Implementation of construction works on weak (e.g., compressible, collapsible, expansive) soils such as peatlands often is limited by logistics of equipment and shortage of available and applicable materials. If preloading or floating roads on geogrid reinforcement or piled embankments cannot be implemented, then soil stabilization is needed. Sustainable soil stabilization in an environmentally friendly way is recommended instead of applying known conventional methods such as pure cementing or excavation and a single replacement of soils. Substitution of conventional material (cement) and primary raw material (lime) with secondary raw material (waste and byproducts from industries) corresponds to the Sustainable Development Goals set by the United Nations, preserves resources, saves energy, and reduces greenhouse gas emissions. Besides traditional material usage, soil stabilization is achievable through various secondary raw materials (listed according to their groups and subgroups): 1. thermally treated waste products: 1.1. ashes from agriculture production; 1.2. ashes from energy production; 1.3. ashes from various manufacturing; 1.4. ashes from waste processing; 1.5. high carbon content pyrolysis products; 2. untreated waste and new products made from secondary raw materials: 2.1. waste from municipal waste biological treatment and landfills; 2.2. waste from industries; 3. new products made from secondary raw materials: 3.1. composite materials. Efficient solutions in environmental engineering may eliminate excessive amounts of waste and support innovation in the circular economy for sustainable future.

Using kukersite oil shale ash for the stabilization of organic-rich soils has been extensively studied but without much success. The main reason for this is the retarding effect of humic acids present in organic-rich soils on the formation of the C–S–H (calcium–silicate–hydrate) phase, which effectively prevents the solidification of cementitious materials in peat soils. Based on the studies performed at the University of Tartu, we have developed a novel method for the in situ mass stabilization of peat soils using waste materials (calcareous fly ash and silica fume). In this manner, the perfect hardening of peat–ash mixtures (to each 1 m³ of soil, 150–400 kg ash, 25–50 L pozzolanic additives, and 2.5–5 kaNaOH were added) can be achieved. A test road embankment was constructed under extremely hard conditions in a peat quarry that is currently in use.

Construction of road embankments in peatlands commonly involves replacement of the peat with a fill-up soil of an adequate load-bearing capacity. This usually requires a lowering of the water level, turning a peatland from a carbon sink to a source of greenhouse gases. Thus, alternatives are sought that are less costly in both economic and ecological terms. Mass-stabilization technology can provide a cheap substitute for Portland cement. Calcareous ashes (waste materials), supplemented with pozzolanic and alkali additives to facilitate and accelerate the setting and hardening processes, are attractive alternatives to soil excavation or replacement techniques. Silica fume and waterglass were used as pozzolanic agents and KOH as a soil-alkalizing agent. X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analyses and stress–strain tests were performed for the hardened samples. Crystallization of alkali feldspars was observed in all test samples. Comparable hardening of peat soil was achieved for both ashes. It was shown that the ashes of Estonian kukersite (oil shale) from both pulverized firing and a circulating fluidized bed incineration process (produced in energy sector as quantitatively major solid waste in Estonia) can be used as binding agents for peat stabilization, even without the addition of Portland cement. Hardened peat soil samples behaved as a ductile material, and the cellulose fibers naturally present in peat gave the peat–ash composite plasticity, acting mechanically in the same way as the steel or glass fiber in ordinary reinforced concrete. The effect of peat fiber reinforcement was higher in cases of higher load and displacement of the composite, making the material usable in ecological constructions.

A modern, environmentally friendly urban lifestyle requires paying attention to landscaping and green areas. The scarcity of free land in cities and the high price of land require the combination of greenery with buildings—both vertically and horizontally. The developed green technology for construction brings together computer numerical control (CNC) processing of supporting structures and prefabricated solid planting blocks made of concrete composite. The timber structures are fixed together using traditional carpentry joints. The details, which will be manufactured in the factory using CNC processing at a controlled temperature and humidity corresponding to indoor conditions, can be easily assembled on the construction site. The high bending strength but good elasticity and connections of carpentry joints endow the structure with good properties in a non-controllable environment. By combining CNC-processed wooden structures with concrete technology as substrate composites, labor-intensive manual work in landscaping and gardening will be reduced in the future. The novel material-hardening substrate composite material uses only the residues as the raw materials.

Traditional wood protection methods involving fire retardants and preservative paints have limitations, requiring periodic renewal during a building’s lifecycle and generating hazardous waste post-use. This study aims to achieve a multifaceted solution, simultaneously enhancing wood’s resistance to fire, fungi, and insects using natural and/or recycled mineral waste components containing lime that react with pozzolanic additives. Additionally, organic humates provide protection against pests (fungi and insects). Following the crystallization processes within the wood’s structure, it exhibits increased resistance to fire, as demonstrated by tests involving seven species. The study also describes wood tolerance tests against termites (Reticulitermes flavipes) that yielded promising results, indicating that the treated wood is an unsuitable habitat for these pests. An additional advantage for the timber industry is that the crystallized composite filling the wood’s pores minimizes wood stitching and reduces internal stresses during the drying process. This property enhances the utility of timber in frame structures and carpentry joints, which are less susceptible to moisture-induced movements. The timber impregnated by our method can also be repurposed or disposed of as non-hazardous waste. This research thus offers an eco-friendly and effective approach to wood protection.