Zhanerke Katrenova

Mrs. Zhanerke Katrenova

Nazarbayev University, Nur-Sultan, Astana, Kazakhstan
orcid
PhD student in EE

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 November 2022 in Sensors
Verified
Journal Article
Open access
PDF file
ZKZhanerke Katrenova
Zhanerke Katrenova
Shakhrizat AlisherovShakhrizat Alisherov
Shakhrizat Alisherov
Turar AbdolTurar Abdol
Turar Abdol
MYMadina Yergibay
Madina Yergibay
Zhanat KappassovZhanat Kappassov
Zhanat Kappassov
CMCarlo Molardi
Carlo Molardi
Fiber-optic sensors are a powerful tool to investigate physical properties like temperature, strain, and pressure. Such properties make these sensors interesting for many applications including biomedical applications. Fiber sensors are also a great platform for distributed sensing by using the principles of optical frequency domain reflectometry. Distributed sensing is becoming more and more used to achieve high-resolution measurements and to map physical properties of biomaterials at small scale, thus obtaining 2D and 3D mapping of a particular area of interest. This work aims at building and investigating a 2D sensing carpet based on a distributed fiber sensing technique, to map local pressure applied to the carpet. The two-dimensional mapping is obtained by embedding a single-mode optical fiber inside a soft silicone carpet. The fiber has been bent and arranged in a specific configuration characterized by several parallel lines. Different fiber fixation methods have been investigated by means of a comparative analysis to perform better characterization and to achieve a more precise response of the carpet. The best pressure sensitivity coefficient (0.373 pm/kPa or considering our setup 1.165 nm/kg) was detected when the fiber was fully embedded inside the silicone carpet. This paper demonstrates the possibility of mapping a 2D distributed pressure over a surface with a resolution of 2 mm by 2 mm. The surface of investigation is 2 cm by 6 cm, containing 310 sensing points. The sensing carpet has been validated selecting several preferential positions, by testing the consistency of the results over different portions of the carpet.

31 December 2025 in Biosensors
Verified
Journal Article
Open access
PDF file
AOAigerim Omirzakova
Aigerim Omirzakova
LMLyazzat Mukhangaliyeva
Lyazzat Mukhangaliyeva
ZKZhanerke Katrenova
Zhanerke Katrenova
AAAida Aituganova
Aida Aituganova
ABAliya Bekmurzayeva
Aliya Bekmurzayeva
ZAZhannat Ashikbayeva
Zhannat Ashikbayeva
Optical fibers are gaining increasing attention in biomedical applications due to their unique advantages, including flexibility, biocompatibility, immunity to electromagnetic interference, potential for miniaturization, and the ability to perform remote, real-time, and in situ sensing. Label-free optical fiber biosensors represent a promising alternative to conventional cancer diagnostics, offering comparable sensitivity and specificity while enabling real-time detection at ultra-low concentrations without the need for complex labeling procedures. However, the sensing performance of biosensors is fundamentally governed by surface modification. The choice of optimal functionalization strategy is dictated by the sensor type, target biomarker, and detection environment. This review paper presents a comprehensive and expanded overview of various surface functionalization methods specifically designed for cancer biomarker detection using optical fiber biosensors, including silanization, self-assembled monolayers, polymer-based coatings, and different dimensional nanomaterials (0D, 1D, and 2D). Furthermore, the emerging integration of computational methods and machine learning in optimizing functionalized optical sensing has been discussed. To the best of our knowledge, this is the first work that consolidates existing surface modification approaches into a single, cohesive resource, providing valuable insights for researchers developing next-generation fiber optic biosensors for cancer diagnostics. Moreover, the paper points out the current technical challenges and outlines the future perspectives of optical fiber-based biosensors.

15 January 2024 in Sensors
Verified
Journal Article
Open access
PDF file
ZKZhanerke Katrenova
Zhanerke Katrenova
Shakhrizat AlisherovShakhrizat Alisherov
Shakhrizat Alisherov
MYMadina Yergibay
Madina Yergibay
Zhanat KappassovZhanat Kappassov
Zhanat Kappassov
Wilfried BlancWilfried Blanc
Wilfried Blanc
CMCarlo Molardi
Carlo Molardi
Bite force measurements are crucial in the realm of biomedical research, particularly in the areas of dentistry and orthodontic care. Various intraoral devices have been used to assess biting force, but each has limitations and drawbacks. Fiber optic sensors (FOSs) offer advantages such as electrical inertness, immunity to electromagnetic interference, and high sensitivity. Distributed fiber optic sensing allows an increase in the number of sensing points and can interrogate numerous reflections from scattering events within an optical fiber. We present four dental bites with heights of 6 mm, which enabled bilateral measurements. U-shaped sensors were prepared by embedding fibers into silicone by folding a single-mode fiber into four lines and multiplexing eight parallel nanoparticle-doped fibers. Dental bite models were created using two silicone materials (Sorta Clear 18 and Sorta Clear 40). The developed sensors were calibrated by applying weights up to 900 g, resulting in a linear response. Experiments were conducted to compare the efficacy of the dental bites. The collection of massive data was enabled by constructing a 2D map of the dental bites during multi-point sensing.

