Ultrafast X-ray computed tomography is an advanced imaging technique for multiphase flows. It has been used with great success for studying gas–liquid as well as gas–solid flows. Here, we apply this technique to analyze density-driven particle segregation in a rotating drum as an exemplary use case for analyzing industrial particle mixing systems. As glass particles are used as the denser of two granular species to be mixed, beam hardening artefacts occur and hamper the data analysis. In the general case of a distribution of arbitrary materials, the inverse problem of image reconstruction with energy-dependent attenuation is often ill-posed. Consequently, commonly known beam hardening correction algorithms are often quite complex. In our case, however, the number of materials is limited. We therefore propose a correction algorithm simplified by taking advantage of the known material properties, and demonstrate its ability to improve image quality and subsequent analyses significantly.
Granular mixing, ubiquitous in industry, is difficult to observe. Ultrafast X-ray computed tomography is a relatively new technique that can be used to study rapid granular flows in opaque systems. A comparative study is here presented, where ultrafast X-ray computed tomography, camera and simulation with the Discrete Element Method are simultaneously used to investigate the radial segregation of 4-mm spherical polypropylene and glass beads in a rotating drum. The drum filling is varied from 20 to 50%. The granular flow and the associated segregation dynamics at the front-end wall and in the bulk are compared and good agreement among the three methods is found. Similar to unary systems, a transition from the rolling to the sliding regime, characterized by a critical dynamic angle of repose, is also reported.