Toqeer Ahmed

Mr. Toqeer Ahmed

National University of Sciences and Technology, Islamabad, Islāmābād, Pakistan
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2021 in IEEE Access
Verified
Journal Article
Open access
TAToqeer Ahmed
Toqeer Ahmed
AWAsad Waqar
Asad Waqar
Rajvikram Madurai ElavarasanRajvikram Madurai Elavarasan
Rajvikram Madurai Elavarasan
JIJunaid Imtiaz
Junaid Imtiaz
Premkumar MPremkumar M
Premkumar M
Umashankar SubramaniamUmashankar Subramaniam
Umashankar Subramaniam
At present, the disturbances like the voltage fluctuations, resulting from the grid’s complexities and unbalanced load conditions, create severe power quality concerns like total harmonic distortion (THD) and voltage unbalance factor (VUF) of the grid voltage. Though the custom power devices such as distribution-static compensators (D-STATCOMs) improve these power quality concerns, however, the accompanying controller plays the substantial role. Therefore, this paper proposes a fractional-order sliding mode control (FOSMC) for a D-STATCOM to compensate the low power distribution system by injecting/absorbing a specific extent of the reactive power under disturbances. FOSMC is a non-linear robust control in which the sliding surface is designed by using the Riemann-Liouville ( RL ) function and the chattering phenomenon is minimized by using the exponential reaching law. The stability of FOSMC is evidenced by employing the Lyapunov stability criteria. Moreover, the performance of the proposed FOSMC is further accessed while doing its parametric variations. The complete system is demonstrated with a model of 400V, 180kVA radial distributor along with D-STATCOM under two test scenarios in MATLAB/Simulink environment. The results of the proposed controller are compared with the fixed frequency sliding mode control (FFSMC) and conventional proportional-integral (PI) control. The results validate the superiority of the proposed controller in terms of rapid tracking, fast convergence, and overall damping with very low THD and VUF.

29 September 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Yasir BasheerYasir Basheer
Yasir Basheer
AWAsad Waqar
Asad Waqar
Saeed Mian QaisarSaeed Mian Qaisar
Saeed Mian Qaisar
TAToqeer Ahmed
Toqeer Ahmed
NUNasim Ullah
Nasim Ullah
SASattam Alotaibi
Sattam Alotaibi
Cement manufacturing is one of the most energy-intensive industries in the world. Most of the cost of producing cement is accounted for in terms of fuel consumption and power expenditure. Thermal power plants are a significant contributor to electricity generation in countries such as Pakistan. They are, however, inherently inefficient, and environmentally unfriendly. In this paper, the authors investigated the possibility of delivering hybrid energy to Pakistani cement plants. Five cement plants—Askari Cement Plant, Wah (ACPW); Bestway Cement Plant, Kalar Kahar (BCPKK); Bestway Cement Plant, Farooqia (BCPF); Bestway Cement Plant, Hattar (BCPH); and DG Cement Plant, Chakwal (DGCPC)—were selected. The possibility of implementing the four off-grid hybrid energy models (HEMs) was investigated for the intended cement plants, using HOMER Pro software. A multi-criteria decision analysis (MCDA) was carried out, based on objectives including the net present cost (NPC), the levelized cost of electricity (LCOE), and greenhouse gas (GHG) emissions. HEM-1 was comprised of PV, converter, and a fuel cell. HEM-2 had only a diesel generator, and acted as a base case in this study. HEM-3 had solar panels and a battery-converter system. In HEM-4, diesel generators, PV, and converters were considered. Based on the NPC, the optimal model was HEM-4, having a 0.249 USD/KWh LCOE in islanded systems. The NPC and operating costs were USD 540 M and USD 32.5 M per year, respectively, with a 29.80% reduction in the CO2 emissions compared to the base case. Based on the GHG emission, HEM-1 and HEM-3 were the best models, with 0% GHG emissions. The results confirmed that the proposed HEMs can sustainably provide electricity for 24 h a day to the sites under consideration, with minimum objectives.

15 April 2021 in International Transactions on Electrical Energy Systems
Verified
Journal Article
Closed access
PDF file
AIAhsan Iqbal
Ahsan Iqbal
AWAsad Waqar
Asad Waqar
Rajvikram Madurai ElavarasanRajvikram Madurai Elavarasan
Rajvikram Madurai Elavarasan
Premkumar MPremkumar M
Premkumar M
TAToqeer Ahmed
Toqeer Ahmed
Saad MekhilefSaad Mekhilef
Saad Mekhilef

1 January 2020 in CSEE Journal of Power and Energy Systems
Verified
Journal Article
Closed access
TAToqeer Ahmed
Toqeer Ahmed

26 September 2021
Verified
Conference Paper
Closed access
MWMuhammad Waqas
Muhammad Waqas
TAToqeer Ahmed
Toqeer Ahmed
RERajvikram Madurai Elavarasan
Rajvikram Madurai Elavarasan
AWAsad Waqar
Asad Waqar
KLKenneth Leong
Kenneth Leong
MJMuhammad Waqas Jeelani
Muhammad Waqas Jeelani
Direct quadrature (DQ) synchronous reference frame transformation-based current controllers are utilized due to their superior performance, while they drive on dc quantities, attaining zero steady-state error, and are highly compatible for single-phase grid-tied inverters. Therefore, in this paper, the DQ reference frame is used to control active and reactive power by employing proportional Integral (PI) control in a single-phase grid-tied inverter. By using the phase-locked loop (PLL), the injected grid current and voltages are set to be in phase. An LCL filter is applied at inverter output to reduce the harmonics. The LCL filter is designed from the perspective of control for active and reactive power, and total harmonic distortion (THD). The MATLAB/Simulink based simulation results are presented, while the output of the inverter is controlled to meet the desired load active and reactive power requirement. The simulation outcomes depict the efficiency of the proposed PI control strategy regarding a low THD of 1.68% and a steady-state time of 0.03s.

26 September 2021
Verified
Conference Paper
Closed access
RSRawal Shahbaz
Rawal Shahbaz
TAToqeer Ahmed
Toqeer Ahmed
RERajvikram Madurai Elavarasan
Rajvikram Madurai Elavarasan
KRKannadasan Raju
Kannadasan Raju
MWMuhammad Waqas
Muhammad Waqas
USUmashankar Subramaniam
Umashankar Subramaniam
Multilevel inverters are powerful electronic devices that are used for the conversion of DC input voltage into AC output voltage and mostly used in medium and high voltage operations. In these operations, pulse width modulation (PWM) frequency is distorted because of electromagnetic interference (EMI) and switching losses which are caused by dv/dt stress. To achieve a pure sinusoidal waveform at output of multilevel inverter is a primary purpose so that a smaller number of harmonic contents are produced. Selective harmonic elimination PWM technique is used in cascaded multilevel inverter for the mitigation of lower harmonics by solving nonlinear transcendental equations and maintains the required fundamental voltage. An objective function is derived from SHE problem to calculate switching angles. For the solution of objective function, optimization approach such as bio-inspired intelligent algorithms are used. In this paper, Genetic Algorithm (GA), Particle Swarm Optimization (PSO) and Bee Algorithm (BA) are used to determine the optimum switching angles for cascaded multilevel inverters to get low total harmonic distortion (THD) in output voltage. These computed angles are analyzed in MATLAB simulation model to authenticate the results. And there will be direct comparison among these algorithms.