19 December 2022
Verified
Conference Paper
Closed access
PDF file
ZKZhanerke Katrenova
Zhanerke Katrenova
Shakhrizat AlisherovShakhrizat Alisherov
Shakhrizat Alisherov
TATurar Abdol
Turar Abdol
MYMadina Yergibay
Madina Yergibay
ZKZhanat Kappassov
Zhanat Kappassov
CMCarlo Molardi
Carlo Molardi
On the basis of Optical Frequency Domain Reflectometry (OFDR) principles, Optical Backscatter Reflectometry (OBR) is able to convert a simple and cheap single mode fiber (SMF) into an effective spatially distributed sensor of temperature and strain. By using different spatial configurations of SMFs, it can be obtained a 2D sensing map of applied forces over a delimited surface. This can be useful in biomedical applications such as force byte measurement. Here, a 2D pressure sensing map, based on distributed fiber optic sensing technique, is presented. The two-dimensional approach is achieved by bending the optical fiber along the surface to get ten lines embedded in silicone material, thus obtaining a carpet of 2 by 6 cm. The highly resolved sensing map is achieved by setting fiber lines 2 mm apart from each other with a sensing range of 2 mm over the fiber. The distributed strain, detected by the embedded fiber, is then converted into a pressure map. The pressure sensitivity coefficient of the map has been successfully characterized. The setup has been validated for surface measurement of wavelength shift values over 9 points on the sensing carpet with 310 total sensing points (10 fiber lines, each having 31 sensing points per 6 cm length). The peculiarity of sensing surfaces based on their mechanical properties gives an opportunity for improved response to curvature due to the embedding or attaching the sensor to irregular shapes and geometries.

27 November 2023
Verified
Conference Paper
Closed access
PDF file
ZKZhanerke Katrenova
Zhanerke Katrenova
Shakhrizat AlisherovShakhrizat Alisherov
Shakhrizat Alisherov
MYMadina Yergibay
Madina Yergibay
Zhanat KappassovZhanat Kappassov
Zhanat Kappassov
Daniele TosiDaniele Tosi
Daniele Tosi
CMCarlo Molardi
Carlo Molardi
Measuring bite force gives important information about the performance of the jaw muscles. Enhancement of bite force measurements, particularly 2D force mapping, can be achieved through the application of advanced distributed fiber optics sensing techniques, which present the capability to acquire high resolution measurements. Optical Backscatter Reflectometry (OBR), based on the principles of Optical Frequency Domain Reflectometry (OFDR), is the key to achieve spatially distributed measurements and transform a single-mode fiber (SMF) into a cost-effective minimally invasive sensor. The OBR interrogator, manufactured by LUNA, catches the light backscattered by each section of the fiber and detects the spectral variation induced by the stain and pressure application. We have developed two methods to construct a two-dimensional map of the applied bite force. In the first a SMF has been bent into four lines and embedded into a silicone mouthguard. In the second approach we used massive Scattering‑Level Multiplexing (SLMux), which exploits fibers with different scattering levels: a standard low scattering SMF to enable the multiplexing, and a MgO‑nanoparticles doped fibers with a 40 dB higher scattering for sensing purposes. The setup with eight multiplexed fibers allows to obtain bite force mapping for each side of the jaw by embedding four fibers for left and right sides. The pressure sensitivity coefficient of the maps has been effectively calculated. The setup has been validated for 2D force mapping over the silicone mouthguard with millimeter resolution. The capability of optical fiber to be multiplexed and embedded in non-uniform geometries results in a high resolved and precise 2D bite force reconstruction.

6 March 2023
Verified
Conference Paper
Closed access
PDF file
ZKZhanerke Katrenova
Zhanerke Katrenova
Shakhrizat AlisherovShakhrizat Alisherov
Shakhrizat Alisherov
TATurar Abdol
Turar Abdol
MYMadina Yergibay
Madina Yergibay
ZKZhanat Kappassov
Zhanat Kappassov
CMCarlo Molardi
Carlo Molardi
Optical Backscatter Reflectometry (OBR) is capable of converting a simple and inexpensive single mode fiber (SMF) into an effective spatially distributed sensor of temperature and strain based on the concepts of Optical Frequency Domain Reflectometry (OFDR). A 2D sensing map of applied forces over a defined surface may be created by employing different spatial configurations of SMFs. This can be beneficial in biological applications such as measuring bite force. In this paper a 2D pressure sensing map based on distributed fiber optic sensing is provided. The two dimensional technique is performed by bending the optical fiber along the surface to acquire ten lines embedded in silicone material, thereby generating a carpet of 2 by 6 cm. The highly resolved sensing map is created by spacing fiber lines 2 mm apart with a sensing range of 2 mm across the fiber. The embedded fiber detects distributed strain, which is subsequently transformed into a pressure map. The dependence of strain on the toughness of silicone material was observed. The map's pressure sensitivity coefficient has been effectively identified. The setup has been validated for surface measurement of wavelength shift values over 9 sensor carpet locations with a total of 310 sensing points. Since the sensor is embedded or attached to irregular forms and geometries, the distinctiveness of sensing surfaces allows for enhanced responsiveness to curvature due to its mechanical characteristics.