Gas entrainment into centrifugal pumps decreases pump performance and may raise safety issues, e.g., through insufficient cooling. Although there is some phenomenological knowledge in the form of correlations between operating parameters and pump performance, a further understanding via direct observation of the gas–liquid mixture was so far not possible. In this paper, we demonstrate the capability of ultrafast X-ray computed tomography (UFXCT) to disclose gas–liquid two-phase flow dynamics in the impeller region of a centrifugal pump mockup. Experiments were performed for gas injection at impeller speeds between 1300 rpm and 1600 rpm. We analyzed the X-ray image sequences with respect to characteristics of the gas distribution and compared them with time-averaged image data of a real pump obtained earlier with gamma-ray computed tomography (CT).
The outflow of granular materials from storage containers with narrow outlets is studied by means of ultrafast x-ray computed tomography (UFXCT). The used acquisition speed of this tomograph is high enough to allow high-speed recording of two horizontal cross sections (each of them at a rate of 1000 images per second) of the container during the discharge of material. Analyzing space-time plots that were generated from the tomograms, we retrieve velocity profiles and packing structures in the container. We compare hard spherical grains with soft, low-friction hydrogel spheres. Their flow profiles are qualitatively different. While the hard spheres form stagnant zones at the container side walls, the hydrogel spheres with extremely low friction coefficient flow in all regions of the container. Moreover, a shell-like positional arrangement of the soft spheres induced by the container walls is revealed. The results obtained for the flow field structure confirm earlier conclusions drawn from sequences of x-ray tomograms of clogged states.
28 June 2019 in Measurement Science and Technology
Ultrafast electron beam x-ray computed tomography (UFXCT) has in recent years become an indispensable tool for multiphase flow studies. An essential feature of this technique is fast cross-sectional imaging in two distinct planes. Both the spatial location of focal spot path and detectors as well as the angular scanning range in UFXCT differ from that of conventional x-ray CT systems. This brings in a spatial dependence in axial scanning position and resolution. In this paper, we present an analysis of this problem, which results in an improved description of the location and shape of the imaging regions, a more accurate map of the distance between the imaging planes and, finally, a higher precision in the determination of axial structure velocities. The benefit of this improved approach is exemplarily demonstrated for a two-phase pipe flow around an obstacle.
Ultrafast X-ray computed tomography is an advanced imaging technique for multiphase flows. It has been used with great success for studying gas–liquid as well as gas–solid flows. Here, we apply this technique to analyze density-driven particle segregation in a rotating drum as an exemplary use case for analyzing industrial particle mixing systems. As glass particles are used as the denser of two granular species to be mixed, beam hardening artefacts occur and hamper the data analysis. In the general case of a distribution of arbitrary materials, the inverse problem of image reconstruction with energy-dependent attenuation is often ill-posed. Consequently, commonly known beam hardening correction algorithms are often quite complex. In our case, however, the number of materials is limited. We therefore propose a correction algorithm simplified by taking advantage of the known material properties, and demonstrate its ability to improve image quality and subsequent analyses significantly.
1 July 2019 in Transactions of the Institute of Measurement and Control
In this paper, a novel approach for tracking moving structures in multiphase flows over larger axial ranges is presented, which at the same time allows imaging the tracked structures and their environment. For this purpose, ultrafast electron beam X-ray computed tomography (UFXCT) is being extended by an image-based position control. Application is scanning and tracking of, for example, bubbles, particles, waves and other features of multiphase flows within vessels and pipes. Therefore, the scanner has to be automatically traversed with the moving structure basing on real-time scanning, image reconstruction and image data processing. In this paper, requirements and different strategies for reliable object tracking in dual image plane imaging mode are discussed. Promising tracking strategies have been numerically implemented and evaluated.
In this paper, a smart detector design for novel multi-plane ultrafast electron beam X-ray computed tomography is presented. The concept is based on multi-plane electron beam scanning on a transparent X-ray target and elongated cuboid-shape scintillation detectors for radiation detection over an extended axial scanning range. The optical part of the scintillation detector acts as both an X-ray sensitive scintillator with a fast time response and a light guide. With that, we reduce detector complexity, number of detector elements, overall power consumption, and detector costs. We investigated the performance of this new multi-plane detector design with an evaluation detector setup that is made of cerium doped lutetium yttrium oxyorthosilicate (LYSO:Ce) as scintillation material and an avalanche photodiode (APD) array. Thereby, we assessed two design variants: A monolithic LYSO bar detector and a sandwich detector made of multiple LYSO crystals and glass light-guides. Both types reveal excellent linear detector responses, long-term stabilities, and comparable signal qualities.