporal or 4D components of construction schedules efficiently. As a result, they do not permit project managers to produce scheduling alternatives quickly to obtain the finest solution to develop a particular design. With 4D modelling, the whole period of a sequence of activities that is executed by those involved in the project can be presented visually. With the rising interest in BIM and the wider use of this and other technological innovations in the AEC industry, 4D BIM tools, which has been broadly employed, is becoming increasingly recognized among fundamental technological fields under BIM. This study aims to highlight and review numerous impacts of 4D applications on Integrated Project Delivery (IPD) on the AEC industry and suggest the ideal strategy to optimize the tools for rapid project delivery.