Fouad Ismail Ismail

Mr. Fouad Ismail Ismail

Department of Civil and Environmental Engineering, Universiti Teknologi Petronas, Ipoh, Perak, Malaysia
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
Yassir AbbasYassir Abbas
Yassir Abbas
Nasir ShafiqNasir Shafiq
Nasir Shafiq
Galal FaresGalal Fares
Galal Fares
Montasir Osman Ahmed AliMontasir Osman Ahmed Ali
Montasir Osman Ahmed Ali
MKMohammad Iqbal Khan
Mohammad Iqbal Khan
Efficient load transmission between concrete and steel reinforcement by bonding action is a key factor in the process of the design procedure of bar-reinforced concrete structures. To enhance the bond strength of steel/concrete composites, the impact of graphene nanoplatelets (GnP) on the bond stress and bond stress–slip response of deformed reinforcement bars, embedded in high-performance concrete (HPC), was investigated using bar pullout tests. In the current study, 36 samples were produced and examined. The main variables were the percentages of GnP, the steel reinforcement bar diameter, and embedded length. Bond behavior, failure mode, and bond stress-slip response were studied. Based on the experimental findings, the inclusion of GnP had a significant favorable influence on the bar-matrix interactions due to the bridging action of GnP as a nano reinforcement. For 0.02 wt.% of GnP, the bond strength was enhanced by more than 41.28% and 53.90% for steel bar diameters of 10 and 16 mm, respectively. The HPC-GnP mixture displayed a reduction in the initial slippage in comparison to the control sample. The test findings were compared to the prediction models created by other researchers and the ACI 408R-12 code.

30 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
Nasir ShafiqNasir Shafiq
Nasir Shafiq
Nadzhratul HusnaNadzhratul Husna
Nadzhratul Husna
MSMuhammad Taufiq Sharif
Muhammad Taufiq Sharif
AVArul Kamal Veerasenan
Arul Kamal Veerasenan
Silica aerogel possesses an ultra-low thermal conductivity by virtue of its nano-structure. Owing to the fragility of monolithic aerogel, the development and production of aerogel-based insulation materials involve the incorporation of granular aerogel with other materials to form composite materials. In the present study, the application of silica-aerogel-incorporated composite cement paste as render on the roof-top surface is coupled with the installation of a novel silica-aerogel-incorporated composite insulation board below the roof tiles. Control and silica-aerogel-incorporated samples of the composite cement paste and insulation were prepared. Thermal conductivity and strength tests were performed on the samples. A simulation study was performed on a Building Information Model subjected to a tropical climate to project the resultant impact of the cement render coupled with the insulation board on the thermal-energy-efficiency of the roof. For optimization of thermal and strength performances, silica aerogel contents of 4 wt.% and 3 wt.% were selected for the cement render and insulation board, respectively. The projected annual cooling load and energy savings revealed that the application of a 20-mm cement render, coupled with the installation of a 100-mm thick insulation board, is recommended as the optimum roof configuration.

22 April 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
OKOsamah Kiwan
Osamah Kiwan
Nasir ShafiqNasir Shafiq
Nasir Shafiq
AZAzni Zain-Ahmed
Azni Zain-Ahmed
AHAfif Izwan Abd Hamid
Afif Izwan Abd Hamid
Modern residential roofs in Malaysia mainly employ red and brown roof tiles due to aesthetic factors and the ability of the roof surface to reflect or retard heat transfer is typically not considered the main priority. The present article reveals the findings of a study on the effect of roof tile colour on heat conduction transfer through roof tiles and ceiling boards, roof-top surface temperature and cooling load. Findings suggest that the selection of white roof tiles significantly reduces the peaks of heat conduction transfer and roof-top surface temperature as well as the values of heat conduction transfer and roof-top surface temperature throughout diurnal profiles, which consequently reduces hours of indoor thermal discomfort and use of air-conditioners in indoor spaces. A decline in peak roof-top surface temperature of up to 16.00 °C that results in annual energy savings of up to 13.14% can be achieved when the roof tile colour is changed from red to white. Further research on the development of solar-reflective paint or coating products that can significantly increase the solar reflectance values of non-white roof tiles are essential to overcome issues related to maintenance difficulties and lack of preference among house buyers towards white roof tiles.

28 August 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MZMUHAMMAD ZAHID
MUHAMMAD ZAHID
Yassir AbbasYassir Abbas
Yassir Abbas
Nasir ShafiqNasir Shafiq
Nasir Shafiq
MKMohammad Iqbal Khan
Mohammad Iqbal Khan
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
Effective waste management is a matter of global concern. The utilization of widely recognized waste materials, such as plastics, rubber, and glass, in the construction industry is being investigated for their cost efficiency, enhanced material properties, and reduced environmental impact, contributing to broader sustainability efforts. This study investigates the development of an engineered geopolymer composite with a focus on sustainability by utilizing industrial waste materials. Gamma-irradiated polyethylene terephthalate was employed as a partial replacement for silica sand, while graphene nanoplatelets were incorporated to enhance composite properties and reduce environmental waste. A statistical technique known as response surface methodology was used to optimize the effects of gamma-irradiated polyethylene terephthalate and graphene nanoplatelets on the properties of the engineered geopolymer composite. Key findings indicate that gamma-irradiated polyethylene terephthalate, with higher crystallinity and robust interfacial bonding with the geopolymer matrix, significantly enhances compressive strength, elastic modulus, flexural strength, and flexural toughness. However, graphene nanoplatelets, while improving mechanical properties, reduce the ductility index. Optimal composite properties were achieved with 26.4% gamma-irradiated polyethylene terephthalate and 0.12% graphene nanoplatelets. This research underscores the potential of gamma-irradiated polyethylene terephthalate in creating high-performance, sustainable construction materials and highlights the trade-offs between mechanical reinforcement and ductility. Future research should explore the chain scission effects of gamma irradiation on polyethylene terephthalate, further optimize composite properties, and investigate mechanisms to enhance ductility, advancing the utilization of polyethylene terephthalate in sustainable construction materials.

27 July 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
MMMiras Mamirov
Miras Mamirov
Seunghee KimSeunghee Kim
Seunghee Kim
Jiong HuJiong Hu
Jiong Hu
Recent studies have demonstrated that the carbonation treatment of recycled concrete aggregate (RCA) could enhance its properties by the conversion of adhesive paste to stronger and denser products. In addition, the use of RCA and the sequestration of CO 2 during the CO 2 -treatment process can help to reduce the carbon footprint of concrete. This study assesses the performance of recycled aggregate concrete (RAC) developed from CO 2 -treated RCA. RCAs obtained from over 20 old highway and airfield pavements were treated under different pressures (5, 10, 20, 40, and 60 pounds per square inch [psi]) of CO 2 . The physical and mechanical properties of RCA were then examined. The complete substitution of natural coarse aggregate was carried out using both untreated and treated RCA, followed by an assessment of the resulting RAC’s fresh, mechanical, and durability properties. Furthermore, the environmental performance of concrete incorporating untreated and treated RCA was evaluated. The experimental findings revealed that the CO 2 treatment pressure had a significant influence on RCA characteristics, leading to notable improvements in the mechanical and durability properties of RAC. Results demonstrated that by employing CO 2 treatment at pressures of 20, 40, and 60 psi, concrete incorporating complete RCA replacement can achieve properties comparable to concrete with natural aggregate. Moreover, the RAC produced using CO 2 -treated RCA demonstrated a reduced CO 2 equivalent when compared with concrete incorporating natural aggregate or untreated RCA. These findings underscore the potential of CO 2 -treated RCA as a viable and environmentally friendly alternative to natural aggregate for sustainable concrete production.

27 October 2023 in Construction Technologies and Architecture
Verified
Conference Paper
Closed access
PDF file
Fouad Ismail IsmailFouad Ismail Ismail
Fouad Ismail Ismail
Nadzhratul HusnaNadzhratul Husna
Nadzhratul Husna
Syed Ahmad FarhanSyed Ahmad Farhan
Syed Ahmad Farhan
NSNasir Shafiq
Nasir Shafiq
EAElsayed Ateya
Elsayed Ateya
Effective and reliable force transfer between steel reinforcing bars and concrete is necessary for reinforced concrete buildings to be designed as efficiently as possible. Significant reductions in load capacity and structural rigidity could be the outcome of inadequate connection between the bars and concrete. With the recent discovery of graphene, new opportunities for the development of nano-sized cementitious additives have emerged. The present study investigates the effect of graphene nanoplatelets (GnP) on the bond stress capacity of steel reinforcing bars embedded in GnP-enhanced high-performance concrete (HPC). Effects of various GnP contents and diameter and embedded length of the bar were evaluated. Bond stress-slip behaviour between the bar and concrete was examined by performing pull out tests on cylindrical samples. Findings revealed that the GnP-enhanced HPC improved the bond stress owing to the confinement and bridging effects of GnP. Addition of GnP at the concentration of 0.02 % increased the bond stress by more than 41.28, 18.9 and 53.90% for steel bars with diameters of 10, 12 and 16 mm, respectively, at the same bar embedded length. Presence of GnP reduced the initial slip of the bar owing to the improved adhesion between the bar and the surrounding concrete.